Discussion:
X710 / i40e interface resets
(too old to reply)
Christian Ruppert
2015-07-27 15:46:58 UTC
Permalink
Hi List,

after having some serious issues with the X520 ones I wanted to give the
X710 a try. At first I had some trouble again. Started to flap sometimes
and later flapping until VRRP switched to a different host. The Kernel
log was spammed with:
Jul 24 12:02:10 somehost kernel: [ 1446.325468] i40e 0000:02:00.0: TX
driver issue detected, PF reset issued
Jul 24 12:02:11 somehost kernel: [ 1447.154720] i40e 0000:02:00.0: FCoE
capability is disabled
Jul 24 12:02:11 somehost kernel: [ 1447.196823] i40e 0000:02:00.0: PHC
enabled
Jul 24 12:02:11 somehost kernel: [ 1447.255115] i40e 0000:02:00.0:
enabling bridge mode: VEPA
Jul 24 12:02:11 somehost kernel: [ 1447.267922] i40e 0000:02:00.0 eth0:
NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

and:
Jul 24 12:16:08 somehost kernel: [ 2285.524925] i40e 0000:02:00.0: FD
filter space full, new ntuple rules will not be added
Jul 24 12:16:09 somehost kernel: [ 2286.348784] i40e 0000:02:00.0: FD
Filter table flushed and FD-SB replayed.
Jul 24 12:16:09 somehost kernel: [ 2286.356063] i40e 0000:02:00.0: FD
Sideband/ntuple is being enabled since we have space in the table now
Jul 24 12:16:09 somehost kernel: [ 2286.365777] i40e 0000:02:00.0: ATR
is being enabled since we have space in the table now

Then I read something about updating the NVM/preboot (here on the ML)
which I did then. After having some issues with flashing (the update
utility doesn't like
CONFIG_STRICT_DEVMEM=y, there's also no warning about it. disabling it
did help but not entirely) I decided to flash from a Windows host (I had
to setup one...) as it seemed somewhat easier and safer, for now.
The preboot util still complained about having an older NVM than
expected but somehow it worked and it's a more recent version now than
it was before. So here is the initialization of the 20.2
version/revision and also using the most recent 1.2.48 driver on a
3.18.17 Kernel:

Jul 24 11:38:13 somehost kernel: [ 2.251951] i40e: Intel(R) Ethernet
Connection XL710 Network Driver - version 1.2.48
Jul 24 11:38:13 somehost kernel: [ 2.259620] i40e: Copyright (c) 2013
- 2015 Intel Corporation.
Jul 24 11:38:13 somehost kernel: [ 2.283072] i40e 0000:02:00.0:
f4.33.31377 a1.2 n4.42 e191b
Jul 24 11:38:13 somehost kernel: [ 2.528098] i40e 0000:02:00.0: FCoE
capability is disabled
Jul 24 11:38:13 somehost kernel: [ 2.541226] i40e 0000:02:00.0: MAC
address: 68:05:ca:33:17:50
Jul 24 11:38:13 somehost kernel: [ 2.545296] i40e 0000:02:00.0: SAN
MAC: 68:05:ca:33:17:52
Jul 24 11:38:13 somehost kernel: [ 2.559708] i40e 0000:02:00.0: fcoe
queues = 0
Jul 24 11:38:13 somehost kernel: [ 2.588853] i40e 0000:02:00.0:
enabling bridge mode: VEPA
Jul 24 11:38:13 somehost kernel: [ 2.623476] i40e 0000:02:00.0: PHC
enabled
Jul 24 11:38:13 somehost kernel: [ 2.639801] i40e 0000:02:00.0:
PCI-Express: Speed 8.0GT/s Width x8
Jul 24 11:38:13 somehost kernel: [ 2.653156] i40e 0000:02:00.0:
Features: PF-id[0] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB
NTUPLE DCB PTP
Jul 24 11:38:13 somehost kernel: [ 2.672182] i40e 0000:02:00.1:
f4.33.31377 a1.2 n4.42 e191b
Jul 24 11:38:13 somehost kernel: [ 2.921075] i40e 0000:02:00.1: FCoE
capability is disabled
Jul 24 11:38:13 somehost kernel: [ 2.935064] i40e 0000:02:00.1: MAC
address: 68:05:ca:33:17:51
Jul 24 11:38:13 somehost kernel: [ 2.944833] i40e 0000:02:00.1: SAN
MAC: 68:05:ca:33:17:53
Jul 24 11:38:13 somehost kernel: [ 2.971041] i40e 0000:02:00.1: fcoe
queues = 0
Jul 24 11:38:13 somehost kernel: [ 3.004728] i40e 0000:02:00.1:
enabling bridge mode: VEPA
Jul 24 11:38:13 somehost kernel: [ 3.290178] i40e 0000:02:00.1: PHC
enabled
Jul 24 11:38:13 somehost kernel: [ 3.310646] i40e 0000:02:00.1:
PCI-Express: Speed 8.0GT/s Width x8
Jul 24 11:38:13 somehost kernel: [ 3.331079] i40e 0000:02:00.1:
Features: PF-id[1] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB
NTUPLE DCB PTP
Jul 24 11:38:13 somehost kernel: [ 4.279754] i40e 0000:02:00.1
rename5: renamed from eth3
Jul 24 11:38:13 somehost kernel: [ 4.315533] i40e 0000:02:00.0 eth0:
renamed from eth1
Jul 24 11:38:13 somehost kernel: [ 4.387610] i40e 0000:02:00.1 eth1:
renamed from rename5
Jul 24 11:38:13 somehost kernel: [ 6.276102] i40e 0000:02:00.0 eth0:
NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jul 24 11:38:14 somehost kernel: [ 8.396154] i40e 0000:02:00.1 eth1:
NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

The above mentioned issues are still persistent even though less
frequent and it's running about 3 days now without flapping that much
that the VRRP switches to a different host. I'm not happy yet as it's
still flapping and complaining about ntuple/ATR and such. Can I somehow
help (by providing the necessary details) to get those issues fixed?

# ethtool -i eth0
driver: i40e
version: 1.2.48
firmware-version: f4.33.31377 a1.2 n4.42 e191b
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

# ethtool -k eth0
Features for eth0:
rx-checksumming: on
tx-checksumming: on
tx-checksum-ipv4: on
tx-checksum-ip-generic: off [fixed]
tx-checksum-ipv6: on
tx-checksum-fcoe-crc: off [fixed]
tx-checksum-sctp: on
scatter-gather: on
tx-scatter-gather: on
tx-scatter-gather-fraglist: off [fixed]
tcp-segmentation-offload: on
tx-tcp-segmentation: on
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
udp-fragmentation-offload: off [fixed]
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off [fixed]
rx-vlan-offload: on
tx-vlan-offload: on
ntuple-filters: on
receive-hashing: on
highdma: on
rx-vlan-filter: on
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
netns-local: off [fixed]
tx-gso-robust: off [fixed]
tx-fcoe-segmentation: off [fixed]
tx-gre-segmentation: off [fixed]
tx-ipip-segmentation: off [fixed]
tx-sit-segmentation: off [fixed]
tx-udp_tnl-segmentation: on
tx-mpls-segmentation: off [fixed]
fcoe-mtu: off [fixed]
tx-nocache-copy: off
loopback: off [fixed]
rx-fcs: off [fixed]
rx-all: off [fixed]
tx-vlan-stag-hw-insert: off [fixed]
rx-vlan-stag-hw-parse: off [fixed]
rx-vlan-stag-filter: off [fixed]
l2-fwd-offload: off [fixed]
busy-poll: off [fixed]

# lspci -nvv
02:00.1 0200: 8086:1572 (rev 01)
Subsystem: 8086:0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c2e000000 (64-bit, prefetchable) [size=8M]
Region 3: Memory at c2f800000 (64-bit, prefetchable) [size=32K]
Expansion ROM at dfa00000 [disabled] [size=512K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=129 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00001000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <512ns, L1
<64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend+
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Latency L0 <2us, L1
<16us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [e0] Vital Product Data
Product Name: XL710 40GbE Controller
Read-only fields:
[PN] Part number:
[EC] Engineering changes:
[FG] Unknown:
[LC] Unknown:
[MN] Manufacture ID:
[PG] Unknown:
[SN] Serial number:
[V0] Vendor specific:
[RV] Reserved: checksum good, 0 byte(s) reserved
Read/write fields:
[V1] Vendor specific:
End
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 50-17-33-ff-ff-ca-05-68
Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
IOVSta: Migration-
Initial VFs: 64, Total VFs: 64, Number of VFs: 0, Function Dependency
Link: 01
VF offset: 335, stride: 1, Device ID: 154c
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 0000000c2f000000 (64-bit, prefetchable)
Region 3: Memory at 0000000c2f810000 (64-bit, prefetchable)
VF Migration: offset: 00000000, BIR: 0
Capabilities: [1a0 v1] Transaction Processing Hints
Device specific mode supported
No steering table available
Capabilities: [1b0 v1] Access Control Services
ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd-
EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd-
EgressCtrl- DirectTrans-
Kernel driver in use: i40e

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Rose, Gregory V
2015-07-27 16:02:22 UTC
Permalink
So to make sure I've got your report right... Since updating the FW the link flap issue occurs much less frequently and VRRP is not causing a switch to a different host but your log is getting spammed with ATR messages. Is that correct?

Have you tried turning off ntuple-filters?

As for the link flap I don't think we've seen a lot of customers running the XL710 at 1Gbps speeds, most are using the 10Gbps or 40Gbps speeds. I'll do some research and see if there are any other reports of issues with the XL710 running at 1Gbps speed and get back to you.

- Greg

> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Monday, July 27, 2015 8:47 AM
> To: e1000-***@lists.sf.net
> Subject: [E1000-devel] X710 / i40e interface resets
>
> Hi List,
>
> after having some serious issues with the X520 ones I wanted to give the
> X710 a try. At first I had some trouble again. Started to flap sometimes
> and later flapping until VRRP switched to a different host. The Kernel log
> was spammed with:
> Jul 24 12:02:10 somehost kernel: [ 1446.325468] i40e 0000:02:00.0: TX
> driver issue detected, PF reset issued Jul 24 12:02:11 somehost kernel: [
> 1447.154720] i40e 0000:02:00.0: FCoE capability is disabled Jul 24
> 12:02:11 somehost kernel: [ 1447.196823] i40e 0000:02:00.0: PHC enabled
> Jul 24 12:02:11 somehost kernel: [ 1447.255115] i40e 0000:02:00.0:
> enabling bridge mode: VEPA
> Jul 24 12:02:11 somehost kernel: [ 1447.267922] i40e 0000:02:00.0 eth0:
> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>
> and:
> Jul 24 12:16:08 somehost kernel: [ 2285.524925] i40e 0000:02:00.0: FD
> filter space full, new ntuple rules will not be added Jul 24 12:16:09
> somehost kernel: [ 2286.348784] i40e 0000:02:00.0: FD Filter table flushed
> and FD-SB replayed.
> Jul 24 12:16:09 somehost kernel: [ 2286.356063] i40e 0000:02:00.0: FD
> Sideband/ntuple is being enabled since we have space in the table now Jul
> 24 12:16:09 somehost kernel: [ 2286.365777] i40e 0000:02:00.0: ATR is
> being enabled since we have space in the table now
>
> Then I read something about updating the NVM/preboot (here on the ML)
> which I did then. After having some issues with flashing (the update
> utility doesn't like CONFIG_STRICT_DEVMEM=y, there's also no warning about
> it. disabling it did help but not entirely) I decided to flash from a
> Windows host (I had to setup one...) as it seemed somewhat easier and
> safer, for now.
> The preboot util still complained about having an older NVM than expected
> but somehow it worked and it's a more recent version now than it was
> before. So here is the initialization of the 20.2 version/revision and
> also using the most recent 1.2.48 driver on a
> 3.18.17 Kernel:
>
> Jul 24 11:38:13 somehost kernel: [ 2.251951] i40e: Intel(R) Ethernet
> Connection XL710 Network Driver - version 1.2.48
> Jul 24 11:38:13 somehost kernel: [ 2.259620] i40e: Copyright (c) 2013
> - 2015 Intel Corporation.
> Jul 24 11:38:13 somehost kernel: [ 2.283072] i40e 0000:02:00.0:
> f4.33.31377 a1.2 n4.42 e191b
> Jul 24 11:38:13 somehost kernel: [ 2.528098] i40e 0000:02:00.0: FCoE
> capability is disabled
> Jul 24 11:38:13 somehost kernel: [ 2.541226] i40e 0000:02:00.0: MAC
> address: 68:05:ca:33:17:50
> Jul 24 11:38:13 somehost kernel: [ 2.545296] i40e 0000:02:00.0: SAN
> MAC: 68:05:ca:33:17:52
> Jul 24 11:38:13 somehost kernel: [ 2.559708] i40e 0000:02:00.0: fcoe
> queues = 0
> Jul 24 11:38:13 somehost kernel: [ 2.588853] i40e 0000:02:00.0:
> enabling bridge mode: VEPA
> Jul 24 11:38:13 somehost kernel: [ 2.623476] i40e 0000:02:00.0: PHC
> enabled
> Jul 24 11:38:13 somehost kernel: [ 2.639801] i40e 0000:02:00.0:
> PCI-Express: Speed 8.0GT/s Width x8
> Jul 24 11:38:13 somehost kernel: [ 2.653156] i40e 0000:02:00.0:
> Features: PF-id[0] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE
> DCB PTP
> Jul 24 11:38:13 somehost kernel: [ 2.672182] i40e 0000:02:00.1:
> f4.33.31377 a1.2 n4.42 e191b
> Jul 24 11:38:13 somehost kernel: [ 2.921075] i40e 0000:02:00.1: FCoE
> capability is disabled
> Jul 24 11:38:13 somehost kernel: [ 2.935064] i40e 0000:02:00.1: MAC
> address: 68:05:ca:33:17:51
> Jul 24 11:38:13 somehost kernel: [ 2.944833] i40e 0000:02:00.1: SAN
> MAC: 68:05:ca:33:17:53
> Jul 24 11:38:13 somehost kernel: [ 2.971041] i40e 0000:02:00.1: fcoe
> queues = 0
> Jul 24 11:38:13 somehost kernel: [ 3.004728] i40e 0000:02:00.1:
> enabling bridge mode: VEPA
> Jul 24 11:38:13 somehost kernel: [ 3.290178] i40e 0000:02:00.1: PHC
> enabled
> Jul 24 11:38:13 somehost kernel: [ 3.310646] i40e 0000:02:00.1:
> PCI-Express: Speed 8.0GT/s Width x8
> Jul 24 11:38:13 somehost kernel: [ 3.331079] i40e 0000:02:00.1:
> Features: PF-id[1] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE
> DCB PTP
> Jul 24 11:38:13 somehost kernel: [ 4.279754] i40e 0000:02:00.1
> rename5: renamed from eth3
> Jul 24 11:38:13 somehost kernel: [ 4.315533] i40e 0000:02:00.0 eth0:
> renamed from eth1
> Jul 24 11:38:13 somehost kernel: [ 4.387610] i40e 0000:02:00.1 eth1:
> renamed from rename5
> Jul 24 11:38:13 somehost kernel: [ 6.276102] i40e 0000:02:00.0 eth0:
> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
> Jul 24 11:38:14 somehost kernel: [ 8.396154] i40e 0000:02:00.1 eth1:
> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>
> The above mentioned issues are still persistent even though less frequent
> and it's running about 3 days now without flapping that much that the VRRP
> switches to a different host. I'm not happy yet as it's still flapping and
> complaining about ntuple/ATR and such. Can I somehow help (by providing
> the necessary details) to get those issues fixed?
>
> # ethtool -i eth0
> driver: i40e
> version: 1.2.48
> firmware-version: f4.33.31377 a1.2 n4.42 e191b
> bus-info: 0000:02:00.0
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: yes
> supports-register-dump: yes
> supports-priv-flags: yes
>
> # ethtool -k eth0
> Features for eth0:
> rx-checksumming: on
> tx-checksumming: on
> tx-checksum-ipv4: on
> tx-checksum-ip-generic: off [fixed]
> tx-checksum-ipv6: on
> tx-checksum-fcoe-crc: off [fixed]
> tx-checksum-sctp: on
> scatter-gather: on
> tx-scatter-gather: on
> tx-scatter-gather-fraglist: off [fixed]
> tcp-segmentation-offload: on
> tx-tcp-segmentation: on
> tx-tcp-ecn-segmentation: on
> tx-tcp6-segmentation: on
> udp-fragmentation-offload: off [fixed]
> generic-segmentation-offload: on
> generic-receive-offload: on
> large-receive-offload: off [fixed]
> rx-vlan-offload: on
> tx-vlan-offload: on
> ntuple-filters: on
> receive-hashing: on
> highdma: on
> rx-vlan-filter: on
> vlan-challenged: off [fixed]
> tx-lockless: off [fixed]
> netns-local: off [fixed]
> tx-gso-robust: off [fixed]
> tx-fcoe-segmentation: off [fixed]
> tx-gre-segmentation: off [fixed]
> tx-ipip-segmentation: off [fixed]
> tx-sit-segmentation: off [fixed]
> tx-udp_tnl-segmentation: on
> tx-mpls-segmentation: off [fixed]
> fcoe-mtu: off [fixed]
> tx-nocache-copy: off
> loopback: off [fixed]
> rx-fcs: off [fixed]
> rx-all: off [fixed]
> tx-vlan-stag-hw-insert: off [fixed]
> rx-vlan-stag-hw-parse: off [fixed]
> rx-vlan-stag-filter: off [fixed]
> l2-fwd-offload: off [fixed]
> busy-poll: off [fixed]
>
> # lspci -nvv
> 02:00.1 0200: 8086:1572 (rev 01)
> Subsystem: 8086:0000
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at c2e000000 (64-bit, prefetchable) [size=8M]
> Region 3: Memory at c2f800000 (64-bit, prefetchable) [size=32K]
> Expansion ROM at dfa00000 [disabled] [size=512K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [70] MSI-X: Enable+ Count=129 Masked-
> Vector table: BAR=3 offset=00000000
> PBA: BAR=3 offset=00001000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s
> <512ns, L1
> <64us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend+
> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Latency
> L0 <2us, L1
> <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive-
> BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> Capabilities: [e0] Vital Product Data
> Product Name: XL710 40GbE Controller
> Read-only fields:
> [PN] Part number:
> [EC] Engineering changes:
> [FG] Unknown:
> [LC] Unknown:
> [MN] Manufacture ID:
> [PG] Unknown:
> [SN] Serial number:
> [V0] Vendor specific:
> [RV] Reserved: checksum good, 0 byte(s) reserved
> Read/write fields:
> [V1] Vendor specific:
> End
> Capabilities: [100 v2] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+
> MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
> ChkEn-
> Capabilities: [140 v1] Device Serial Number 50-17-33-ff-ff-ca-05-68
> Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 0
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
> IOVSta: Migration-
> Initial VFs: 64, Total VFs: 64, Number of VFs: 0, Function
> Dependency
> Link: 01
> VF offset: 335, stride: 1, Device ID: 154c
> Supported Page Size: 00000553, System Page Size: 00000001
> Region 0: Memory at 0000000c2f000000 (64-bit, prefetchable)
> Region 3: Memory at 0000000c2f810000 (64-bit, prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Capabilities: [1a0 v1] Transaction Processing Hints
> Device specific mode supported
> No steering table available
> Capabilities: [1b0 v1] Access Control Services
> ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir-
> UpstreamFwd-
> EgressCtrl- DirectTrans-
> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir-
> UpstreamFwd-
> EgressCtrl- DirectTrans-
> Kernel driver in use: i40e
>
> --
> Regards,
> Christian Ruppert
>
> --------------------------------------------------------------------------
> ----
> _______________________________________________
> E1000-devel mailing list
> E1000-***@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/e1000-devel
> To learn more about Intel&#174; Ethernet, visit
> http://communities.intel.com/community/wired

------------------------------------------------------------------------------
Christian Ruppert
2015-07-27 16:20:16 UTC
Permalink
On 2015-07-27 18:02, Rose, Gregory V wrote:
> So to make sure I've got your report right... Since updating the FW
> the link flap issue occurs much less frequently and VRRP is not
> causing a switch to a different host but your log is getting spammed
> with ATR messages. Is that correct?

Exactly!

>
> Have you tried turning off ntuple-filters?

I'll try that.

>
> As for the link flap I don't think we've seen a lot of customers
> running the XL710 at 1Gbps speeds, most are using the 10Gbps or 40Gbps
> speeds. I'll do some research and see if there are any other reports
> of issues with the XL710 running at 1Gbps speed and get back to you.

Thanks!

>
> - Greg
>
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Monday, July 27, 2015 8:47 AM
>> To: e1000-***@lists.sf.net
>> Subject: [E1000-devel] X710 / i40e interface resets
>>
>> Hi List,
>>
>> after having some serious issues with the X520 ones I wanted to give
>> the
>> X710 a try. At first I had some trouble again. Started to flap
>> sometimes
>> and later flapping until VRRP switched to a different host. The Kernel
>> log
>> was spammed with:
>> Jul 24 12:02:10 somehost kernel: [ 1446.325468] i40e 0000:02:00.0: TX
>> driver issue detected, PF reset issued Jul 24 12:02:11 somehost
>> kernel: [
>> 1447.154720] i40e 0000:02:00.0: FCoE capability is disabled Jul 24
>> 12:02:11 somehost kernel: [ 1447.196823] i40e 0000:02:00.0: PHC
>> enabled
>> Jul 24 12:02:11 somehost kernel: [ 1447.255115] i40e 0000:02:00.0:
>> enabling bridge mode: VEPA
>> Jul 24 12:02:11 somehost kernel: [ 1447.267922] i40e 0000:02:00.0
>> eth0:
>> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>>
>> and:
>> Jul 24 12:16:08 somehost kernel: [ 2285.524925] i40e 0000:02:00.0: FD
>> filter space full, new ntuple rules will not be added Jul 24 12:16:09
>> somehost kernel: [ 2286.348784] i40e 0000:02:00.0: FD Filter table
>> flushed
>> and FD-SB replayed.
>> Jul 24 12:16:09 somehost kernel: [ 2286.356063] i40e 0000:02:00.0: FD
>> Sideband/ntuple is being enabled since we have space in the table now
>> Jul
>> 24 12:16:09 somehost kernel: [ 2286.365777] i40e 0000:02:00.0: ATR is
>> being enabled since we have space in the table now
>>
>> Then I read something about updating the NVM/preboot (here on the ML)
>> which I did then. After having some issues with flashing (the update
>> utility doesn't like CONFIG_STRICT_DEVMEM=y, there's also no warning
>> about
>> it. disabling it did help but not entirely) I decided to flash from a
>> Windows host (I had to setup one...) as it seemed somewhat easier and
>> safer, for now.
>> The preboot util still complained about having an older NVM than
>> expected
>> but somehow it worked and it's a more recent version now than it was
>> before. So here is the initialization of the 20.2 version/revision and
>> also using the most recent 1.2.48 driver on a
>> 3.18.17 Kernel:
>>
>> Jul 24 11:38:13 somehost kernel: [ 2.251951] i40e: Intel(R)
>> Ethernet
>> Connection XL710 Network Driver - version 1.2.48
>> Jul 24 11:38:13 somehost kernel: [ 2.259620] i40e: Copyright (c)
>> 2013
>> - 2015 Intel Corporation.
>> Jul 24 11:38:13 somehost kernel: [ 2.283072] i40e 0000:02:00.0:
>> f4.33.31377 a1.2 n4.42 e191b
>> Jul 24 11:38:13 somehost kernel: [ 2.528098] i40e 0000:02:00.0:
>> FCoE
>> capability is disabled
>> Jul 24 11:38:13 somehost kernel: [ 2.541226] i40e 0000:02:00.0: MAC
>> address: 68:05:ca:33:17:50
>> Jul 24 11:38:13 somehost kernel: [ 2.545296] i40e 0000:02:00.0: SAN
>> MAC: 68:05:ca:33:17:52
>> Jul 24 11:38:13 somehost kernel: [ 2.559708] i40e 0000:02:00.0:
>> fcoe
>> queues = 0
>> Jul 24 11:38:13 somehost kernel: [ 2.588853] i40e 0000:02:00.0:
>> enabling bridge mode: VEPA
>> Jul 24 11:38:13 somehost kernel: [ 2.623476] i40e 0000:02:00.0: PHC
>> enabled
>> Jul 24 11:38:13 somehost kernel: [ 2.639801] i40e 0000:02:00.0:
>> PCI-Express: Speed 8.0GT/s Width x8
>> Jul 24 11:38:13 somehost kernel: [ 2.653156] i40e 0000:02:00.0:
>> Features: PF-id[0] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB
>> NTUPLE
>> DCB PTP
>> Jul 24 11:38:13 somehost kernel: [ 2.672182] i40e 0000:02:00.1:
>> f4.33.31377 a1.2 n4.42 e191b
>> Jul 24 11:38:13 somehost kernel: [ 2.921075] i40e 0000:02:00.1:
>> FCoE
>> capability is disabled
>> Jul 24 11:38:13 somehost kernel: [ 2.935064] i40e 0000:02:00.1: MAC
>> address: 68:05:ca:33:17:51
>> Jul 24 11:38:13 somehost kernel: [ 2.944833] i40e 0000:02:00.1: SAN
>> MAC: 68:05:ca:33:17:53
>> Jul 24 11:38:13 somehost kernel: [ 2.971041] i40e 0000:02:00.1:
>> fcoe
>> queues = 0
>> Jul 24 11:38:13 somehost kernel: [ 3.004728] i40e 0000:02:00.1:
>> enabling bridge mode: VEPA
>> Jul 24 11:38:13 somehost kernel: [ 3.290178] i40e 0000:02:00.1: PHC
>> enabled
>> Jul 24 11:38:13 somehost kernel: [ 3.310646] i40e 0000:02:00.1:
>> PCI-Express: Speed 8.0GT/s Width x8
>> Jul 24 11:38:13 somehost kernel: [ 3.331079] i40e 0000:02:00.1:
>> Features: PF-id[1] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB
>> NTUPLE
>> DCB PTP
>> Jul 24 11:38:13 somehost kernel: [ 4.279754] i40e 0000:02:00.1
>> rename5: renamed from eth3
>> Jul 24 11:38:13 somehost kernel: [ 4.315533] i40e 0000:02:00.0
>> eth0:
>> renamed from eth1
>> Jul 24 11:38:13 somehost kernel: [ 4.387610] i40e 0000:02:00.1
>> eth1:
>> renamed from rename5
>> Jul 24 11:38:13 somehost kernel: [ 6.276102] i40e 0000:02:00.0
>> eth0:
>> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>> Jul 24 11:38:14 somehost kernel: [ 8.396154] i40e 0000:02:00.1
>> eth1:
>> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>>
>> The above mentioned issues are still persistent even though less
>> frequent
>> and it's running about 3 days now without flapping that much that the
>> VRRP
>> switches to a different host. I'm not happy yet as it's still flapping
>> and
>> complaining about ntuple/ATR and such. Can I somehow help (by
>> providing
>> the necessary details) to get those issues fixed?
>>
>> # ethtool -i eth0
>> driver: i40e
>> version: 1.2.48
>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>> bus-info: 0000:02:00.0
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: yes
>> supports-register-dump: yes
>> supports-priv-flags: yes
>>
>> # ethtool -k eth0
>> Features for eth0:
>> rx-checksumming: on
>> tx-checksumming: on
>> tx-checksum-ipv4: on
>> tx-checksum-ip-generic: off [fixed]
>> tx-checksum-ipv6: on
>> tx-checksum-fcoe-crc: off [fixed]
>> tx-checksum-sctp: on
>> scatter-gather: on
>> tx-scatter-gather: on
>> tx-scatter-gather-fraglist: off [fixed]
>> tcp-segmentation-offload: on
>> tx-tcp-segmentation: on
>> tx-tcp-ecn-segmentation: on
>> tx-tcp6-segmentation: on
>> udp-fragmentation-offload: off [fixed]
>> generic-segmentation-offload: on
>> generic-receive-offload: on
>> large-receive-offload: off [fixed]
>> rx-vlan-offload: on
>> tx-vlan-offload: on
>> ntuple-filters: on
>> receive-hashing: on
>> highdma: on
>> rx-vlan-filter: on
>> vlan-challenged: off [fixed]
>> tx-lockless: off [fixed]
>> netns-local: off [fixed]
>> tx-gso-robust: off [fixed]
>> tx-fcoe-segmentation: off [fixed]
>> tx-gre-segmentation: off [fixed]
>> tx-ipip-segmentation: off [fixed]
>> tx-sit-segmentation: off [fixed]
>> tx-udp_tnl-segmentation: on
>> tx-mpls-segmentation: off [fixed]
>> fcoe-mtu: off [fixed]
>> tx-nocache-copy: off
>> loopback: off [fixed]
>> rx-fcs: off [fixed]
>> rx-all: off [fixed]
>> tx-vlan-stag-hw-insert: off [fixed]
>> rx-vlan-stag-hw-parse: off [fixed]
>> rx-vlan-stag-filter: off [fixed]
>> l2-fwd-offload: off [fixed]
>> busy-poll: off [fixed]
>>
>> # lspci -nvv
>> 02:00.1 0200: 8086:1572 (rev 01)
>> Subsystem: 8086:0000
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
>> Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort-
>> <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 17
>> Region 0: Memory at c2e000000 (64-bit, prefetchable) [size=8M]
>> Region 3: Memory at c2f800000 (64-bit, prefetchable) [size=32K]
>> Expansion ROM at dfa00000 [disabled] [size=512K]
>> Capabilities: [40] Power Management version 3
>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
>> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>> Address: 0000000000000000 Data: 0000
>> Masking: 00000000 Pending: 00000000
>> Capabilities: [70] MSI-X: Enable+ Count=129 Masked-
>> Vector table: BAR=3 offset=00000000
>> PBA: BAR=3 offset=00001000
>> Capabilities: [a0] Express (v2) Endpoint, MSI 00
>> DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s
>> <512ns, L1
>> <64us
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
>> Unsupported+
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
>> TransPend+
>> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Latency
>> L0 <2us, L1
>> <16us
>> ClockPM- Surprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>> CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+
>> DLActive-
>> BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
>> SpeedDis-, Selectable De-emphasis: -6dB
>> Transmit Margin: Normal Operating Range,
>> EnterModifiedCompliance-
>> ComplianceSOS-
>> Compliance De-emphasis: -6dB
>> LnkSta2: Current De-emphasis Level: -6dB,
>> EqualizationComplete-,
>> EqualizationPhase1-
>> EqualizationPhase2-, EqualizationPhase3-,
>> LinkEqualizationRequest-
>> Capabilities: [e0] Vital Product Data
>> Product Name: XL710 40GbE Controller
>> Read-only fields:
>> [PN] Part number:
>> [EC] Engineering changes:
>> [FG] Unknown:
>> [LC] Unknown:
>> [MN] Manufacture ID:
>> [PG] Unknown:
>> [SN] Serial number:
>> [V0] Vendor specific:
>> [RV] Reserved: checksum good, 0 byte(s) reserved
>> Read/write fields:
>> [V1] Vendor specific:
>> End
>> Capabilities: [100 v2] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
>> RxOF-
>> MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
>> RxOF-
>> MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
>> RxOF+
>> MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> NonFatalErr+
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> NonFatalErr+
>> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
>> ChkEn-
>> Capabilities: [140 v1] Device Serial Number 50-17-33-ff-ff-ca-05-68
>> Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
>> ARICap: MFVC- ACS-, Next Function: 0
>> ARICtl: MFVC- ACS-, Function Group: 0
>> Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
>> IOVCap: Migration-, Interrupt Message Number: 000
>> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
>> IOVSta: Migration-
>> Initial VFs: 64, Total VFs: 64, Number of VFs: 0, Function
>> Dependency
>> Link: 01
>> VF offset: 335, stride: 1, Device ID: 154c
>> Supported Page Size: 00000553, System Page Size: 00000001
>> Region 0: Memory at 0000000c2f000000 (64-bit, prefetchable)
>> Region 3: Memory at 0000000c2f810000 (64-bit, prefetchable)
>> VF Migration: offset: 00000000, BIR: 0
>> Capabilities: [1a0 v1] Transaction Processing Hints
>> Device specific mode supported
>> No steering table available
>> Capabilities: [1b0 v1] Access Control Services
>> ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir-
>> UpstreamFwd-
>> EgressCtrl- DirectTrans-
>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir-
>> UpstreamFwd-
>> EgressCtrl- DirectTrans-
>> Kernel driver in use: i40e
>>
>> --
>> Regards,
>> Christian Ruppert
>>
>> --------------------------------------------------------------------------
>> ----
>> _______________________________________________
>> E1000-devel mailing list
>> E1000-***@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/e1000-devel
>> To learn more about Intel&#174; Ethernet, visit
>> http://communities.intel.com/community/wired

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Christian Ruppert
2015-07-28 12:42:49 UTC
Permalink
Greg,

On 2015-07-27 18:20, Christian Ruppert wrote:
> On 2015-07-27 18:02, Rose, Gregory V wrote:
>> So to make sure I've got your report right... Since updating the FW
>> the link flap issue occurs much less frequently and VRRP is not
>> causing a switch to a different host but your log is getting spammed
>> with ATR messages. Is that correct?
>
> Exactly!
>
>>
>> Have you tried turning off ntuple-filters?
>
> I'll try that.

No more:
[341397.489477] i40e 0000:02:00.0: FD filter space full, new ntuple
rules will not be added
[341398.041918] i40e 0000:02:00.0: FD Filter table flushed and FD-SB
replayed.
[341398.049403] i40e 0000:02:00.0: FD Sideband/ntuple is being enabled
since we have space in the table now
[341398.059858] i40e 0000:02:00.0: ATR is being enabled since we have
space in the table now
[341850.732707] i40e 0000:02:00.0: ATR re-enabled.

since I disabled ntuple. So that is gone (not fixed though) for now.

The flaps are still persistent:
[354195.790717] i40e 0000:02:00.0: TX driver issue detected, PF reset
issued
[354196.551366] i40e 0000:02:00.0: FCoE capability is disabled
[354196.593458] i40e 0000:02:00.0: PHC enabled
[354196.653574] i40e 0000:02:00.0: enabling bridge mode: VEPA
[354196.672095] i40e 0000:02:00.0 eth0: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: None

>
>>
>> As for the link flap I don't think we've seen a lot of customers
>> running the XL710 at 1Gbps speeds, most are using the 10Gbps or 40Gbps
>> speeds. I'll do some research and see if there are any other reports
>> of issues with the XL710 running at 1Gbps speed and get back to you.
>
> Thanks!
>
>>
>> - Greg
>>
>>> -----Original Message-----
>>> From: Christian Ruppert [mailto:***@qasl.de]
>>> Sent: Monday, July 27, 2015 8:47 AM
>>> To: e1000-***@lists.sf.net
>>> Subject: [E1000-devel] X710 / i40e interface resets
>>>
>>> Hi List,
>>>
>>> after having some serious issues with the X520 ones I wanted to give
>>> the
>>> X710 a try. At first I had some trouble again. Started to flap
>>> sometimes
>>> and later flapping until VRRP switched to a different host. The
>>> Kernel log
>>> was spammed with:
>>> Jul 24 12:02:10 somehost kernel: [ 1446.325468] i40e 0000:02:00.0: TX
>>> driver issue detected, PF reset issued Jul 24 12:02:11 somehost
>>> kernel: [
>>> 1447.154720] i40e 0000:02:00.0: FCoE capability is disabled Jul 24
>>> 12:02:11 somehost kernel: [ 1447.196823] i40e 0000:02:00.0: PHC
>>> enabled
>>> Jul 24 12:02:11 somehost kernel: [ 1447.255115] i40e 0000:02:00.0:
>>> enabling bridge mode: VEPA
>>> Jul 24 12:02:11 somehost kernel: [ 1447.267922] i40e 0000:02:00.0
>>> eth0:
>>> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>>>
>>> and:
>>> Jul 24 12:16:08 somehost kernel: [ 2285.524925] i40e 0000:02:00.0: FD
>>> filter space full, new ntuple rules will not be added Jul 24 12:16:09
>>> somehost kernel: [ 2286.348784] i40e 0000:02:00.0: FD Filter table
>>> flushed
>>> and FD-SB replayed.
>>> Jul 24 12:16:09 somehost kernel: [ 2286.356063] i40e 0000:02:00.0: FD
>>> Sideband/ntuple is being enabled since we have space in the table now
>>> Jul
>>> 24 12:16:09 somehost kernel: [ 2286.365777] i40e 0000:02:00.0: ATR is
>>> being enabled since we have space in the table now
>>>
>>> Then I read something about updating the NVM/preboot (here on the ML)
>>> which I did then. After having some issues with flashing (the update
>>> utility doesn't like CONFIG_STRICT_DEVMEM=y, there's also no warning
>>> about
>>> it. disabling it did help but not entirely) I decided to flash from a
>>> Windows host (I had to setup one...) as it seemed somewhat easier and
>>> safer, for now.
>>> The preboot util still complained about having an older NVM than
>>> expected
>>> but somehow it worked and it's a more recent version now than it was
>>> before. So here is the initialization of the 20.2 version/revision
>>> and
>>> also using the most recent 1.2.48 driver on a
>>> 3.18.17 Kernel:
>>>
>>> Jul 24 11:38:13 somehost kernel: [ 2.251951] i40e: Intel(R)
>>> Ethernet
>>> Connection XL710 Network Driver - version 1.2.48
>>> Jul 24 11:38:13 somehost kernel: [ 2.259620] i40e: Copyright (c)
>>> 2013
>>> - 2015 Intel Corporation.
>>> Jul 24 11:38:13 somehost kernel: [ 2.283072] i40e 0000:02:00.0:
>>> f4.33.31377 a1.2 n4.42 e191b
>>> Jul 24 11:38:13 somehost kernel: [ 2.528098] i40e 0000:02:00.0:
>>> FCoE
>>> capability is disabled
>>> Jul 24 11:38:13 somehost kernel: [ 2.541226] i40e 0000:02:00.0:
>>> MAC
>>> address: 68:05:ca:33:17:50
>>> Jul 24 11:38:13 somehost kernel: [ 2.545296] i40e 0000:02:00.0:
>>> SAN
>>> MAC: 68:05:ca:33:17:52
>>> Jul 24 11:38:13 somehost kernel: [ 2.559708] i40e 0000:02:00.0:
>>> fcoe
>>> queues = 0
>>> Jul 24 11:38:13 somehost kernel: [ 2.588853] i40e 0000:02:00.0:
>>> enabling bridge mode: VEPA
>>> Jul 24 11:38:13 somehost kernel: [ 2.623476] i40e 0000:02:00.0:
>>> PHC
>>> enabled
>>> Jul 24 11:38:13 somehost kernel: [ 2.639801] i40e 0000:02:00.0:
>>> PCI-Express: Speed 8.0GT/s Width x8
>>> Jul 24 11:38:13 somehost kernel: [ 2.653156] i40e 0000:02:00.0:
>>> Features: PF-id[0] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB
>>> NTUPLE
>>> DCB PTP
>>> Jul 24 11:38:13 somehost kernel: [ 2.672182] i40e 0000:02:00.1:
>>> f4.33.31377 a1.2 n4.42 e191b
>>> Jul 24 11:38:13 somehost kernel: [ 2.921075] i40e 0000:02:00.1:
>>> FCoE
>>> capability is disabled
>>> Jul 24 11:38:13 somehost kernel: [ 2.935064] i40e 0000:02:00.1:
>>> MAC
>>> address: 68:05:ca:33:17:51
>>> Jul 24 11:38:13 somehost kernel: [ 2.944833] i40e 0000:02:00.1:
>>> SAN
>>> MAC: 68:05:ca:33:17:53
>>> Jul 24 11:38:13 somehost kernel: [ 2.971041] i40e 0000:02:00.1:
>>> fcoe
>>> queues = 0
>>> Jul 24 11:38:13 somehost kernel: [ 3.004728] i40e 0000:02:00.1:
>>> enabling bridge mode: VEPA
>>> Jul 24 11:38:13 somehost kernel: [ 3.290178] i40e 0000:02:00.1:
>>> PHC
>>> enabled
>>> Jul 24 11:38:13 somehost kernel: [ 3.310646] i40e 0000:02:00.1:
>>> PCI-Express: Speed 8.0GT/s Width x8
>>> Jul 24 11:38:13 somehost kernel: [ 3.331079] i40e 0000:02:00.1:
>>> Features: PF-id[1] VFs: 64 VSIs: 66 QP: 8 RX: 1BUF RSS FD_ATR FD_SB
>>> NTUPLE
>>> DCB PTP
>>> Jul 24 11:38:13 somehost kernel: [ 4.279754] i40e 0000:02:00.1
>>> rename5: renamed from eth3
>>> Jul 24 11:38:13 somehost kernel: [ 4.315533] i40e 0000:02:00.0
>>> eth0:
>>> renamed from eth1
>>> Jul 24 11:38:13 somehost kernel: [ 4.387610] i40e 0000:02:00.1
>>> eth1:
>>> renamed from rename5
>>> Jul 24 11:38:13 somehost kernel: [ 6.276102] i40e 0000:02:00.0
>>> eth0:
>>> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>>> Jul 24 11:38:14 somehost kernel: [ 8.396154] i40e 0000:02:00.1
>>> eth1:
>>> NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>>>
>>> The above mentioned issues are still persistent even though less
>>> frequent
>>> and it's running about 3 days now without flapping that much that the
>>> VRRP
>>> switches to a different host. I'm not happy yet as it's still
>>> flapping and
>>> complaining about ntuple/ATR and such. Can I somehow help (by
>>> providing
>>> the necessary details) to get those issues fixed?
>>>
>>> # ethtool -i eth0
>>> driver: i40e
>>> version: 1.2.48
>>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>>> bus-info: 0000:02:00.0
>>> supports-statistics: yes
>>> supports-test: yes
>>> supports-eeprom-access: yes
>>> supports-register-dump: yes
>>> supports-priv-flags: yes
>>>
>>> # ethtool -k eth0
>>> Features for eth0:
>>> rx-checksumming: on
>>> tx-checksumming: on
>>> tx-checksum-ipv4: on
>>> tx-checksum-ip-generic: off [fixed]
>>> tx-checksum-ipv6: on
>>> tx-checksum-fcoe-crc: off [fixed]
>>> tx-checksum-sctp: on
>>> scatter-gather: on
>>> tx-scatter-gather: on
>>> tx-scatter-gather-fraglist: off [fixed]
>>> tcp-segmentation-offload: on
>>> tx-tcp-segmentation: on
>>> tx-tcp-ecn-segmentation: on
>>> tx-tcp6-segmentation: on
>>> udp-fragmentation-offload: off [fixed]
>>> generic-segmentation-offload: on
>>> generic-receive-offload: on
>>> large-receive-offload: off [fixed]
>>> rx-vlan-offload: on
>>> tx-vlan-offload: on
>>> ntuple-filters: on
>>> receive-hashing: on
>>> highdma: on
>>> rx-vlan-filter: on
>>> vlan-challenged: off [fixed]
>>> tx-lockless: off [fixed]
>>> netns-local: off [fixed]
>>> tx-gso-robust: off [fixed]
>>> tx-fcoe-segmentation: off [fixed]
>>> tx-gre-segmentation: off [fixed]
>>> tx-ipip-segmentation: off [fixed]
>>> tx-sit-segmentation: off [fixed]
>>> tx-udp_tnl-segmentation: on
>>> tx-mpls-segmentation: off [fixed]
>>> fcoe-mtu: off [fixed]
>>> tx-nocache-copy: off
>>> loopback: off [fixed]
>>> rx-fcs: off [fixed]
>>> rx-all: off [fixed]
>>> tx-vlan-stag-hw-insert: off [fixed]
>>> rx-vlan-stag-hw-parse: off [fixed]
>>> rx-vlan-stag-filter: off [fixed]
>>> l2-fwd-offload: off [fixed]
>>> busy-poll: off [fixed]
>>>
>>> # lspci -nvv
>>> 02:00.1 0200: 8086:1572 (rev 01)
>>> Subsystem: 8086:0000
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
>>> Stepping- SERR+ FastB2B- DisINTx+
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>> <TAbort-
>>> <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0, Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 17
>>> Region 0: Memory at c2e000000 (64-bit, prefetchable) [size=8M]
>>> Region 3: Memory at c2f800000 (64-bit, prefetchable) [size=32K]
>>> Expansion ROM at dfa00000 [disabled] [size=512K]
>>> Capabilities: [40] Power Management version 3
>>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
>>> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>>> Address: 0000000000000000 Data: 0000
>>> Masking: 00000000 Pending: 00000000
>>> Capabilities: [70] MSI-X: Enable+ Count=129 Masked-
>>> Vector table: BAR=3 offset=00000000
>>> PBA: BAR=3 offset=00001000
>>> Capabilities: [a0] Express (v2) Endpoint, MSI 00
>>> DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s
>>> <512ns, L1
>>> <64us
>>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>>> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
>>> Unsupported+
>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
>>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>>> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
>>> TransPend+
>>> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Latency
>>> L0 <2us, L1
>>> <16us
>>> ClockPM- Surprise- LLActRep- BwNot-
>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>>> CommClk+
>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>> LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+
>>> DLActive-
>>> BWMgmt- ABWMgmt-
>>> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
>>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>>> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
>>> SpeedDis-, Selectable De-emphasis: -6dB
>>> Transmit Margin: Normal Operating Range,
>>> EnterModifiedCompliance-
>>> ComplianceSOS-
>>> Compliance De-emphasis: -6dB
>>> LnkSta2: Current De-emphasis Level: -6dB,
>>> EqualizationComplete-,
>>> EqualizationPhase1-
>>> EqualizationPhase2-, EqualizationPhase3-,
>>> LinkEqualizationRequest-
>>> Capabilities: [e0] Vital Product Data
>>> Product Name: XL710 40GbE Controller
>>> Read-only fields:
>>> [PN] Part number:
>>> [EC] Engineering changes:
>>> [FG] Unknown:
>>> [LC] Unknown:
>>> [MN] Manufacture ID:
>>> [PG] Unknown:
>>> [SN] Serial number:
>>> [V0] Vendor specific:
>>> [RV] Reserved: checksum good, 0 byte(s) reserved
>>> Read/write fields:
>>> [V1] Vendor specific:
>>> End
>>> Capabilities: [100 v2] Advanced Error Reporting
>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
>>> RxOF-
>>> MalfTLP- ECRC- UnsupReq- ACSViol-
>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
>>> RxOF-
>>> MalfTLP- ECRC- UnsupReq- ACSViol-
>>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
>>> RxOF+
>>> MalfTLP+ ECRC- UnsupReq- ACSViol-
>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>>> NonFatalErr+
>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>>> NonFatalErr+
>>> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
>>> ChkEn-
>>> Capabilities: [140 v1] Device Serial Number 50-17-33-ff-ff-ca-05-68
>>> Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
>>> ARICap: MFVC- ACS-, Next Function: 0
>>> ARICtl: MFVC- ACS-, Function Group: 0
>>> Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
>>> IOVCap: Migration-, Interrupt Message Number: 000
>>> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
>>> IOVSta: Migration-
>>> Initial VFs: 64, Total VFs: 64, Number of VFs: 0, Function
>>> Dependency
>>> Link: 01
>>> VF offset: 335, stride: 1, Device ID: 154c
>>> Supported Page Size: 00000553, System Page Size: 00000001
>>> Region 0: Memory at 0000000c2f000000 (64-bit, prefetchable)
>>> Region 3: Memory at 0000000c2f810000 (64-bit, prefetchable)
>>> VF Migration: offset: 00000000, BIR: 0
>>> Capabilities: [1a0 v1] Transaction Processing Hints
>>> Device specific mode supported
>>> No steering table available
>>> Capabilities: [1b0 v1] Access Control Services
>>> ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir-
>>> UpstreamFwd-
>>> EgressCtrl- DirectTrans-
>>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir-
>>> UpstreamFwd-
>>> EgressCtrl- DirectTrans-
>>> Kernel driver in use: i40e
>>>
>>> --
>>> Regards,
>>> Christian Ruppert
>>>
>>> --------------------------------------------------------------------------
>>> ----
>>> _______________________________________________
>>> E1000-devel mailing list
>>> E1000-***@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/e1000-devel
>>> To learn more about Intel&#174; Ethernet, visit
>>> http://communities.intel.com/community/wired

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Rose, Gregory V
2015-07-28 16:51:13 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Tuesday, July 28, 2015 5:43 AM
> To: Rose, Gregory V
> Cc: e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>
> Greg,
>
> On 2015-07-27 18:20, Christian Ruppert wrote:
> > On 2015-07-27 18:02, Rose, Gregory V wrote:
> >> So to make sure I've got your report right... Since updating the FW
> >> the link flap issue occurs much less frequently and VRRP is not
> >> causing a switch to a different host but your log is getting spammed
> >> with ATR messages. Is that correct?
> >
> > Exactly!
> >
> >>
> >> Have you tried turning off ntuple-filters?
> >
> > I'll try that.
>
> No more:
> [341397.489477] i40e 0000:02:00.0: FD filter space full, new ntuple rules
> will not be added [341398.041918] i40e 0000:02:00.0: FD Filter table
> flushed and FD-SB replayed.
> [341398.049403] i40e 0000:02:00.0: FD Sideband/ntuple is being enabled
> since we have space in the table now [341398.059858] i40e 0000:02:00.0:
> ATR is being enabled since we have space in the table now [341850.732707]
> i40e 0000:02:00.0: ATR re-enabled.
>
> since I disabled ntuple. So that is gone (not fixed though) for now.

OK - I think the messages you're seeing are part of normal operation but they are quite noisy. I know the i40e dev team is trying to reduce the amount of message "spam" to the system log so I'll point this out to them and perhaps something can be done to reduce the message volume.

>
> The flaps are still persistent:
> [354195.790717] i40e 0000:02:00.0: TX driver issue detected, PF reset
> issued [354196.551366] i40e 0000:02:00.0: FCoE capability is disabled
> [354196.593458] i40e 0000:02:00.0: PHC enabled [354196.653574] i40e
> 0000:02:00.0: enabling bridge mode: VEPA [354196.672095] i40e 0000:02:00.0
> eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

I've been told that the Tx driver issue detected message is due to a MDD (Malicious Driver Detection) event. We need to find out what is causing that so if you could please send me your system log and the output of ethtool <intf> and ethtool -i <intf> perhaps I can see what might be occurring. If not then we'll have to debug further.

I'll be out the next few days but returning Monday so I'll be able to follow up on this issue then.

Thanks,

- Greg


------------------------------------------------------------------------------
Christian Ruppert
2015-08-21 14:06:04 UTC
Permalink
On 2015-07-28 18:51, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Tuesday, July 28, 2015 5:43 AM
>> To: Rose, Gregory V
>> Cc: e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> Greg,
>>
>> On 2015-07-27 18:20, Christian Ruppert wrote:
>> > On 2015-07-27 18:02, Rose, Gregory V wrote:
>> >> So to make sure I've got your report right... Since updating the FW
>> >> the link flap issue occurs much less frequently and VRRP is not
>> >> causing a switch to a different host but your log is getting spammed
>> >> with ATR messages. Is that correct?
>> >
>> > Exactly!
>> >
>> >>
>> >> Have you tried turning off ntuple-filters?
>> >
>> > I'll try that.
>>
>> No more:
>> [341397.489477] i40e 0000:02:00.0: FD filter space full, new ntuple
>> rules
>> will not be added [341398.041918] i40e 0000:02:00.0: FD Filter table
>> flushed and FD-SB replayed.
>> [341398.049403] i40e 0000:02:00.0: FD Sideband/ntuple is being enabled
>> since we have space in the table now [341398.059858] i40e
>> 0000:02:00.0:
>> ATR is being enabled since we have space in the table now
>> [341850.732707]
>> i40e 0000:02:00.0: ATR re-enabled.
>>
>> since I disabled ntuple. So that is gone (not fixed though) for now.
>
> OK - I think the messages you're seeing are part of normal operation
> but they are quite noisy. I know the i40e dev team is trying to
> reduce the amount of message "spam" to the system log so I'll point
> this out to them and perhaps something can be done to reduce the
> message volume.
>
>>
>> The flaps are still persistent:
>> [354195.790717] i40e 0000:02:00.0: TX driver issue detected, PF reset
>> issued [354196.551366] i40e 0000:02:00.0: FCoE capability is disabled
>> [354196.593458] i40e 0000:02:00.0: PHC enabled [354196.653574] i40e
>> 0000:02:00.0: enabling bridge mode: VEPA [354196.672095] i40e
>> 0000:02:00.0
>> eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>
> I've been told that the Tx driver issue detected message is due to a
> MDD (Malicious Driver Detection) event. We need to find out what is
> causing that so if you could please send me your system log and the
> output of ethtool <intf> and ethtool -i <intf> perhaps I can see what
> might be occurring. If not then we'll have to debug further.

See the initial Mail for ethtool -k and so on. Also:
# ethtool eth0
Settings for eth0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Advertised link modes: 1000baseT/Full
10000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 10000Mb/s
Duplex: Full
Port: FIBRE
PHYAD: 0
Transceiver: external
Auto-negotiation: off
Supports Wake-on: d
Wake-on: d
Current message level: 0x0000000f (15)
drv probe link timer
Link detected: yes
# ethtool -i eth0
driver: i40e
version: 1.2.48
firmware-version: f4.33.31377 a1.2 n4.42 e191b
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes


>
> I'll be out the next few days but returning Monday so I'll be able to
> follow up on this issue then.
>
> Thanks,
>
> - Greg

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Rose, Gregory V
2015-08-25 23:19:12 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Friday, August 21, 2015 7:06 AM
> To: Rose, Gregory V
> Cc: e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>
> On 2015-07-28 18:51, Rose, Gregory V wrote:
> >> -----Original Message-----
> >> From: Christian Ruppert [mailto:***@qasl.de]
> >> Sent: Tuesday, July 28, 2015 5:43 AM
> >> To: Rose, Gregory V
> >> Cc: e1000-***@lists.sf.net
> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >>

[snip]

> > I've been told that the Tx driver issue detected message is due to a
> > MDD (Malicious Driver Detection) event. We need to find out what is
> > causing that so if you could please send me your system log and the
> > output of ethtool <intf> and ethtool -i <intf> perhaps I can see what
> > might be occurring. If not then we'll have to debug further.
>
> See the initial Mail for ethtool -k and so on. Also:
> # ethtool eth0
> Settings for eth0:
> Supported ports: [ FIBRE ]
> Supported link modes: 1000baseT/Full
> 10000baseT/Full
> Supported pause frame use: Symmetric
> Supports auto-negotiation: No
> Advertised link modes: 1000baseT/Full
> 10000baseT/Full
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Speed: 10000Mb/s
> Duplex: Full
> Port: FIBRE
> PHYAD: 0
> Transceiver: external
> Auto-negotiation: off
> Supports Wake-on: d
> Wake-on: d
> Current message level: 0x0000000f (15)
> drv probe link timer
> Link detected: yes
> # ethtool -i eth0
> driver: i40e
> version: 1.2.48
> firmware-version: f4.33.31377 a1.2 n4.42 e191b
> bus-info: 0000:02:00.0
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: yes
> supports-register-dump: yes
> supports-priv-flags: yes

I also need the output of 'dmesg' - and I need to figure out how to determine what specific MDD event is occurring. I'll get back to you with instructions on how to do that when I get the system log from you.

Thanks,

- Greg


------------------------------------------------------------------------------
Christian Ruppert
2015-08-26 17:24:21 UTC
Permalink
On 2015-08-26 01:19, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Friday, August 21, 2015 7:06 AM
>> To: Rose, Gregory V
>> Cc: e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>> >> -----Original Message-----
>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>> >> To: Rose, Gregory V
>> >> Cc: e1000-***@lists.sf.net
>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>
>
> [snip]
>
>> > I've been told that the Tx driver issue detected message is due to a
>> > MDD (Malicious Driver Detection) event. We need to find out what is
>> > causing that so if you could please send me your system log and the
>> > output of ethtool <intf> and ethtool -i <intf> perhaps I can see what
>> > might be occurring. If not then we'll have to debug further.
>>
>> See the initial Mail for ethtool -k and so on. Also:
>> # ethtool eth0
>> Settings for eth0:
>> Supported ports: [ FIBRE ]
>> Supported link modes: 1000baseT/Full
>> 10000baseT/Full
>> Supported pause frame use: Symmetric
>> Supports auto-negotiation: No
>> Advertised link modes: 1000baseT/Full
>> 10000baseT/Full
>> Advertised pause frame use: No
>> Advertised auto-negotiation: No
>> Speed: 10000Mb/s
>> Duplex: Full
>> Port: FIBRE
>> PHYAD: 0
>> Transceiver: external
>> Auto-negotiation: off
>> Supports Wake-on: d
>> Wake-on: d
>> Current message level: 0x0000000f (15)
>> drv probe link timer
>> Link detected: yes
>> # ethtool -i eth0
>> driver: i40e
>> version: 1.2.48
>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>> bus-info: 0000:02:00.0
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: yes
>> supports-register-dump: yes
>> supports-priv-flags: yes
>
> I also need the output of 'dmesg' - and I need to figure out how to
> determine what specific MDD event is occurring. I'll get back to you
> with instructions on how to do that when I get the system log from
> you.

See the attached file. It's a dmesg from boot + some minutes.
I'll upgrade the card's firmware tomorrow I guess and try out the new
drivers btw.

>
> Thanks,
>
> - Greg

--
Regards,
Christian Ruppert
Fujinaka, Todd
2015-08-26 23:25:43 UTC
Permalink
Attachments don't work on this mailing list (though they may have gotten to Greg). Please file a bug on e1000.sourceforge.net and attach the files there.

Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
***@intel.com
(503) 712-4565

-----Original Message-----
From: Christian Ruppert [mailto:***@qasl.de]
Sent: Wednesday, August 26, 2015 10:24 AM
To: Rose, Gregory V
Cc: e1000-***@lists.sf.net
Subject: Re: [E1000-devel] X710 / i40e interface resets

On 2015-08-26 01:19, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Friday, August 21, 2015 7:06 AM
>> To: Rose, Gregory V
>> Cc: e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>> >> -----Original Message-----
>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>> >> To: Rose, Gregory V
>> >> Cc: e1000-***@lists.sf.net
>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>
>
> [snip]
>
>> > I've been told that the Tx driver issue detected message is due to
>> > a MDD (Malicious Driver Detection) event. We need to find out what
>> > is causing that so if you could please send me your system log and
>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I can
>> > see what might be occurring. If not then we'll have to debug further.
>>
>> See the initial Mail for ethtool -k and so on. Also:
>> # ethtool eth0
>> Settings for eth0:
>> Supported ports: [ FIBRE ]
>> Supported link modes: 1000baseT/Full
>> 10000baseT/Full
>> Supported pause frame use: Symmetric
>> Supports auto-negotiation: No
>> Advertised link modes: 1000baseT/Full
>> 10000baseT/Full
>> Advertised pause frame use: No
>> Advertised auto-negotiation: No
>> Speed: 10000Mb/s
>> Duplex: Full
>> Port: FIBRE
>> PHYAD: 0
>> Transceiver: external
>> Auto-negotiation: off
>> Supports Wake-on: d
>> Wake-on: d
>> Current message level: 0x0000000f (15)
>> drv probe link timer
>> Link detected: yes
>> # ethtool -i eth0
>> driver: i40e
>> version: 1.2.48
>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>> bus-info: 0000:02:00.0
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: yes
>> supports-register-dump: yes
>> supports-priv-flags: yes
>
> I also need the output of 'dmesg' - and I need to figure out how to
> determine what specific MDD event is occurring. I'll get back to you
> with instructions on how to do that when I get the system log from
> you.

See the attached file. It's a dmesg from boot + some minutes.
I'll upgrade the card's firmware tomorrow I guess and try out the new drivers btw.

>
> Thanks,
>
> - Greg

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Christian Ruppert
2015-08-27 11:54:06 UTC
Permalink
Well, that's it for now anyway...

...
Power cycle is required to complete the update process.
Tool execution completed with the following status: All operations
completed successfully

The card doesn't even appear in "lspci" anymore... :/
I used a Win7 to flash it since a co-worker already broke one when
flashing via Linux. No idea how to unbrick it.


On 2015-08-27 01:25, Fujinaka, Todd wrote:
> Attachments don't work on this mailing list (though they may have
> gotten to Greg). Please file a bug on e1000.sourceforge.net and attach
> the files there.
>
> Todd Fujinaka
> Software Application Engineer
> Networking Division (ND)
> Intel Corporation
> ***@intel.com
> (503) 712-4565
>
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Wednesday, August 26, 2015 10:24 AM
> To: Rose, Gregory V
> Cc: e1000-***@lists.sf.net
> Subject: Re: [E1000-devel] X710 / i40e interface resets
>
> On 2015-08-26 01:19, Rose, Gregory V wrote:
>>> -----Original Message-----
>>> From: Christian Ruppert [mailto:***@qasl.de]
>>> Sent: Friday, August 21, 2015 7:06 AM
>>> To: Rose, Gregory V
>>> Cc: e1000-***@lists.sf.net
>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>>
>>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>>> >> -----Original Message-----
>>> >> From: Christian Ruppert [mailto:***@qasl.de]
>>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>>> >> To: Rose, Gregory V
>>> >> Cc: e1000-***@lists.sf.net
>>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>> >>
>>
>> [snip]
>>
>>> > I've been told that the Tx driver issue detected message is due to
>>> > a MDD (Malicious Driver Detection) event. We need to find out what
>>> > is causing that so if you could please send me your system log and
>>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I can
>>> > see what might be occurring. If not then we'll have to debug further.
>>>
>>> See the initial Mail for ethtool -k and so on. Also:
>>> # ethtool eth0
>>> Settings for eth0:
>>> Supported ports: [ FIBRE ]
>>> Supported link modes: 1000baseT/Full
>>> 10000baseT/Full
>>> Supported pause frame use: Symmetric
>>> Supports auto-negotiation: No
>>> Advertised link modes: 1000baseT/Full
>>> 10000baseT/Full
>>> Advertised pause frame use: No
>>> Advertised auto-negotiation: No
>>> Speed: 10000Mb/s
>>> Duplex: Full
>>> Port: FIBRE
>>> PHYAD: 0
>>> Transceiver: external
>>> Auto-negotiation: off
>>> Supports Wake-on: d
>>> Wake-on: d
>>> Current message level: 0x0000000f (15)
>>> drv probe link timer
>>> Link detected: yes
>>> # ethtool -i eth0
>>> driver: i40e
>>> version: 1.2.48
>>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>>> bus-info: 0000:02:00.0
>>> supports-statistics: yes
>>> supports-test: yes
>>> supports-eeprom-access: yes
>>> supports-register-dump: yes
>>> supports-priv-flags: yes
>>
>> I also need the output of 'dmesg' - and I need to figure out how to
>> determine what specific MDD event is occurring. I'll get back to you
>> with instructions on how to do that when I get the system log from
>> you.
>
> See the attached file. It's a dmesg from boot + some minutes.
> I'll upgrade the card's firmware tomorrow I guess and try out the new
> drivers btw.
>
>>
>> Thanks,
>>
>> - Greg
>
> --
> Regards,
> Christian Ruppert

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Rose, Gregory V
2015-08-27 14:43:52 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Thursday, August 27, 2015 4:54 AM
> To: Fujinaka, Todd
> Cc: Rose, Gregory V; e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>
> Well, that's it for now anyway...
>
> ...
> Power cycle is required to complete the update process.
> Tool execution completed with the following status: All operations
> completed successfully
>
> The card doesn't even appear in "lspci" anymore... :/ I used a Win7 to
> flash it since a co-worker already broke one when flashing via Linux. No
> idea how to unbrick it.

Christian,

I'm very sorry to hear that. It is pretty rare for this sort of thing to happen but not unheard of. Please contact ***@intel.com to get help replacing the part.

- Greg

>
>
> On 2015-08-27 01:25, Fujinaka, Todd wrote:
> > Attachments don't work on this mailing list (though they may have
> > gotten to Greg). Please file a bug on e1000.sourceforge.net and attach
> > the files there.
> >
> > Todd Fujinaka
> > Software Application Engineer
> > Networking Division (ND)
> > Intel Corporation
> > ***@intel.com
> > (503) 712-4565
> >
> > -----Original Message-----
> > From: Christian Ruppert [mailto:***@qasl.de]
> > Sent: Wednesday, August 26, 2015 10:24 AM
> > To: Rose, Gregory V
> > Cc: e1000-***@lists.sf.net
> > Subject: Re: [E1000-devel] X710 / i40e interface resets
> >
> > On 2015-08-26 01:19, Rose, Gregory V wrote:
> >>> -----Original Message-----
> >>> From: Christian Ruppert [mailto:***@qasl.de]
> >>> Sent: Friday, August 21, 2015 7:06 AM
> >>> To: Rose, Gregory V
> >>> Cc: e1000-***@lists.sf.net
> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >>>
> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
> >>> >> -----Original Message-----
> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
> >>> >> To: Rose, Gregory V
> >>> >> Cc: e1000-***@lists.sf.net
> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >>> >>
> >>
> >> [snip]
> >>
> >>> > I've been told that the Tx driver issue detected message is due to
> >>> > a MDD (Malicious Driver Detection) event. We need to find out what
> >>> > is causing that so if you could please send me your system log and
> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I can
> >>> > see what might be occurring. If not then we'll have to debug
> further.
> >>>
> >>> See the initial Mail for ethtool -k and so on. Also:
> >>> # ethtool eth0
> >>> Settings for eth0:
> >>> Supported ports: [ FIBRE ]
> >>> Supported link modes: 1000baseT/Full
> >>> 10000baseT/Full
> >>> Supported pause frame use: Symmetric
> >>> Supports auto-negotiation: No
> >>> Advertised link modes: 1000baseT/Full
> >>> 10000baseT/Full
> >>> Advertised pause frame use: No
> >>> Advertised auto-negotiation: No
> >>> Speed: 10000Mb/s
> >>> Duplex: Full
> >>> Port: FIBRE
> >>> PHYAD: 0
> >>> Transceiver: external
> >>> Auto-negotiation: off
> >>> Supports Wake-on: d
> >>> Wake-on: d
> >>> Current message level: 0x0000000f (15)
> >>> drv probe link timer
> >>> Link detected: yes
> >>> # ethtool -i eth0
> >>> driver: i40e
> >>> version: 1.2.48
> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
> >>> bus-info: 0000:02:00.0
> >>> supports-statistics: yes
> >>> supports-test: yes
> >>> supports-eeprom-access: yes
> >>> supports-register-dump: yes
> >>> supports-priv-flags: yes
> >>
> >> I also need the output of 'dmesg' - and I need to figure out how to
> >> determine what specific MDD event is occurring. I'll get back to you
> >> with instructions on how to do that when I get the system log from
> >> you.
> >
> > See the attached file. It's a dmesg from boot + some minutes.
> > I'll upgrade the card's firmware tomorrow I guess and try out the new
> > drivers btw.
> >
> >>
> >> Thanks,
> >>
> >> - Greg
> >
> > --
> > Regards,
> > Christian Ruppert
>
> --
> Regards,
> Christian Ruppert

------------------------------------------------------------------------------
Christian Ruppert
2015-09-25 14:19:00 UTC
Permalink
Hi,

the card came back and I had to flash it again but it worked perfectly
fine this time :)
So I setup a new Kernel (3.18.20) and the most recent i40e driver
(1.3.39.1) and removed the previous workaround to disable ntuples on
both interfaces. So basically a vanilla setup.
That host is up for several hours no and there was no spam so far and
only one reset yet:
Sep 25 12:38:54 somehost kernel: [77571.409182] i40e 0000:02:00.1: TX
driver issue detected, PF reset issued
Sep 25 12:38:55 somehost kernel: [77572.245943] bond0: link status up
again after 0 ms for interface eth1

and here's the requested dmesg again:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.20 (***@somehost) (gcc version 4.7.2
(Debian 4.7.2-5) ) #1 SMP Wed Aug 26 14:25:15 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff]
usable
[ 0.000000] BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000becc8fff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000becc9000-0x00000000bed0bfff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bed0c000-0x00000000ce491fff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce492000-0x00000000ce534fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ce535000-0x00000000ce5c6fff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce5c7000-0x00000000ce68bfff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ce68c000-0x00000000cf7fefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff]
usable
[ 0.000000] console [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2
02/20/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 800000000 mask FE0000000 write-back
[ 0.000000] 2 base 820000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
reserved
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped
at [ffff8800000fd7b0]
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size
24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
[ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
[ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
[ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M
[ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
[ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff]
[ 0.000000] [mem 0x800000000-0x82bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbecc8fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbebfffff] page 2M
[ 0.000000] [mem 0xbec00000-0xbecc8fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbed0c000-0xce491fff]
[ 0.000000] [mem 0xbed0c000-0xbedfffff] page 4k
[ 0.000000] [mem 0xbee00000-0xce3fffff] page 2M
[ 0.000000] [mem 0xce400000-0xce491fff] page 4k
[ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
[ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xce535000-0xce5c6fff]
[ 0.000000] [mem 0xce535000-0xce5c6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x360c0000-0x37057fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
[ 0.000000] ACPI: XSDT 0x00000000CE64F088 00008C (v01 SUPERM SMCI--MB
00000001 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CE65A210 00010C (v05 SUPERM SMCI--MB
00000001 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CE64F1A8 00B068 (v02 SUPERM SMCI--MB
00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CE68A080 000040
[ 0.000000] ACPI: APIC 0x00000000CE65A320 000092 (v03 SUPERM SMCI--MB
00000001 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CE65A3B8 000044 (v01 SUPERM SMCI--MB
00000001 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CE65A400 00003C (v01 SUPERM SMCI--MB
00000001 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CE65A440 000038 (v01 SUPERM SMCI--MB
00000001 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CE65A478 000397 (v01 SataRe SataTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: SPMI 0x00000000CE65A810 000040 (v05 A M I OEMSPMI
00000000 AMI. 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CE65A850 0009A4 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CE65B1F8 000B18 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.000000] ACPI: EINJ 0x00000000CE65BD10 000130 (v01 AMI AMI EINJ
00000000 00000000)
[ 0.000000] ACPI: ERST 0x00000000CE65BE40 000210 (v01 AMIER AMI ERST
00000000 00000000)
[ 0.000000] ACPI: HEST 0x00000000CE65C050 0000A8 (v01 AMI AMI HEST
00000000 00000000)
[ 0.000000] ACPI: BERT 0x00000000CE65C0F8 000030 (v01 AMI AMI BERT
00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem
0x0000000000000000-0x000000082fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x82ffdc000-0x82ffdffff]
[ 0.000000] [ffffea0000000000-ffffea001cbfffff] PMD ->
[ffff88080f600000-ffff88082b7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x82fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00098fff]
[ 0.000000] node 0: [mem 0x00100000-0xbecc8fff]
[ 0.000000] node 0: [mem 0xbed0c000-0xce491fff]
[ 0.000000] node 0: [mem 0xce535000-0xce5c6fff]
[ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x82fffffff]
[ 0.000000] On node 0 totalpages: 8381562
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11498 pages used for memmap
[ 0.000000] DMA32 zone: 840930 pages, LIFO batch:31
[ 0.000000] Normal zone: 103040 pages used for memmap
[ 0.000000] Normal zone: 7536640 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecc9000-0xbed0bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce492000-0xce534fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce5c7000-0xce68bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce68c000-0xcf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf800000-0xdfffffff] available for PCI
devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s80960
r8192 d29632 u262144
[ 0.000000] pcpu-alloc: s80960 r8192 d29632 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 8266947
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
[ 0.000000] Intel-IOMMU: disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
[ 0.000000] Memory: 32970712K/33526248K available (5512K kernel code,
966K rwdata, 1832K rodata, 1228K init, 852K bss, 555536K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 3499.669 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6999.33 BogoMIPS (lpj=13998676)
[ 0.010617] pid_max: default: 32768 minimum: 301
[ 0.015230] ACPI: Core revision 20140926
[ 0.024681] ACPI: All ACPI Tables successfully acquired
[ 0.039606] Security Framework initialized
[ 0.043611] AppArmor: AppArmor disabled by boot time parameter
[ 0.049421] Yama: becoming mindful.
[ 0.054266] Dentry cache hash table entries: 4194304 (order: 13,
33554432 bytes)
[ 0.067119] Inode-cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.076825] Mount-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.083636] Mountpoint-cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.091133] Initializing cgroup subsys memory
[ 0.095401] Initializing cgroup subsys devices
[ 0.099824] Initializing cgroup subsys freezer
[ 0.104249] Initializing cgroup subsys net_cls
[ 0.108676] Initializing cgroup subsys blkio
[ 0.112929] Initializing cgroup subsys perf_event
[ 0.117615] Initializing cgroup subsys net_prio
[ 0.122145] CPU: Physical Processor ID: 0
[ 0.126120] CPU: Processor Core ID: 0
[ 0.129769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.129769] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.143037] mce: CPU supports 9 MCE banks
[ 0.146959] CPU0: Thermal monitoring enabled (TM1)
[ 0.151728] process: using mwait in idle threads
[ 0.156328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.156328] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.168125] Freeing SMP alternatives memory: 20K (ffffffff81a26000 -
ffffffff81a2b000)
[ 0.176733] ftrace: allocating 22083 entries in 87 pages
[ 0.197324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.242968] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 V2 @ 3.50GHz
(fam: 06, model: 3a, stepping: 09)
[ 0.252247] TSC deadline timer enabled
[ 0.252264] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge
events, full-width counters, Intel PMU driver.
[ 0.262484] ... version: 3
[ 0.266477] ... bit width: 48
[ 0.270555] ... generic registers: 4
[ 0.274548] ... value mask: 0000ffffffffffff
[ 0.279843] ... max period: 0000ffffffffffff
[ 0.285137] ... fixed-purpose events: 3
[ 0.289130] ... event mask: 000000070000000f
[ 0.295409] x86: Booting SMP configuration:
[ 0.299494] .... node #0, CPUs: #1
[ 0.316534] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.324669] #2 #3 #4 #5 #6 #7
[ 0.407240] x86: Booted up 1 node, 8 CPUs
[ 0.411319] smpboot: Total of 8 processors activated (55994.70
BogoMIPS)
[ 0.424047] devtmpfs: initialized
[ 0.430926] PM: Registering ACPI NVS region [mem
0xbecc9000-0xbed0bfff] (274432 bytes)
[ 0.438777] PM: Registering ACPI NVS region [mem
0xce5c7000-0xce68bfff] (806912 bytes)
[ 0.447304] pinctrl core: initialized pinctrl subsystem
[ 0.452519] NET: Registered protocol family 16
[ 0.468890] cpuidle: using governor ladder
[ 0.488929] cpuidle: using governor menu
[ 0.492803] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.500309] ACPI: bus type PCI registered
[ 0.504301] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.510784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.520010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
E820
[ 0.526980] PCI: Using configuration type 1 for base access
[ 0.544821] ACPI: Added _OSI(Module Device)
[ 0.548905] ACPI: Added _OSI(Processor Device)
[ 0.553330] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.558017] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.565243] ACPI: Executed 1 blocks of module-level executable AML
code
[ 0.739624] \_SB_:_OSC invalid UUID
[ 0.739625] _OSC request data:1 1f
[ 0.739811] ACPI: Dynamic OEM Table Load:
[ 0.743707] ACPI: SSDT 0xFFFF880807B5C000 00083B (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.764280] ACPI: Dynamic OEM Table Load:
[ 0.768173] ACPI: SSDT 0xFFFF880807049C00 000303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.788649] ACPI: Dynamic OEM Table Load:
[ 0.792543] ACPI: SSDT 0xFFFF880807007C00 000119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.813761] ACPI: Interpreter enabled
[ 0.817329] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20140926/hwxface-580)
[ 0.826523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S3_] (20140926/hwxface-580)
[ 0.835727] ACPI: (supports S0 S1 S4 S5)
[ 0.839628] ACPI: Using IOAPIC for interrupt routing
[ 0.844615] HEST: Table parsing has been initialized.
[ 0.849610] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.863689] ACPI: Power Resource [FN00] (off)
[ 0.868006] ACPI: Power Resource [FN01] (off)
[ 0.872344] ACPI: Power Resource [FN02] (off)
[ 0.876682] ACPI: Power Resource [FN03] (off)
[ 0.881022] ACPI: Power Resource [FN04] (off)
[ 0.885681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.891767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.900002] acpi PNP0A08:00: _OSC: platform does not support
[PCIeHotplug PME]
[ 0.907216] acpi PNP0A08:00: _OSC: OS now controls [AER
PCIeCapability]
[ 0.914173] PCI host bridge to bus 0000:00
[ 0.918169] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.923636] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.929798] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.935959] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.942817] pci_bus 0000:00: root bus resource [mem
0x000cc000-0x000cffff]
[ 0.949673] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000d3fff]
[ 0.956530] pci_bus 0000:00: root bus resource [mem
0x000d4000-0x000d7fff]
[ 0.963386] pci_bus 0000:00: root bus resource [mem
0x000d8000-0x000dbfff]
[ 0.970243] pci_bus 0000:00: root bus resource [mem
0x000dc000-0x000dffff]
[ 0.977101] pci_bus 0000:00: root bus resource [mem
0x000e0000-0x000e3fff]
[ 0.983957] pci_bus 0000:00: root bus resource [mem
0x000e4000-0x000e7fff]
[ 0.990814] pci_bus 0000:00: root bus resource [mem
0xd0000000-0xfeafffff]
[ 0.997674] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
[ 0.997751] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.997831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.997870] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.003450] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
[ 1.003473] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 1.003502] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 1.009121] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 1.009138] pci 0000:00:19.0: reg 0x10: [mem 0xdfb00000-0xdfb1ffff]
[ 1.009145] pci 0000:00:19.0: reg 0x14: [mem 0xdfb25000-0xdfb25fff]
[ 1.009153] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
[ 1.009212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.009246] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 1.014835] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.014854] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb24000-0xdfb243ff]
[ 1.014938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.014983] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.020571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.020648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.020686] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.026274] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.026351] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.026388] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.031981] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.032000] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb23000-0xdfb233ff]
[ 1.032084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.032129] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.037718] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 1.037791] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.043379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
[ 1.043532] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 1.043549] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 1.043556] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 1.043563] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 1.043570] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 1.043577] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
[ 1.043584] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb22000-0xdfb227ff]
[ 1.043625] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.043684] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.043697] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb21000-0xdfb210ff
64bit]
[ 1.043716] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
[ 1.043832] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.048735] pci 0000:02:00.0: [8086:1572] type 00 class 0x020000
[ 1.048745] pci 0000:02:00.0: reg 0x10: [mem 0xdd800000-0xddffffff
64bit pref]
[ 1.048755] pci 0000:02:00.0: reg 0x1c: [mem 0xde808000-0xde80ffff
64bit pref]
[ 1.048764] pci 0000:02:00.0: reg 0x30: [mem 0xdfa80000-0xdfafffff
pref]
[ 1.048800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.048818] pci 0000:02:00.0: reg 0x184: [mem 0xde400000-0xde40ffff
64bit pref]
[ 1.048827] pci 0000:02:00.0: reg 0x190: [mem 0xde910000-0xde913fff
64bit pref]
[ 1.048862] pci 0000:02:00.1: [8086:1572] type 00 class 0x020000
[ 1.048872] pci 0000:02:00.1: reg 0x10: [mem 0xdd000000-0xdd7fffff
64bit pref]
[ 1.048882] pci 0000:02:00.1: reg 0x1c: [mem 0xde800000-0xde807fff
64bit pref]
[ 1.048891] pci 0000:02:00.1: reg 0x30: [mem 0xdfa00000-0xdfa7ffff
pref]
[ 1.048925] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 1.048942] pci 0000:02:00.1: reg 0x184: [mem 0xde000000-0xde00ffff
64bit pref]
[ 1.048951] pci 0000:02:00.1: reg 0x190: [mem 0xde810000-0xde813fff
64bit pref]
[ 1.056725] pci 0000:00:01.1: PCI bridge to [bus 02-03]
[ 1.061856] pci 0000:00:01.1: bridge window [mem
0xdfa00000-0xdfafffff]
[ 1.061858] pci 0000:00:01.1: bridge window [mem
0xdd000000-0xdeafffff 64bit pref]
[ 1.061915] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 1.066903] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
[ 1.066942] pci 0000:05:00.0: reg 0x10: [mem 0xdf900000-0xdf91ffff]
[ 1.066987] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
[ 1.067010] pci 0000:05:00.0: reg 0x1c: [mem 0xdf920000-0xdf923fff]
[ 1.067239] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.067289] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 1.080881] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 1.085759] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 1.085762] pci 0000:00:1c.4: bridge window [mem
0xdf900000-0xdf9fffff]
[ 1.085807] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
[ 1.085822] pci 0000:06:03.0: reg 0x10: [mem 0xdc000000-0xdcffffff
pref]
[ 1.085831] pci 0000:06:03.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
[ 1.085839] pci 0000:06:03.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
[ 1.085948] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive
decode)
[ 1.092645] pci 0000:00:1e.0: bridge window [mem
0xdf000000-0xdf8fffff]
[ 1.092650] pci 0000:00:1e.0: bridge window [mem
0xdc000000-0xdcffffff 64bit pref]
[ 1.092651] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 1.092652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 1.092653] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 1.092655] pci 0000:00:1e.0: bridge window [mem
0x000cc000-0x000cffff] (subtractive decode)
[ 1.092656] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000d3fff] (subtractive decode)
[ 1.092657] pci 0000:00:1e.0: bridge window [mem
0x000d4000-0x000d7fff] (subtractive decode)
[ 1.092658] pci 0000:00:1e.0: bridge window [mem
0x000d8000-0x000dbfff] (subtractive decode)
[ 1.092659] pci 0000:00:1e.0: bridge window [mem
0x000dc000-0x000dffff] (subtractive decode)
[ 1.092660] pci 0000:00:1e.0: bridge window [mem
0x000e0000-0x000e3fff] (subtractive decode)
[ 1.092661] pci 0000:00:1e.0: bridge window [mem
0x000e4000-0x000e7fff] (subtractive decode)
[ 1.092662] pci 0000:00:1e.0: bridge window [mem
0xd0000000-0xfeafffff] (subtractive decode)
[ 1.092690] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
unsupported)
[ 1.100314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 1.107107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12
14 15)
[ 1.113962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12
14 15)
[ 1.120818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 1.127675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12
14 15)
[ 1.134531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 1.142515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 1.150505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 1.157484] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.162221] vgaarb: setting as boot device: PCI:0000:06:03.0
[ 1.167794] vgaarb: device added:
PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.175867] vgaarb: loaded
[ 1.178556] vgaarb: bridge control possible 0000:06:03.0
[ 1.183909] PCI: Using ACPI for IRQ routing
[ 1.193792] PCI: pci_cache_line_size set to 64 bytes
[ 1.193833] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
[ 1.193834] e820: reserve RAM buffer [mem 0xbecc9000-0xbfffffff]
[ 1.193835] e820: reserve RAM buffer [mem 0xce492000-0xcfffffff]
[ 1.193836] e820: reserve RAM buffer [mem 0xce5c7000-0xcfffffff]
[ 1.193837] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 1.193935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.199994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.207831] Switched to clocksource hpet
[ 1.215086] pnp: PnP ACPI init
[ 1.218096] system 00:00: [mem 0xfed40000-0xfed44fff] has been
reserved
[ 1.224641] system 00:00: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 1.224688] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.230542] system 00:01: [io 0x1000-0x100f] has been reserved
[ 1.236442] system 00:01: [io 0xffff] has been reserved
[ 1.241736] system 00:01: [io 0xffff] has been reserved
[ 1.247031] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 1.253282] system 00:01: [io 0x0458-0x047f] has been reserved
[ 1.259182] system 00:01: [io 0x0500-0x057f] has been reserved
[ 1.265084] system 00:01: [io 0x164e-0x164f] has been reserved
[ 1.270987] system 00:01: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 1.271008] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 1.271039] system 00:03: [io 0x0454-0x0457] has been reserved
[ 1.276891] system 00:03: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 1.276924] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.282792] system 00:04: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 1.282868] system 00:05: [io 0x0a00-0x0a1f] has been reserved
[ 1.288693] system 00:05: [io 0x0a30-0x0a3f] has been reserved
[ 1.294594] system 00:05: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 1.294751] pnp 00:06: [dma 0 disabled]
[ 1.294780] pnp 00:06: Plug and Play ACPI device, IDs PNP0501
(active)
[ 1.294921] pnp 00:07: [dma 0 disabled]
[ 1.294947] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
(active)
[ 1.295019] system 00:08: [io 0x0b00-0x0b7f] has been reserved
[ 1.300845] system 00:08: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 1.300958] pnp 00:09: [dma 0 disabled]
[ 1.300985] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
(active)
[ 1.301064] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001
(active)
[ 1.301198] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been
reserved
[ 1.307720] system 00:0b: [mem 0xfed10000-0xfed17fff] has been
reserved
[ 1.314314] system 00:0b: [mem 0xfed18000-0xfed18fff] has been
reserved
[ 1.320909] system 00:0b: [mem 0xfed19000-0xfed19fff] has been
reserved
[ 1.327506] system 00:0b: [mem 0xe0000000-0xefffffff] has been
reserved
[ 1.334102] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been
reserved
[ 1.340701] system 00:0b: [mem 0xfed90000-0xfed93fff] has been
reserved
[ 1.347295] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been
reserved
[ 1.353892] system 00:0b: [mem 0xff000000-0xffffffff] has been
reserved
[ 1.360488] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 1.367430] system 00:0b: [mem 0xd0000000-0xd0000fff] has been
reserved
[ 1.374027] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 1.374113] pnp: PnP ACPI: found 12 devices
[ 1.384167] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.389053] pci 0000:00:01.1: PCI bridge to [bus 02-03]
[ 1.394250] pci 0000:00:01.1: bridge window [mem
0xdfa00000-0xdfafffff]
[ 1.401020] pci 0000:00:01.1: bridge window [mem
0xdd000000-0xdeafffff 64bit pref]
[ 1.408745] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 1.413701] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 1.418641] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 1.424718] pci 0000:00:1c.4: bridge window [mem
0xdf900000-0xdf9fffff]
[ 1.431489] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 1.436435] pci 0000:00:1e.0: bridge window [mem
0xdf000000-0xdf8fffff]
[ 1.443203] pci 0000:00:1e.0: bridge window [mem
0xdc000000-0xdcffffff 64bit pref]
[ 1.450929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.450931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.450932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.450933] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
[ 1.450934] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
[ 1.450935] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
[ 1.450936] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
[ 1.450937] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
[ 1.450938] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff]
[ 1.450939] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff]
[ 1.450940] pci_bus 0000:00: resource 14 [mem 0xd0000000-0xfeafffff]
[ 1.450941] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
[ 1.450942] pci_bus 0000:02: resource 2 [mem 0xdd000000-0xdeafffff
64bit pref]
[ 1.450943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.450944] pci_bus 0000:05: resource 1 [mem 0xdf900000-0xdf9fffff]
[ 1.450946] pci_bus 0000:06: resource 1 [mem 0xdf000000-0xdf8fffff]
[ 1.450947] pci_bus 0000:06: resource 2 [mem 0xdc000000-0xdcffffff
64bit pref]
[ 1.450948] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 1.450949] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 1.450950] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.450951] pci_bus 0000:06: resource 7 [mem 0x000cc000-0x000cffff]
[ 1.450952] pci_bus 0000:06: resource 8 [mem 0x000d0000-0x000d3fff]
[ 1.450953] pci_bus 0000:06: resource 9 [mem 0x000d4000-0x000d7fff]
[ 1.450954] pci_bus 0000:06: resource 10 [mem 0x000d8000-0x000dbfff]
[ 1.450955] pci_bus 0000:06: resource 11 [mem 0x000dc000-0x000dffff]
[ 1.450956] pci_bus 0000:06: resource 12 [mem 0x000e0000-0x000e3fff]
[ 1.450957] pci_bus 0000:06: resource 13 [mem 0x000e4000-0x000e7fff]
[ 1.450958] pci_bus 0000:06: resource 14 [mem 0xd0000000-0xfeafffff]
[ 1.451014] NET: Registered protocol family 2
[ 1.455462] TCP established hash table entries: 262144 (order: 9,
2097152 bytes)
[ 1.463005] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[ 1.469713] TCP: Hash tables configured (established 262144 bind
65536)
[ 1.476246] TCP: reno registered
[ 1.479464] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.485680] UDP-Lite hash table entries: 16384 (order: 7, 524288
bytes)
[ 1.492306] NET: Registered protocol family 1
[ 1.496818] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 1.496823] pci 0000:06:03.0: Video device with shadowed ROM
[ 1.496853] Unpacking initramfs...
[ 1.690454] Freeing initrd memory: 15968K (ffff8800360c0000 -
ffff880037058000)
[ 1.697700] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.704118] software IO TLB [mem 0xca492000-0xce492000] (64MB) mapped
at [ffff8800ca492000-ffff8800ce491fff]
[ 1.714164] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.724674] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.730426] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.736250] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.750730] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.756546] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.762360] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.768179] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.773991] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
[ 1.779835] microcode: Microcode Update Driver: v2.00
<***@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.788826] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.795033] audit: initializing netlink subsys (disabled)
[ 1.800388] audit: type=2000 audit(1443100076.548:1): initialized
[ 1.806664] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.812933] zpool: loaded
[ 1.815517] zbud: loaded
[ 1.818158] VFS: Disk quotas dquot_6.5.2
[ 1.821997] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.828445] msgmni has been set to 32768
[ 1.832595] alg: No test for stdrng (krng)
[ 1.836625] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 1.844014] io scheduler noop registered
[ 1.847878] io scheduler deadline registered
[ 1.852131] io scheduler cfq registered (default)
[ 1.856959] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.857070] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
[ 1.857283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.862775] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 1.869391] intel_idle: MWAIT substates: 0x1120
[ 1.869392] intel_idle: v0.4 model 0x3A
[ 1.869393] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.869628] ERST: Error Record Serialization Table (ERST) support is
initialized.
[ 1.877034] pstore: Registered erst as persistent store backend
[ 1.882975] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 1.889229] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.915898] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 1.943574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
is a 16550A
[ 1.971232] 00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud = 115200)
is a 16550A
[ 1.978753] Linux agpgart interface v0.103
[ 1.982831] i8042: PNP: No PS/2 controller found. Probing ports
directly.
[ 1.992701] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.997575] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.002720] mousedev: PS/2 mouse device common for all mice
[ 2.008232] rtc_cmos 00:02: RTC can wake from S4
[ 2.012908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.018943] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 2.026564] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.032717] AMD IOMMUv2 driver by Joerg Roedel <***@amd.com>
[ 2.039059] AMD IOMMUv2 functionality not available on this system
[ 2.045283] TCP: cubic registered
[ 2.048521] IPv6: Loaded, but administratively disabled, reboot
required to enable
[ 2.056071] mip6: Mobile IPv6
[ 2.059020] mip6: mip6_init: can't add xfrm type(destopt)
[ 2.064404] NET: Registered protocol family 17
[ 2.068836] mpls_gso: MPLS GSO support
[ 2.072972] registered taskstats version 1
[ 2.077499] rtc_cmos 00:02: setting system clock to 2015-09-24
13:07:57 UTC (1443100077)
[ 2.085560] PM: Hibernation image not present or could not be loaded.
[ 2.086094] Freeing unused kernel memory: 1228K (ffffffff818f3000 -
ffffffff81a26000)
[ 2.093851] Write protecting the kernel read-only data: 8192k
[ 2.100532] Freeing unused kernel memory: 620K (ffff880001565000 -
ffff880001600000)
[ 2.108556] Freeing unused kernel memory: 216K (ffff8800017ca000 -
ffff880001800000)
[ 2.123393] udevd[94]: starting version 175
[ 2.131920] pps_core: LinuxPPS API ver. 1 registered
[ 2.136823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <***@linux.it>
[ 2.147106] PTP clock support registered
[ 2.151071] ACPI: bus type USB registered
[ 2.155038] usbcore: registered new interface driver usbfs
[ 2.160469] usbcore: registered new interface driver hub
[ 2.165787] usbcore: registered new device driver usb
[ 2.171019] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.176789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 2.182928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 2.189595] ehci-pci: EHCI PCI platform driver
[ 2.194192] i40e: Intel(R) Ethernet Connection XL710 Network Driver -
version 1.3.39.1
[ 2.197599] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 2.197641] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 2.198073] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.198073] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.198216] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.198216] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.231104] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
[ 2.249391] i40e 0000:02:00.0: fw 4.40.35115 api 1.4 nvm 4.53
0x80001dc0 1.123.0
[ 2.256998] SCSI subsystem initialized
[ 2.261957] libata version 3.00 loaded.
[ 2.453377] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.458796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
00:25:90:a8:02:51
[ 2.466693] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
Connection
[ 2.473600] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
FFFFFF-0FF
[ 2.480564] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.480631] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 2.480663] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 2.480665] e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
[ 2.480667] e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
[ 2.495076] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 2.495874] i40e 0000:02:00.0: MAC address: 3c:fd:fe:9c:56:b8
[ 2.499857] i40e 0000:02:00.0: SAN MAC: 3c:fd:fe:9c:56:ba
[ 2.513542] ehci-pci 0000:00:1a.0: debug port 2
[ 2.514095] i40e 0000:02:00.0: irq 30 for MSI/MSI-X
[ 2.514098] i40e 0000:02:00.0: irq 31 for MSI/MSI-X
[ 2.514099] i40e 0000:02:00.0: irq 32 for MSI/MSI-X
[ 2.514101] i40e 0000:02:00.0: irq 33 for MSI/MSI-X
[ 2.514103] i40e 0000:02:00.0: irq 34 for MSI/MSI-X
[ 2.514105] i40e 0000:02:00.0: irq 35 for MSI/MSI-X
[ 2.514107] i40e 0000:02:00.0: irq 36 for MSI/MSI-X
[ 2.514108] i40e 0000:02:00.0: irq 37 for MSI/MSI-X
[ 2.514110] i40e 0000:02:00.0: irq 38 for MSI/MSI-X
[ 2.514111] i40e 0000:02:00.0: irq 39 for MSI/MSI-X
[ 2.514113] i40e 0000:02:00.0: irq 40 for MSI/MSI-X
[ 2.514114] i40e 0000:02:00.0: irq 41 for MSI/MSI-X
[ 2.514116] i40e 0000:02:00.0: irq 42 for MSI/MSI-X
[ 2.514118] i40e 0000:02:00.0: irq 43 for MSI/MSI-X
[ 2.514119] i40e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.514121] i40e 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.514122] i40e 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.514124] i40e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.521951] ehci-pci 0000:00:1a.0: cache line size of 64 is not
supported
[ 2.521964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb24000
[ 2.537912] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.543607] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.550333] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.557541] usb usb1: Product: EHCI Host Controller
[ 2.562399] usb usb1: Manufacturer: Linux 3.18.20 ehci_hcd
[ 2.568471] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.573164] hub 1-0:1.0: USB hub found
[ 2.576818] hub 1-0:1.0: 2 ports detected
[ 2.580962] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.586095] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 2.593480] ehci-pci 0000:00:1d.0: debug port 2
[ 2.599535] e1000e 0000:05:00.0 eth2: registered PHC clock
[ 2.601911] ehci-pci 0000:00:1d.0: cache line size of 64 is not
supported
[ 2.601922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb23000
[ 2.610602] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width x1)
00:25:90:a8:02:50
[ 2.613936] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.613963] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.613964] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.613965] usb usb2: Product: EHCI Host Controller
[ 2.613965] usb usb2: Manufacturer: Linux 3.18.20 ehci_hcd
[ 2.613966] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.614075] hub 2-0:1.0: USB hub found
[ 2.614078] hub 2-0:1.0: 2 ports detected
[ 2.614192] ahci 0000:00:1f.2: version 3.0
[ 2.614340] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[ 2.614485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps
0x3f impl SATA mode
[ 2.614486] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
part ems apst
[ 2.626630] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x8
[ 2.654604] scsi host0: ahci
[ 2.654992] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66
QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
[ 2.657763] scsi host1: ahci
[ 2.658083] scsi host2: ahci
[ 2.658320] scsi host3: ahci
[ 2.658546] scsi host4: ahci
[ 2.658747] scsi host5: ahci
[ 2.658785] ata1: SATA max UDMA/133 abar ***@0xdfb22000 port
0xdfb22100 irq 48
[ 2.658788] ata2: SATA max UDMA/133 abar ***@0xdfb22000 port
0xdfb22180 irq 48
[ 2.658790] ata3: SATA max UDMA/133 abar ***@0xdfb22000 port
0xdfb22200 irq 48
[ 2.658792] ata4: SATA max UDMA/133 abar ***@0xdfb22000 port
0xdfb22280 irq 48
[ 2.658795] ata5: SATA max UDMA/133 abar ***@0xdfb22000 port
0xdfb22300 irq 48
[ 2.658798] ata6: SATA max UDMA/133 abar ***@0xdfb22000 port
0xdfb22380 irq 48
[ 2.670025] i40e 0000:02:00.1: fw 4.40.35115 api 1.4 nvm 4.53
0x80001dc0 1.123.0
[ 2.714122] tsc: Refined TSC clocksource calibration: 3500.024 MHz
[ 2.769612] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network
Connection
[ 2.776551] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No:
FFFFFF-0FF
[ 2.890322] usb 1-1: new high-speed USB device number 2 using
ehci-pci
[ 2.916415] i40e 0000:02:00.1: MAC address: 3c:fd:fe:9c:56:b9
[ 2.926260] i40e 0000:02:00.1: SAN MAC: 3c:fd:fe:9c:56:bb
[ 2.930381] usb 2-1: new high-speed USB device number 2 using
ehci-pci
[ 2.952496] i40e 0000:02:00.1: irq 49 for MSI/MSI-X
[ 2.952503] i40e 0000:02:00.1: irq 50 for MSI/MSI-X
[ 2.952508] i40e 0000:02:00.1: irq 51 for MSI/MSI-X
[ 2.952512] i40e 0000:02:00.1: irq 52 for MSI/MSI-X
[ 2.952516] i40e 0000:02:00.1: irq 53 for MSI/MSI-X
[ 2.952520] i40e 0000:02:00.1: irq 54 for MSI/MSI-X
[ 2.952525] i40e 0000:02:00.1: irq 55 for MSI/MSI-X
[ 2.952537] i40e 0000:02:00.1: irq 56 for MSI/MSI-X
[ 2.952539] i40e 0000:02:00.1: irq 57 for MSI/MSI-X
[ 2.952541] i40e 0000:02:00.1: irq 58 for MSI/MSI-X
[ 2.952543] i40e 0000:02:00.1: irq 59 for MSI/MSI-X
[ 2.952545] i40e 0000:02:00.1: irq 60 for MSI/MSI-X
[ 2.952547] i40e 0000:02:00.1: irq 61 for MSI/MSI-X
[ 2.952549] i40e 0000:02:00.1: irq 62 for MSI/MSI-X
[ 2.952550] i40e 0000:02:00.1: irq 63 for MSI/MSI-X
[ 2.952554] i40e 0000:02:00.1: irq 64 for MSI/MSI-X
[ 2.952556] i40e 0000:02:00.1: irq 65 for MSI/MSI-X
[ 2.952558] i40e 0000:02:00.1: irq 66 for MSI/MSI-X
[ 2.978497] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.983838] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.989225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.995381] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.000756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.007184] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.012510] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 3.012514] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 3.020391] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 3.026954] usb 1-1: New USB device found, idVendor=8087,
idProduct=0024
[ 3.026955] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.027240] hub 1-1:1.0: USB hub found
[ 3.027332] hub 1-1:1.0: 6 ports detected
[ 3.050510] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 3.050512] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 3.061847] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x8
[ 3.067012] usb 2-1: New USB device found, idVendor=8087,
idProduct=0024
[ 3.067013] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.067296] hub 2-1:1.0: USB hub found
[ 3.067384] hub 2-1:1.0: 6 ports detected
[ 3.090237] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66
QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
[ 3.103551] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 3.112266] ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10250, max
UDMA/133
[ 3.118799] ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth
31/32)
[ 3.125486] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, 1.00, max UDMA/133
[ 3.132254] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 3.132259] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 3.140106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 3.148916] ata1.00: configured for UDMA/133
[ 3.153298] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BA20
0250 PQ: 0 ANSI: 5
[ 3.154140] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 3.154142] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 3.154143] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 3.156130] ata3.00: configured for UDMA/133
[ 3.185352] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N
1.00 PQ: 0 ANSI: 5
[ 3.298953] usb 1-1.2: new full-speed USB device number 3 using
ehci-pci
[ 3.323219] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200
GB/186 GiB)
[ 3.330670] sd 0:0:0:0: [sda] Write Protect is off
[ 3.335418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.335427] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.338917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 3.338918] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.339081] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.358408] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.358668] sda: sda1 sda2
[ 3.358886] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.371134] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.396737] usb 1-1.2: New USB device found, idVendor=0557,
idProduct=2221
[ 3.403526] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.410814] usb 1-1.2: Product: Hermon USB hidmouse Device
[ 3.416282] usb 1-1.2: Manufacturer: Winbond Electronics Corp
[ 3.423736] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.430436] usbcore: registered new interface driver usbhid
[ 3.435922] usbhid: USB HID core driver
[ 3.440716] input: Winbond Electronics Corp Hermon USB hidmouse
Device as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0557:2221.0001/input/input2
[ 3.455434] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID
v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on
usb-0000:00:1a.0-1.2/input0
[ 3.470147] input: Winbond Electronics Corp Hermon USB hidmouse
Device as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0557:2221.0002/input/input3
[ 3.484849] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID
v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on
usb-0000:00:1a.0-1.2/input1
[ 3.507384] PM: Starting manual resume from disk
[ 3.511922] PM: Hibernation image partition 8:1 present
[ 3.511923] PM: Looking for hibernation image.
[ 3.512127] PM: Image not found (code -22)
[ 3.512131] PM: Hibernation image not present or could not be loaded.
[ 3.517313] EXT4-fs (sda2): mounting ext3 file system using the ext4
subsystem
[ 3.529000] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 3.715841] Switched to clocksource tsc
[ 3.885031] udevd[667]: starting version 175
[ 4.011695] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 4.020070] ACPI: Power Button [PWRB]
[ 4.023703] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.031033] ACPI: Power Button [PWRF]
[ 4.034781] EDAC MC: Ver: 3.0.0
[ 4.038626] EDAC MC0: Giving out device to module ie31200_edac
controller IE31200: DEV 0000:00:00.0 (POLLED)
[ 4.115904] ipmi message handler version 39.2
[ 4.121319] IPMI System Interface driver.
[ 4.126068] ipmi_si: probing via ACPI
[ 4.129851] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 4.135777] i40e 0000:02:00.1 rename5: renamed from eth3
[ 4.141149] ipmi_si: Adding ACPI-specified kcs state machine
[ 4.147092] ipmi_si: probing via SMBIOS
[ 4.147160] input: PC Speaker as
/devices/platform/pcspkr/input/input6
[ 4.157409] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 4.163305] ipmi_si: Adding SMBIOS-specified kcs state machine
duplicate interface
[ 4.170854] ipmi_si: probing via SPMI
[ 4.174504] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 4.177849] i40e 0000:02:00.0 rename3: renamed from eth1
[ 4.185527] ipmi_si: Adding SPMI-specified kcs state machine
[ 4.185655] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000400-0x000000000000047F (\PMIO) (20140926/utaddress-254)
[ 4.185658] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.185660] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
[ 4.185662] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.185662] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
[ 4.185664] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.185664] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
[ 4.185665] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.185665] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.280990] iTCO_vendor_support: vendor-support=0
[ 4.304270] duplicate interface
[ 4.307664] ipmi_si: Trying ACPI-specified kcs state machine at i/o
address 0xca2, slave address 0x0, irq 0
[ 4.318187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.323711] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 4.323818] e1000e 0000:00:19.0 eth3: renamed from eth0
[ 4.336446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.342474] AVX version of gcm_enc/dec engaged.
[ 4.346907] AES CTR mode by8 optimization enabled
[ 4.351931] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.352819] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.364158] i40e 0000:02:00.1 eth1: renamed from rename5
[ 4.370154] [drm] Initialized drm 1.1.0 20060810
[ 4.374797] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.381228] alg: No test for crc32 (crc32-pclmul)
[ 4.395990] [TTM] Zone kernel: Available graphics memory: 16494382
kiB
[ 4.396626] i40e 0000:02:00.0 eth0: renamed from rename3
[ 4.407813] [TTM] Zone dma32: Available graphics memory: 2097152
kiB
[ 4.414324] [TTM] Initializing pool allocator
[ 4.418678] [TTM] Initializing DMA pool allocator
[ 4.425605] intel_rapl: Found RAPL domain package
[ 4.430215] intel_rapl: Found RAPL domain core
[ 4.446166] fbcon: mgadrmfb (fb0) is primary device
[ 4.489833] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c, prod_id:
0x0624, dev_id: 0x20)
[ 4.489843] ipmi_si 00:0a: IPMI kcs interface initialized
[ 4.604074] Console: switching to colour frame buffer device 128x48
[ 4.698245] mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer device
[ 4.704491] mgag200 0000:06:03.0: registered panic notifier
[ 4.733133] [drm] Initialized mgag200 1.0.0 20110418 for 0000:06:03.0
on minor 0
[ 4.975874] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1
across:3905532k SSFS
[ 5.002394] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.044749] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 5.077354] loop: module loaded
[ 5.087636] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 5.101990] nf_conntrack version 0.5.0 (17374463 buckets, 138995704
max)
[ 5.108653] nf_conntrack: falling back to vmalloc.
[ 5.735510] random: dd urandom read with 92 bits of entropy available
[ 5.927034] bond0: Setting xmit hash policy to layer3+4 (1)
[ 5.927105] bond0: Setting MII monitoring interval to 100
[ 5.963685] bond0: Setting LACP rate to slow (0)
[ 6.119830] bond0: Adding slave eth0
[ 6.119841] i40e 0000:02:00.0 eth0: already using mac address
3c:fd:fe:9c:56:b8
[ 6.123689] i40e 0000:02:00.0 eth0: NIC Link is Up 10 Gbps Full
Duplex, Flow Control: None
[ 6.123746] bond0: Enslaving eth0 as a backup interface with an up
link
[ 6.126208] bond0: Adding slave eth1
[ 6.126212] i40e 0000:02:00.1 eth1: set new mac address
3c:fd:fe:9c:56:b8
[ 6.135693] i40e 0000:02:00.1 eth1: NIC Link is Up 10 Gbps Full
Duplex, Flow Control: None
[ 6.135756] bond0: Enslaving eth1 as a backup interface with an up
link
[ 7.145905] random: nonblocking pool is initialized
[ 12.460991] Process accounting resumed
[ 12.918920] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 13.021814] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 13.279044] nf_conntrack: falling back to vmalloc.
[ 13.323161] ip_tables: (C) 2000-2006 Netfilter Core Team

On 2015-08-27 16:43, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Thursday, August 27, 2015 4:54 AM
>> To: Fujinaka, Todd
>> Cc: Rose, Gregory V; e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> Well, that's it for now anyway...
>>
>> ...
>> Power cycle is required to complete the update process.
>> Tool execution completed with the following status: All operations
>> completed successfully
>>
>> The card doesn't even appear in "lspci" anymore... :/ I used a Win7 to
>> flash it since a co-worker already broke one when flashing via Linux.
>> No
>> idea how to unbrick it.
>
> Christian,
>
> I'm very sorry to hear that. It is pretty rare for this sort of thing
> to happen but not unheard of. Please contact ***@intel.com to get
> help replacing the part.
>
> - Greg
>
>>
>>
>> On 2015-08-27 01:25, Fujinaka, Todd wrote:
>> > Attachments don't work on this mailing list (though they may have
>> > gotten to Greg). Please file a bug on e1000.sourceforge.net and attach
>> > the files there.
>> >
>> > Todd Fujinaka
>> > Software Application Engineer
>> > Networking Division (ND)
>> > Intel Corporation
>> > ***@intel.com
>> > (503) 712-4565
>> >
>> > -----Original Message-----
>> > From: Christian Ruppert [mailto:***@qasl.de]
>> > Sent: Wednesday, August 26, 2015 10:24 AM
>> > To: Rose, Gregory V
>> > Cc: e1000-***@lists.sf.net
>> > Subject: Re: [E1000-devel] X710 / i40e interface resets
>> >
>> > On 2015-08-26 01:19, Rose, Gregory V wrote:
>> >>> -----Original Message-----
>> >>> From: Christian Ruppert [mailto:***@qasl.de]
>> >>> Sent: Friday, August 21, 2015 7:06 AM
>> >>> To: Rose, Gregory V
>> >>> Cc: e1000-***@lists.sf.net
>> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>>
>> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>> >>> >> -----Original Message-----
>> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>> >>> >> To: Rose, Gregory V
>> >>> >> Cc: e1000-***@lists.sf.net
>> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>> >>
>> >>
>> >> [snip]
>> >>
>> >>> > I've been told that the Tx driver issue detected message is due to
>> >>> > a MDD (Malicious Driver Detection) event. We need to find out what
>> >>> > is causing that so if you could please send me your system log and
>> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I can
>> >>> > see what might be occurring. If not then we'll have to debug
>> further.
>> >>>
>> >>> See the initial Mail for ethtool -k and so on. Also:
>> >>> # ethtool eth0
>> >>> Settings for eth0:
>> >>> Supported ports: [ FIBRE ]
>> >>> Supported link modes: 1000baseT/Full
>> >>> 10000baseT/Full
>> >>> Supported pause frame use: Symmetric
>> >>> Supports auto-negotiation: No
>> >>> Advertised link modes: 1000baseT/Full
>> >>> 10000baseT/Full
>> >>> Advertised pause frame use: No
>> >>> Advertised auto-negotiation: No
>> >>> Speed: 10000Mb/s
>> >>> Duplex: Full
>> >>> Port: FIBRE
>> >>> PHYAD: 0
>> >>> Transceiver: external
>> >>> Auto-negotiation: off
>> >>> Supports Wake-on: d
>> >>> Wake-on: d
>> >>> Current message level: 0x0000000f (15)
>> >>> drv probe link timer
>> >>> Link detected: yes
>> >>> # ethtool -i eth0
>> >>> driver: i40e
>> >>> version: 1.2.48
>> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>> >>> bus-info: 0000:02:00.0
>> >>> supports-statistics: yes
>> >>> supports-test: yes
>> >>> supports-eeprom-access: yes
>> >>> supports-register-dump: yes
>> >>> supports-priv-flags: yes
>> >>
>> >> I also need the output of 'dmesg' - and I need to figure out how to
>> >> determine what specific MDD event is occurring. I'll get back to you
>> >> with instructions on how to do that when I get the system log from
>> >> you.
>> >
>> > See the attached file. It's a dmesg from boot + some minutes.
>> > I'll upgrade the card's firmware tomorrow I guess and try out the new
>> > drivers btw.
>> >
>> >>
>> >> Thanks,
>> >>
>> >> - Greg
>> >
>> > --
>> > Regards,
>> > Christian Ruppert
>>
>> --
>> Regards,
>> Christian Ruppert

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Christian Ruppert
2015-09-28 14:53:44 UTC
Permalink
And there we go:

[77571.409182] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[77572.245943] bond0: link status up again after 0 ms for interface eth1
[94412.738896] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[94413.569379] bond0: link status up again after 0 ms for interface eth1
[94516.443592] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[94516.718341] bond0: link status up again after 0 ms for interface eth1
[96850.580882] i40e 0000:02:00.0: TX driver issue detected, PF reset
issued
[96851.036998] bond0: link status up again after 0 ms for interface eth0
[96939.474122] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[96940.217799] bond0: link status up again after 0 ms for interface eth1
[96945.007365] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[96945.225029] bond0: link status up again after 0 ms for interface eth1
[96965.362669] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[96966.255350] bond0: link status up again after 0 ms for interface eth1
[99844.991331] i40e 0000:02:00.0: TX driver issue detected, PF reset
issued
[99845.360288] bond0: link status up again after 0 ms for interface eth0
[159908.054220] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[159909.165679] bond0: link status up again after 0 ms for interface
eth1
[329531.138706] i40e 0000:02:00.1: TX driver issue detected, PF reset
issued
[329532.167421] bond0: link status up again after 0 ms for interface
eth1

On 2015-09-25 16:19, Christian Ruppert wrote:
> Hi,
>
> the card came back and I had to flash it again but it worked perfectly
> fine this time :)
> So I setup a new Kernel (3.18.20) and the most recent i40e driver
> (1.3.39.1) and removed the previous workaround to disable ntuples on
> both interfaces. So basically a vanilla setup.
> That host is up for several hours no and there was no spam so far and
> only one reset yet:
> Sep 25 12:38:54 somehost kernel: [77571.409182] i40e 0000:02:00.1: TX
> driver issue detected, PF reset issued
> Sep 25 12:38:55 somehost kernel: [77572.245943] bond0: link status up
> again after 0 ms for interface eth1
>
> and here's the requested dmesg again:
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.18.20 (***@somehost) (gcc version 4.7.2
> (Debian 4.7.2-5) ) #1 SMP Wed Aug 26 14:25:15 CEST 2015
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000becc8fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000becc9000-0x00000000bed0bfff]
> ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bed0c000-0x00000000ce491fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000ce492000-0x00000000ce534fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ce535000-0x00000000ce5c6fff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000ce5c7000-0x00000000ce68bfff]
> ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000ce68c000-0x00000000cf7fefff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff]
> usable
> [ 0.000000] console [earlyser0] enabled
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2
> 02/20/2015
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CBFFF write-protect
> [ 0.000000] CC000-E7FFF uncachable
> [ 0.000000] E8000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask 800000000 write-back
> [ 0.000000] 1 base 800000000 mask FE0000000 write-back
> [ 0.000000] 2 base 820000000 mask FF0000000 write-back
> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
> [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
> reserved
> [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf]
> mapped at [ffff8800000fd7b0]
> [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size
> 24576
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
> [ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
> [ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
> [ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M
> [ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
> [ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff]
> [ 0.000000] [mem 0x800000000-0x82bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbecc8fff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0xbebfffff] page 2M
> [ 0.000000] [mem 0xbec00000-0xbecc8fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbed0c000-0xce491fff]
> [ 0.000000] [mem 0xbed0c000-0xbedfffff] page 4k
> [ 0.000000] [mem 0xbee00000-0xce3fffff] page 2M
> [ 0.000000] [mem 0xce400000-0xce491fff] page 4k
> [ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
> [ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xce535000-0xce5c6fff]
> [ 0.000000] [mem 0xce535000-0xce5c6fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
> [ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
> [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
> [ 0.000000] RAMDISK: [mem 0x360c0000-0x37057fff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
> [ 0.000000] ACPI: XSDT 0x00000000CE64F088 00008C (v01 SUPERM
> SMCI--MB 00000001 AMI 00010013)
> [ 0.000000] ACPI: FACP 0x00000000CE65A210 00010C (v05 SUPERM
> SMCI--MB 00000001 AMI 00010013)
> [ 0.000000] ACPI: DSDT 0x00000000CE64F1A8 00B068 (v02 SUPERM
> SMCI--MB 00000000 INTL 20051117)
> [ 0.000000] ACPI: FACS 0x00000000CE68A080 000040
> [ 0.000000] ACPI: APIC 0x00000000CE65A320 000092 (v03 SUPERM
> SMCI--MB 00000001 AMI 00010013)
> [ 0.000000] ACPI: FPDT 0x00000000CE65A3B8 000044 (v01 SUPERM
> SMCI--MB 00000001 AMI 00010013)
> [ 0.000000] ACPI: MCFG 0x00000000CE65A400 00003C (v01 SUPERM
> SMCI--MB 00000001 MSFT 00000097)
> [ 0.000000] ACPI: HPET 0x00000000CE65A440 000038 (v01 SUPERM
> SMCI--MB 00000001 AMI. 00000005)
> [ 0.000000] ACPI: SSDT 0x00000000CE65A478 000397 (v01 SataRe
> SataTabl 00001000 INTL 20091112)
> [ 0.000000] ACPI: SPMI 0x00000000CE65A810 000040 (v05 A M I
> OEMSPMI 00000000 AMI. 00000000)
> [ 0.000000] ACPI: SSDT 0x00000000CE65A850 0009A4 (v01 PmRef
> Cpu0Ist 00003000 INTL 20051117)
> [ 0.000000] ACPI: SSDT 0x00000000CE65B1F8 000B18 (v01 PmRef CpuPm
> 00003000 INTL 20051117)
> [ 0.000000] ACPI: EINJ 0x00000000CE65BD10 000130 (v01 AMI AMI
> EINJ 00000000 00000000)
> [ 0.000000] ACPI: ERST 0x00000000CE65BE40 000210 (v01 AMIER AMI
> ERST 00000000 00000000)
> [ 0.000000] ACPI: HEST 0x00000000CE65C050 0000A8 (v01 AMI AMI
> HEST 00000000 00000000)
> [ 0.000000] ACPI: BERT 0x00000000CE65C0F8 000030 (v01 AMI AMI
> BERT 00000000 00000000)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem
> 0x0000000000000000-0x000000082fffffff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x82ffdc000-0x82ffdffff]
> [ 0.000000] [ffffea0000000000-ffffea001cbfffff] PMD ->
> [ffff88080f600000-ffff88082b7fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x82fffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x00098fff]
> [ 0.000000] node 0: [mem 0x00100000-0xbecc8fff]
> [ 0.000000] node 0: [mem 0xbed0c000-0xce491fff]
> [ 0.000000] node 0: [mem 0xce535000-0xce5c6fff]
> [ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
> [ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x82fffffff]
> [ 0.000000] On node 0 totalpages: 8381562
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3992 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 11498 pages used for memmap
> [ 0.000000] DMA32 zone: 840930 pages, LIFO batch:31
> [ 0.000000] Normal zone: 103040 pages used for memmap
> [ 0.000000] Normal zone: 7536640 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
> GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x00000000-0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x00099000-0x00099fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x0009a000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xbecc9000-0xbed0bfff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xce492000-0xce534fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xce5c7000-0xce68bfff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xce68c000-0xcf7fefff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xcf800000-0xdfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xe0000000-0xefffffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xf0000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfec01000-0xfecfffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed00000-0xfed03fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed04000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfee01000-0xfeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xff000000-0xffffffff]
> [ 0.000000] e820: [mem 0xcf800000-0xdfffffff] available for PCI
> devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
> nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s80960
> r8192 d29632 u262144
> [ 0.000000] pcpu-alloc: s80960 r8192 d29632 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 8266947
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
> [ 0.000000] Intel-IOMMU: disabled
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
> standard form
> [ 0.000000] AGP: Checking aperture...
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
> bailing!
> [ 0.000000] Memory: 32970712K/33526248K available (5512K kernel
> code, 966K rwdata, 1832K rodata, 1228K init, 852K bss, 555536K
> reserved)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
> nr_cpu_ids=8
> [ 0.000000] NR_IRQS:33024 nr_irqs:488 0
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 134217728 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration failed
> [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
> [ 0.000000] tsc: Detected 3499.669 MHz processor
> [ 0.000025] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 6999.33 BogoMIPS (lpj=13998676)
> [ 0.010617] pid_max: default: 32768 minimum: 301
> [ 0.015230] ACPI: Core revision 20140926
> [ 0.024681] ACPI: All ACPI Tables successfully acquired
> [ 0.039606] Security Framework initialized
> [ 0.043611] AppArmor: AppArmor disabled by boot time parameter
> [ 0.049421] Yama: becoming mindful.
> [ 0.054266] Dentry cache hash table entries: 4194304 (order: 13,
> 33554432 bytes)
> [ 0.067119] Inode-cache hash table entries: 2097152 (order: 12,
> 16777216 bytes)
> [ 0.076825] Mount-cache hash table entries: 65536 (order: 7, 524288
> bytes)
> [ 0.083636] Mountpoint-cache hash table entries: 65536 (order: 7,
> 524288 bytes)
> [ 0.091133] Initializing cgroup subsys memory
> [ 0.095401] Initializing cgroup subsys devices
> [ 0.099824] Initializing cgroup subsys freezer
> [ 0.104249] Initializing cgroup subsys net_cls
> [ 0.108676] Initializing cgroup subsys blkio
> [ 0.112929] Initializing cgroup subsys perf_event
> [ 0.117615] Initializing cgroup subsys net_prio
> [ 0.122145] CPU: Physical Processor ID: 0
> [ 0.126120] CPU: Processor Core ID: 0
> [ 0.129769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.129769] ENERGY_PERF_BIAS: View and update with
> x86_energy_perf_policy(8)
> [ 0.143037] mce: CPU supports 9 MCE banks
> [ 0.146959] CPU0: Thermal monitoring enabled (TM1)
> [ 0.151728] process: using mwait in idle threads
> [ 0.156328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
> [ 0.156328] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
> [ 0.168125] Freeing SMP alternatives memory: 20K (ffffffff81a26000
> - ffffffff81a2b000)
> [ 0.176733] ftrace: allocating 22083 entries in 87 pages
> [ 0.197324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.242968] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 V2 @
> 3.50GHz (fam: 06, model: 3a, stepping: 09)
> [ 0.252247] TSC deadline timer enabled
> [ 0.252264] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge
> events, full-width counters, Intel PMU driver.
> [ 0.262484] ... version: 3
> [ 0.266477] ... bit width: 48
> [ 0.270555] ... generic registers: 4
> [ 0.274548] ... value mask: 0000ffffffffffff
> [ 0.279843] ... max period: 0000ffffffffffff
> [ 0.285137] ... fixed-purpose events: 3
> [ 0.289130] ... event mask: 000000070000000f
> [ 0.295409] x86: Booting SMP configuration:
> [ 0.299494] .... node #0, CPUs: #1
> [ 0.316534] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
> [ 0.324669] #2 #3 #4 #5 #6 #7
> [ 0.407240] x86: Booted up 1 node, 8 CPUs
> [ 0.411319] smpboot: Total of 8 processors activated (55994.70
> BogoMIPS)
> [ 0.424047] devtmpfs: initialized
> [ 0.430926] PM: Registering ACPI NVS region [mem
> 0xbecc9000-0xbed0bfff] (274432 bytes)
> [ 0.438777] PM: Registering ACPI NVS region [mem
> 0xce5c7000-0xce68bfff] (806912 bytes)
> [ 0.447304] pinctrl core: initialized pinctrl subsystem
> [ 0.452519] NET: Registered protocol family 16
> [ 0.468890] cpuidle: using governor ladder
> [ 0.488929] cpuidle: using governor menu
> [ 0.492803] ACPI FADT declares the system doesn't support PCIe
> ASPM, so disable it
> [ 0.500309] ACPI: bus type PCI registered
> [ 0.504301] acpiphp: ACPI Hot Plug PCI Controller Driver version:
> 0.5
> [ 0.510784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.520010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
> E820
> [ 0.526980] PCI: Using configuration type 1 for base access
> [ 0.544821] ACPI: Added _OSI(Module Device)
> [ 0.548905] ACPI: Added _OSI(Processor Device)
> [ 0.553330] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.558017] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.565243] ACPI: Executed 1 blocks of module-level executable AML
> code
> [ 0.739624] \_SB_:_OSC invalid UUID
> [ 0.739625] _OSC request data:1 1f
> [ 0.739811] ACPI: Dynamic OEM Table Load:
> [ 0.743707] ACPI: SSDT 0xFFFF880807B5C000 00083B (v01 PmRef
> Cpu0Cst 00003001 INTL 20051117)
> [ 0.764280] ACPI: Dynamic OEM Table Load:
> [ 0.768173] ACPI: SSDT 0xFFFF880807049C00 000303 (v01 PmRef ApIst
> 00003000 INTL 20051117)
> [ 0.788649] ACPI: Dynamic OEM Table Load:
> [ 0.792543] ACPI: SSDT 0xFFFF880807007C00 000119 (v01 PmRef ApCst
> 00003000 INTL 20051117)
> [ 0.813761] ACPI: Interpreter enabled
> [ 0.817329] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S2_] (20140926/hwxface-580)
> [ 0.826523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> State [\_S3_] (20140926/hwxface-580)
> [ 0.835727] ACPI: (supports S0 S1 S4 S5)
> [ 0.839628] ACPI: Using IOAPIC for interrupt routing
> [ 0.844615] HEST: Table parsing has been initialized.
> [ 0.849610] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
> [ 0.863689] ACPI: Power Resource [FN00] (off)
> [ 0.868006] ACPI: Power Resource [FN01] (off)
> [ 0.872344] ACPI: Power Resource [FN02] (off)
> [ 0.876682] ACPI: Power Resource [FN03] (off)
> [ 0.881022] ACPI: Power Resource [FN04] (off)
> [ 0.885681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
> [ 0.891767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
> ClockPM Segments MSI]
> [ 0.900002] acpi PNP0A08:00: _OSC: platform does not support
> [PCIeHotplug PME]
> [ 0.907216] acpi PNP0A08:00: _OSC: OS now controls [AER
> PCIeCapability]
> [ 0.914173] PCI host bridge to bus 0000:00
> [ 0.918169] pci_bus 0000:00: root bus resource [bus 00-fe]
> [ 0.923636] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.929798] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.935959] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff]
> [ 0.942817] pci_bus 0000:00: root bus resource [mem
> 0x000cc000-0x000cffff]
> [ 0.949673] pci_bus 0000:00: root bus resource [mem
> 0x000d0000-0x000d3fff]
> [ 0.956530] pci_bus 0000:00: root bus resource [mem
> 0x000d4000-0x000d7fff]
> [ 0.963386] pci_bus 0000:00: root bus resource [mem
> 0x000d8000-0x000dbfff]
> [ 0.970243] pci_bus 0000:00: root bus resource [mem
> 0x000dc000-0x000dffff]
> [ 0.977101] pci_bus 0000:00: root bus resource [mem
> 0x000e0000-0x000e3fff]
> [ 0.983957] pci_bus 0000:00: root bus resource [mem
> 0x000e4000-0x000e7fff]
> [ 0.990814] pci_bus 0000:00: root bus resource [mem
> 0xd0000000-0xfeafffff]
> [ 0.997674] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
> [ 0.997751] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
> [ 0.997831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.997870] pci 0000:00:01.0: System wakeup disabled by ACPI
> [ 1.003450] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
> [ 1.003473] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
> [ 1.003502] pci 0000:00:01.1: System wakeup disabled by ACPI
> [ 1.009121] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
> [ 1.009138] pci 0000:00:19.0: reg 0x10: [mem 0xdfb00000-0xdfb1ffff]
> [ 1.009145] pci 0000:00:19.0: reg 0x14: [mem 0xdfb25000-0xdfb25fff]
> [ 1.009153] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
> [ 1.009212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [ 1.009246] pci 0000:00:19.0: System wakeup disabled by ACPI
> [ 1.014835] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> [ 1.014854] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb24000-0xdfb243ff]
> [ 1.014938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 1.014983] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 1.020571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> [ 1.020648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 1.020686] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 1.026274] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
> [ 1.026351] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 1.026388] pci 0000:00:1c.4: System wakeup disabled by ACPI
> [ 1.031981] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> [ 1.032000] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb23000-0xdfb233ff]
> [ 1.032084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 1.032129] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 1.037718] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> [ 1.037791] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 1.043379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
> [ 1.043532] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
> [ 1.043549] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
> [ 1.043556] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
> [ 1.043563] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
> [ 1.043570] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
> [ 1.043577] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
> [ 1.043584] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb22000-0xdfb227ff]
> [ 1.043625] pci 0000:00:1f.2: PME# supported from D3hot
> [ 1.043684] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> [ 1.043697] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb21000-0xdfb210ff
> 64bit]
> [ 1.043716] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
> [ 1.043832] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 1.048735] pci 0000:02:00.0: [8086:1572] type 00 class 0x020000
> [ 1.048745] pci 0000:02:00.0: reg 0x10: [mem 0xdd800000-0xddffffff
> 64bit pref]
> [ 1.048755] pci 0000:02:00.0: reg 0x1c: [mem 0xde808000-0xde80ffff
> 64bit pref]
> [ 1.048764] pci 0000:02:00.0: reg 0x30: [mem 0xdfa80000-0xdfafffff
> pref]
> [ 1.048800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 1.048818] pci 0000:02:00.0: reg 0x184: [mem 0xde400000-0xde40ffff
> 64bit pref]
> [ 1.048827] pci 0000:02:00.0: reg 0x190: [mem 0xde910000-0xde913fff
> 64bit pref]
> [ 1.048862] pci 0000:02:00.1: [8086:1572] type 00 class 0x020000
> [ 1.048872] pci 0000:02:00.1: reg 0x10: [mem 0xdd000000-0xdd7fffff
> 64bit pref]
> [ 1.048882] pci 0000:02:00.1: reg 0x1c: [mem 0xde800000-0xde807fff
> 64bit pref]
> [ 1.048891] pci 0000:02:00.1: reg 0x30: [mem 0xdfa00000-0xdfa7ffff
> pref]
> [ 1.048925] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
> [ 1.048942] pci 0000:02:00.1: reg 0x184: [mem 0xde000000-0xde00ffff
> 64bit pref]
> [ 1.048951] pci 0000:02:00.1: reg 0x190: [mem 0xde810000-0xde813fff
> 64bit pref]
> [ 1.056725] pci 0000:00:01.1: PCI bridge to [bus 02-03]
> [ 1.061856] pci 0000:00:01.1: bridge window [mem
> 0xdfa00000-0xdfafffff]
> [ 1.061858] pci 0000:00:01.1: bridge window [mem
> 0xdd000000-0xdeafffff 64bit pref]
> [ 1.061915] pci 0000:00:1c.0: PCI bridge to [bus 04]
> [ 1.066903] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
> [ 1.066942] pci 0000:05:00.0: reg 0x10: [mem 0xdf900000-0xdf91ffff]
> [ 1.066987] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
> [ 1.067010] pci 0000:05:00.0: reg 0x1c: [mem 0xdf920000-0xdf923fff]
> [ 1.067239] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
> [ 1.067289] pci 0000:05:00.0: System wakeup disabled by ACPI
> [ 1.080881] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [ 1.085759] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
> [ 1.085762] pci 0000:00:1c.4: bridge window [mem
> 0xdf900000-0xdf9fffff]
> [ 1.085807] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
> [ 1.085822] pci 0000:06:03.0: reg 0x10: [mem 0xdc000000-0xdcffffff
> pref]
> [ 1.085831] pci 0000:06:03.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
> [ 1.085839] pci 0000:06:03.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
> [ 1.085948] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive
> decode)
> [ 1.092645] pci 0000:00:1e.0: bridge window [mem
> 0xdf000000-0xdf8fffff]
> [ 1.092650] pci 0000:00:1e.0: bridge window [mem
> 0xdc000000-0xdcffffff 64bit pref]
> [ 1.092651] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
> (subtractive decode)
> [ 1.092652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
> (subtractive decode)
> [ 1.092653] pci 0000:00:1e.0: bridge window [mem
> 0x000a0000-0x000bffff] (subtractive decode)
> [ 1.092655] pci 0000:00:1e.0: bridge window [mem
> 0x000cc000-0x000cffff] (subtractive decode)
> [ 1.092656] pci 0000:00:1e.0: bridge window [mem
> 0x000d0000-0x000d3fff] (subtractive decode)
> [ 1.092657] pci 0000:00:1e.0: bridge window [mem
> 0x000d4000-0x000d7fff] (subtractive decode)
> [ 1.092658] pci 0000:00:1e.0: bridge window [mem
> 0x000d8000-0x000dbfff] (subtractive decode)
> [ 1.092659] pci 0000:00:1e.0: bridge window [mem
> 0x000dc000-0x000dffff] (subtractive decode)
> [ 1.092660] pci 0000:00:1e.0: bridge window [mem
> 0x000e0000-0x000e3fff] (subtractive decode)
> [ 1.092661] pci 0000:00:1e.0: bridge window [mem
> 0x000e4000-0x000e7fff] (subtractive decode)
> [ 1.092662] pci 0000:00:1e.0: bridge window [mem
> 0xd0000000-0xfeafffff] (subtractive decode)
> [ 1.092690] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
> unsupported)
> [ 1.100314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
> 14 15)
> [ 1.107107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12
> 14 15)
> [ 1.113962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12
> 14 15)
> [ 1.120818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12
> 14 15)
> [ 1.127675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12
> 14 15)
> [ 1.134531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 1.142515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 1.150505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12
> 14 15)
> [ 1.157484] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 1.162221] vgaarb: setting as boot device: PCI:0000:06:03.0
> [ 1.167794] vgaarb: device added:
> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
> [ 1.175867] vgaarb: loaded
> [ 1.178556] vgaarb: bridge control possible 0000:06:03.0
> [ 1.183909] PCI: Using ACPI for IRQ routing
> [ 1.193792] PCI: pci_cache_line_size set to 64 bytes
> [ 1.193833] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
> [ 1.193834] e820: reserve RAM buffer [mem 0xbecc9000-0xbfffffff]
> [ 1.193835] e820: reserve RAM buffer [mem 0xce492000-0xcfffffff]
> [ 1.193836] e820: reserve RAM buffer [mem 0xce5c7000-0xcfffffff]
> [ 1.193837] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
> [ 1.193935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 1.199994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 1.207831] Switched to clocksource hpet
> [ 1.215086] pnp: PnP ACPI init
> [ 1.218096] system 00:00: [mem 0xfed40000-0xfed44fff] has been
> reserved
> [ 1.224641] system 00:00: Plug and Play ACPI device, IDs PNP0c01
> (active)
> [ 1.224688] system 00:01: [io 0x0680-0x069f] has been reserved
> [ 1.230542] system 00:01: [io 0x1000-0x100f] has been reserved
> [ 1.236442] system 00:01: [io 0xffff] has been reserved
> [ 1.241736] system 00:01: [io 0xffff] has been reserved
> [ 1.247031] system 00:01: [io 0x0400-0x0453] could not be reserved
> [ 1.253282] system 00:01: [io 0x0458-0x047f] has been reserved
> [ 1.259182] system 00:01: [io 0x0500-0x057f] has been reserved
> [ 1.265084] system 00:01: [io 0x164e-0x164f] has been reserved
> [ 1.270987] system 00:01: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 1.271008] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
> (active)
> [ 1.271039] system 00:03: [io 0x0454-0x0457] has been reserved
> [ 1.276891] system 00:03: Plug and Play ACPI device, IDs INT3f0d
> PNP0c02 (active)
> [ 1.276924] system 00:04: [io 0x04d0-0x04d1] has been reserved
> [ 1.282792] system 00:04: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 1.282868] system 00:05: [io 0x0a00-0x0a1f] has been reserved
> [ 1.288693] system 00:05: [io 0x0a30-0x0a3f] has been reserved
> [ 1.294594] system 00:05: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 1.294751] pnp 00:06: [dma 0 disabled]
> [ 1.294780] pnp 00:06: Plug and Play ACPI device, IDs PNP0501
> (active)
> [ 1.294921] pnp 00:07: [dma 0 disabled]
> [ 1.294947] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
> (active)
> [ 1.295019] system 00:08: [io 0x0b00-0x0b7f] has been reserved
> [ 1.300845] system 00:08: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 1.300958] pnp 00:09: [dma 0 disabled]
> [ 1.300985] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
> (active)
> [ 1.301064] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001
> (active)
> [ 1.301198] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been
> reserved
> [ 1.307720] system 00:0b: [mem 0xfed10000-0xfed17fff] has been
> reserved
> [ 1.314314] system 00:0b: [mem 0xfed18000-0xfed18fff] has been
> reserved
> [ 1.320909] system 00:0b: [mem 0xfed19000-0xfed19fff] has been
> reserved
> [ 1.327506] system 00:0b: [mem 0xe0000000-0xefffffff] has been
> reserved
> [ 1.334102] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been
> reserved
> [ 1.340701] system 00:0b: [mem 0xfed90000-0xfed93fff] has been
> reserved
> [ 1.347295] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been
> reserved
> [ 1.353892] system 00:0b: [mem 0xff000000-0xffffffff] has been
> reserved
> [ 1.360488] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
> reserved
> [ 1.367430] system 00:0b: [mem 0xd0000000-0xd0000fff] has been
> reserved
> [ 1.374027] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 1.374113] pnp: PnP ACPI: found 12 devices
> [ 1.384167] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 1.389053] pci 0000:00:01.1: PCI bridge to [bus 02-03]
> [ 1.394250] pci 0000:00:01.1: bridge window [mem
> 0xdfa00000-0xdfafffff]
> [ 1.401020] pci 0000:00:01.1: bridge window [mem
> 0xdd000000-0xdeafffff 64bit pref]
> [ 1.408745] pci 0000:00:1c.0: PCI bridge to [bus 04]
> [ 1.413701] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [ 1.418641] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
> [ 1.424718] pci 0000:00:1c.4: bridge window [mem
> 0xdf900000-0xdf9fffff]
> [ 1.431489] pci 0000:00:1e.0: PCI bridge to [bus 06]
> [ 1.436435] pci 0000:00:1e.0: bridge window [mem
> 0xdf000000-0xdf8fffff]
> [ 1.443203] pci 0000:00:1e.0: bridge window [mem
> 0xdc000000-0xdcffffff 64bit pref]
> [ 1.450929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 1.450931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 1.450932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.450933] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
> [ 1.450934] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
> [ 1.450935] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
> [ 1.450936] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
> [ 1.450937] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
> [ 1.450938] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff]
> [ 1.450939] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff]
> [ 1.450940] pci_bus 0000:00: resource 14 [mem 0xd0000000-0xfeafffff]
> [ 1.450941] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
> [ 1.450942] pci_bus 0000:02: resource 2 [mem 0xdd000000-0xdeafffff
> 64bit pref]
> [ 1.450943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
> [ 1.450944] pci_bus 0000:05: resource 1 [mem 0xdf900000-0xdf9fffff]
> [ 1.450946] pci_bus 0000:06: resource 1 [mem 0xdf000000-0xdf8fffff]
> [ 1.450947] pci_bus 0000:06: resource 2 [mem 0xdc000000-0xdcffffff
> 64bit pref]
> [ 1.450948] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
> [ 1.450949] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
> [ 1.450950] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.450951] pci_bus 0000:06: resource 7 [mem 0x000cc000-0x000cffff]
> [ 1.450952] pci_bus 0000:06: resource 8 [mem 0x000d0000-0x000d3fff]
> [ 1.450953] pci_bus 0000:06: resource 9 [mem 0x000d4000-0x000d7fff]
> [ 1.450954] pci_bus 0000:06: resource 10 [mem 0x000d8000-0x000dbfff]
> [ 1.450955] pci_bus 0000:06: resource 11 [mem 0x000dc000-0x000dffff]
> [ 1.450956] pci_bus 0000:06: resource 12 [mem 0x000e0000-0x000e3fff]
> [ 1.450957] pci_bus 0000:06: resource 13 [mem 0x000e4000-0x000e7fff]
> [ 1.450958] pci_bus 0000:06: resource 14 [mem 0xd0000000-0xfeafffff]
> [ 1.451014] NET: Registered protocol family 2
> [ 1.455462] TCP established hash table entries: 262144 (order: 9,
> 2097152 bytes)
> [ 1.463005] TCP bind hash table entries: 65536 (order: 8, 1048576
> bytes)
> [ 1.469713] TCP: Hash tables configured (established 262144 bind
> 65536)
> [ 1.476246] TCP: reno registered
> [ 1.479464] UDP hash table entries: 16384 (order: 7, 524288 bytes)
> [ 1.485680] UDP-Lite hash table entries: 16384 (order: 7, 524288
> bytes)
> [ 1.492306] NET: Registered protocol family 1
> [ 1.496818] PCI: CLS mismatch (64 != 32), using 64 bytes
> [ 1.496823] pci 0000:06:03.0: Video device with shadowed ROM
> [ 1.496853] Unpacking initramfs...
> [ 1.690454] Freeing initrd memory: 15968K (ffff8800360c0000 -
> ffff880037058000)
> [ 1.697700] PCI-DMA: Using software bounce buffering for IO
> (SWIOTLB)
> [ 1.704118] software IO TLB [mem 0xca492000-0xce492000] (64MB)
> mapped at [ffff8800ca492000-ffff8800ce491fff]
> [ 1.714164] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
> [ 1.724674] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.730426] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.736250] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.750730] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.756546] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.762360] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.768179] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.773991] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
> [ 1.779835] microcode: Microcode Update Driver: v2.00
> <***@aivazian.fsnet.co.uk>, Peter Oruba
> [ 1.788826] futex hash table entries: 2048 (order: 5, 131072 bytes)
> [ 1.795033] audit: initializing netlink subsys (disabled)
> [ 1.800388] audit: type=2000 audit(1443100076.548:1): initialized
> [ 1.806664] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.812933] zpool: loaded
> [ 1.815517] zbud: loaded
> [ 1.818158] VFS: Disk quotas dquot_6.5.2
> [ 1.821997] Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [ 1.828445] msgmni has been set to 32768
> [ 1.832595] alg: No test for stdrng (krng)
> [ 1.836625] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 252)
> [ 1.844014] io scheduler noop registered
> [ 1.847878] io scheduler deadline registered
> [ 1.852131] io scheduler cfq registered (default)
> [ 1.856959] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
> [ 1.857070] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
> [ 1.857283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.862775] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> [ 1.869391] intel_idle: MWAIT substates: 0x1120
> [ 1.869392] intel_idle: v0.4 model 0x3A
> [ 1.869393] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 1.869628] ERST: Error Record Serialization Table (ERST) support
> is initialized.
> [ 1.877034] pstore: Registered erst as persistent store backend
> [ 1.882975] GHES: APEI firmware first mode is enabled by WHEA _OSC.
> [ 1.889229] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.915898] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
> is a 16550A
> [ 1.943574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
> is a 16550A
> [ 1.971232] 00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud =
> 115200) is a 16550A
> [ 1.978753] Linux agpgart interface v0.103
> [ 1.982831] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> [ 1.992701] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.997575] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 2.002720] mousedev: PS/2 mouse device common for all mice
> [ 2.008232] rtc_cmos 00:02: RTC can wake from S4
> [ 2.012908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 2.018943] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
> nvram, hpet irqs
> [ 2.026564] ledtrig-cpu: registered to indicate activity on CPUs
> [ 2.032717] AMD IOMMUv2 driver by Joerg Roedel
> <***@amd.com>
> [ 2.039059] AMD IOMMUv2 functionality not available on this system
> [ 2.045283] TCP: cubic registered
> [ 2.048521] IPv6: Loaded, but administratively disabled, reboot
> required to enable
> [ 2.056071] mip6: Mobile IPv6
> [ 2.059020] mip6: mip6_init: can't add xfrm type(destopt)
> [ 2.064404] NET: Registered protocol family 17
> [ 2.068836] mpls_gso: MPLS GSO support
> [ 2.072972] registered taskstats version 1
> [ 2.077499] rtc_cmos 00:02: setting system clock to 2015-09-24
> 13:07:57 UTC (1443100077)
> [ 2.085560] PM: Hibernation image not present or could not be
> loaded.
> [ 2.086094] Freeing unused kernel memory: 1228K (ffffffff818f3000 -
> ffffffff81a26000)
> [ 2.093851] Write protecting the kernel read-only data: 8192k
> [ 2.100532] Freeing unused kernel memory: 620K (ffff880001565000 -
> ffff880001600000)
> [ 2.108556] Freeing unused kernel memory: 216K (ffff8800017ca000 -
> ffff880001800000)
> [ 2.123393] udevd[94]: starting version 175
> [ 2.131920] pps_core: LinuxPPS API ver. 1 registered
> [ 2.136823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <***@linux.it>
> [ 2.147106] PTP clock support registered
> [ 2.151071] ACPI: bus type USB registered
> [ 2.155038] usbcore: registered new interface driver usbfs
> [ 2.160469] usbcore: registered new interface driver hub
> [ 2.165787] usbcore: registered new device driver usb
> [ 2.171019] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [ 2.176789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
> [ 2.182928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 2.189595] ehci-pci: EHCI PCI platform driver
> [ 2.194192] i40e: Intel(R) Ethernet Connection XL710 Network Driver
> - version 1.3.39.1
> [ 2.197599] e1000e 0000:00:19.0: Interrupt Throttling Rate
> (ints/sec) set to dynamic conservative mode
> [ 2.197641] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
> [ 2.198073] thermal LNXTHERM:00: registered as thermal_zone0
> [ 2.198073] ACPI: Thermal Zone [TZ00] (28 C)
> [ 2.198216] thermal LNXTHERM:01: registered as thermal_zone1
> [ 2.198216] ACPI: Thermal Zone [TZ01] (30 C)
> [ 2.231104] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
> [ 2.249391] i40e 0000:02:00.0: fw 4.40.35115 api 1.4 nvm 4.53
> 0x80001dc0 1.123.0
> [ 2.256998] SCSI subsystem initialized
> [ 2.261957] libata version 3.00 loaded.
> [ 2.453377] e1000e 0000:00:19.0 eth0: registered PHC clock
> [ 2.458796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width
> x1) 00:25:90:a8:02:51
> [ 2.466693] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
> Connection
> [ 2.473600] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
> FFFFFF-0FF
> [ 2.480564] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 2.480631] e1000e 0000:05:00.0: Interrupt Throttling Rate
> (ints/sec) set to dynamic conservative mode
> [ 2.480663] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
> [ 2.480665] e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
> [ 2.480667] e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
> [ 2.495076] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
> bus number 1
> [ 2.495874] i40e 0000:02:00.0: MAC address: 3c:fd:fe:9c:56:b8
> [ 2.499857] i40e 0000:02:00.0: SAN MAC: 3c:fd:fe:9c:56:ba
> [ 2.513542] ehci-pci 0000:00:1a.0: debug port 2
> [ 2.514095] i40e 0000:02:00.0: irq 30 for MSI/MSI-X
> [ 2.514098] i40e 0000:02:00.0: irq 31 for MSI/MSI-X
> [ 2.514099] i40e 0000:02:00.0: irq 32 for MSI/MSI-X
> [ 2.514101] i40e 0000:02:00.0: irq 33 for MSI/MSI-X
> [ 2.514103] i40e 0000:02:00.0: irq 34 for MSI/MSI-X
> [ 2.514105] i40e 0000:02:00.0: irq 35 for MSI/MSI-X
> [ 2.514107] i40e 0000:02:00.0: irq 36 for MSI/MSI-X
> [ 2.514108] i40e 0000:02:00.0: irq 37 for MSI/MSI-X
> [ 2.514110] i40e 0000:02:00.0: irq 38 for MSI/MSI-X
> [ 2.514111] i40e 0000:02:00.0: irq 39 for MSI/MSI-X
> [ 2.514113] i40e 0000:02:00.0: irq 40 for MSI/MSI-X
> [ 2.514114] i40e 0000:02:00.0: irq 41 for MSI/MSI-X
> [ 2.514116] i40e 0000:02:00.0: irq 42 for MSI/MSI-X
> [ 2.514118] i40e 0000:02:00.0: irq 43 for MSI/MSI-X
> [ 2.514119] i40e 0000:02:00.0: irq 44 for MSI/MSI-X
> [ 2.514121] i40e 0000:02:00.0: irq 45 for MSI/MSI-X
> [ 2.514122] i40e 0000:02:00.0: irq 46 for MSI/MSI-X
> [ 2.514124] i40e 0000:02:00.0: irq 47 for MSI/MSI-X
> [ 2.521951] ehci-pci 0000:00:1a.0: cache line size of 64 is not
> supported
> [ 2.521964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb24000
> [ 2.537912] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 2.543607] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 2.550333] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.557541] usb usb1: Product: EHCI Host Controller
> [ 2.562399] usb usb1: Manufacturer: Linux 3.18.20 ehci_hcd
> [ 2.568471] usb usb1: SerialNumber: 0000:00:1a.0
> [ 2.573164] hub 1-0:1.0: USB hub found
> [ 2.576818] hub 1-0:1.0: 2 ports detected
> [ 2.580962] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 2.586095] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
> bus number 2
> [ 2.593480] ehci-pci 0000:00:1d.0: debug port 2
> [ 2.599535] e1000e 0000:05:00.0 eth2: registered PHC clock
> [ 2.601911] ehci-pci 0000:00:1d.0: cache line size of 64 is not
> supported
> [ 2.601922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb23000
> [ 2.610602] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width
> x1) 00:25:90:a8:02:50
> [ 2.613936] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 2.613963] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 2.613964] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.613965] usb usb2: Product: EHCI Host Controller
> [ 2.613965] usb usb2: Manufacturer: Linux 3.18.20 ehci_hcd
> [ 2.613966] usb usb2: SerialNumber: 0000:00:1d.0
> [ 2.614075] hub 2-0:1.0: USB hub found
> [ 2.614078] hub 2-0:1.0: 2 ports detected
> [ 2.614192] ahci 0000:00:1f.2: version 3.0
> [ 2.614340] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
> [ 2.614485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3
> Gbps 0x3f impl SATA mode
> [ 2.614486] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
> part ems apst
> [ 2.626630] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x8
> [ 2.654604] scsi host0: ahci
> [ 2.654992] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66
> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
> [ 2.657763] scsi host1: ahci
> [ 2.658083] scsi host2: ahci
> [ 2.658320] scsi host3: ahci
> [ 2.658546] scsi host4: ahci
> [ 2.658747] scsi host5: ahci
> [ 2.658785] ata1: SATA max UDMA/133 abar ***@0xdfb22000 port
> 0xdfb22100 irq 48
> [ 2.658788] ata2: SATA max UDMA/133 abar ***@0xdfb22000 port
> 0xdfb22180 irq 48
> [ 2.658790] ata3: SATA max UDMA/133 abar ***@0xdfb22000 port
> 0xdfb22200 irq 48
> [ 2.658792] ata4: SATA max UDMA/133 abar ***@0xdfb22000 port
> 0xdfb22280 irq 48
> [ 2.658795] ata5: SATA max UDMA/133 abar ***@0xdfb22000 port
> 0xdfb22300 irq 48
> [ 2.658798] ata6: SATA max UDMA/133 abar ***@0xdfb22000 port
> 0xdfb22380 irq 48
> [ 2.670025] i40e 0000:02:00.1: fw 4.40.35115 api 1.4 nvm 4.53
> 0x80001dc0 1.123.0
> [ 2.714122] tsc: Refined TSC clocksource calibration: 3500.024 MHz
> [ 2.769612] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network
> Connection
> [ 2.776551] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No:
> FFFFFF-0FF
> [ 2.890322] usb 1-1: new high-speed USB device number 2 using
> ehci-pci
> [ 2.916415] i40e 0000:02:00.1: MAC address: 3c:fd:fe:9c:56:b9
> [ 2.926260] i40e 0000:02:00.1: SAN MAC: 3c:fd:fe:9c:56:bb
> [ 2.930381] usb 2-1: new high-speed USB device number 2 using
> ehci-pci
> [ 2.952496] i40e 0000:02:00.1: irq 49 for MSI/MSI-X
> [ 2.952503] i40e 0000:02:00.1: irq 50 for MSI/MSI-X
> [ 2.952508] i40e 0000:02:00.1: irq 51 for MSI/MSI-X
> [ 2.952512] i40e 0000:02:00.1: irq 52 for MSI/MSI-X
> [ 2.952516] i40e 0000:02:00.1: irq 53 for MSI/MSI-X
> [ 2.952520] i40e 0000:02:00.1: irq 54 for MSI/MSI-X
> [ 2.952525] i40e 0000:02:00.1: irq 55 for MSI/MSI-X
> [ 2.952537] i40e 0000:02:00.1: irq 56 for MSI/MSI-X
> [ 2.952539] i40e 0000:02:00.1: irq 57 for MSI/MSI-X
> [ 2.952541] i40e 0000:02:00.1: irq 58 for MSI/MSI-X
> [ 2.952543] i40e 0000:02:00.1: irq 59 for MSI/MSI-X
> [ 2.952545] i40e 0000:02:00.1: irq 60 for MSI/MSI-X
> [ 2.952547] i40e 0000:02:00.1: irq 61 for MSI/MSI-X
> [ 2.952549] i40e 0000:02:00.1: irq 62 for MSI/MSI-X
> [ 2.952550] i40e 0000:02:00.1: irq 63 for MSI/MSI-X
> [ 2.952554] i40e 0000:02:00.1: irq 64 for MSI/MSI-X
> [ 2.952556] i40e 0000:02:00.1: irq 65 for MSI/MSI-X
> [ 2.952558] i40e 0000:02:00.1: irq 66 for MSI/MSI-X
> [ 2.978497] ata5: SATA link down (SStatus 0 SControl 300)
> [ 2.983838] ata6: SATA link down (SStatus 0 SControl 300)
> [ 2.989225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 2.995381] ata4: SATA link down (SStatus 0 SControl 300)
> [ 3.000756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3.007184] ata2: SATA link down (SStatus 0 SControl 300)
> [ 3.012510] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [ 3.012514] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
> LOCK) filtered out
> [ 3.020391] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> CONFIGURATION OVERLAY) filtered out
> [ 3.026954] usb 1-1: New USB device found, idVendor=8087,
> idProduct=0024
> [ 3.026955] usb 1-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 3.027240] hub 1-1:1.0: USB hub found
> [ 3.027332] hub 1-1:1.0: 6 ports detected
> [ 3.050510] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [ 3.050512] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
> LOCK) filtered out
> [ 3.061847] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x8
> [ 3.067012] usb 2-1: New USB device found, idVendor=8087,
> idProduct=0024
> [ 3.067013] usb 2-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 3.067296] hub 2-1:1.0: USB hub found
> [ 3.067384] hub 2-1:1.0: 6 ports detected
> [ 3.090237] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66
> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
> [ 3.103551] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> CONFIGURATION OVERLAY) filtered out
> [ 3.112266] ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10250, max
> UDMA/133
> [ 3.118799] ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth
> 31/32)
> [ 3.125486] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, 1.00, max
> UDMA/133
> [ 3.132254] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [ 3.132259] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
> LOCK) filtered out
> [ 3.140106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> CONFIGURATION OVERLAY) filtered out
> [ 3.148916] ata1.00: configured for UDMA/133
> [ 3.153298] scsi 0:0:0:0: Direct-Access ATA INTEL
> SSDSC2BA20 0250 PQ: 0 ANSI: 5
> [ 3.154140] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [ 3.154142] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
> LOCK) filtered out
> [ 3.154143] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> CONFIGURATION OVERLAY) filtered out
> [ 3.156130] ata3.00: configured for UDMA/133
> [ 3.185352] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N
> 1.00 PQ: 0 ANSI: 5
> [ 3.298953] usb 1-1.2: new full-speed USB device number 3 using
> ehci-pci
> [ 3.323219] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks:
> (200 GB/186 GiB)
> [ 3.330670] sd 0:0:0:0: [sda] Write Protect is off
> [ 3.335418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.335427] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 3.338917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
> dvd-ram cd/rw xa/form2 cdda tray
> [ 3.338918] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 3.339081] sr 2:0:0:0: Attached scsi CD-ROM sr0
> [ 3.358408] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 3.358668] sda: sda1 sda2
> [ 3.358886] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 3.371134] sr 2:0:0:0: Attached scsi generic sg1 type 5
> [ 3.396737] usb 1-1.2: New USB device found, idVendor=0557,
> idProduct=2221
> [ 3.403526] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3.410814] usb 1-1.2: Product: Hermon USB hidmouse Device
> [ 3.416282] usb 1-1.2: Manufacturer: Winbond Electronics Corp
> [ 3.423736] hidraw: raw HID events driver (C) Jiri Kosina
> [ 3.430436] usbcore: registered new interface driver usbhid
> [ 3.435922] usbhid: USB HID core driver
> [ 3.440716] input: Winbond Electronics Corp Hermon USB hidmouse
> Device as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0557:2221.0001/input/input2
> [ 3.455434] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID
> v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on
> usb-0000:00:1a.0-1.2/input0
> [ 3.470147] input: Winbond Electronics Corp Hermon USB hidmouse
> Device as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0557:2221.0002/input/input3
> [ 3.484849] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID
> v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device]
> on usb-0000:00:1a.0-1.2/input1
> [ 3.507384] PM: Starting manual resume from disk
> [ 3.511922] PM: Hibernation image partition 8:1 present
> [ 3.511923] PM: Looking for hibernation image.
> [ 3.512127] PM: Image not found (code -22)
> [ 3.512131] PM: Hibernation image not present or could not be
> loaded.
> [ 3.517313] EXT4-fs (sda2): mounting ext3 file system using the
> ext4 subsystem
> [ 3.529000] EXT4-fs (sda2): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 3.715841] Switched to clocksource tsc
> [ 3.885031] udevd[667]: starting version 175
> [ 4.011695] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
> [ 4.020070] ACPI: Power Button [PWRB]
> [ 4.023703] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
> [ 4.031033] ACPI: Power Button [PWRF]
> [ 4.034781] EDAC MC: Ver: 3.0.0
> [ 4.038626] EDAC MC0: Giving out device to module ie31200_edac
> controller IE31200: DEV 0000:00:00.0 (POLLED)
> [ 4.115904] ipmi message handler version 39.2
> [ 4.121319] IPMI System Interface driver.
> [ 4.126068] ipmi_si: probing via ACPI
> [ 4.129851] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
> [ 4.135777] i40e 0000:02:00.1 rename5: renamed from eth3
> [ 4.141149] ipmi_si: Adding ACPI-specified kcs state machine
> [ 4.147092] ipmi_si: probing via SMBIOS
> [ 4.147160] input: PC Speaker as
> /devices/platform/pcspkr/input/input6
> [ 4.157409] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
> [ 4.163305] ipmi_si: Adding SMBIOS-specified kcs state machine
> duplicate interface
> [ 4.170854] ipmi_si: probing via SPMI
> [ 4.174504] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
> [ 4.177849] i40e 0000:02:00.0 rename3: renamed from eth1
> [ 4.185527] ipmi_si: Adding SPMI-specified kcs state machine
> [ 4.185655] ACPI Warning: SystemIO range
> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
> 0x0000000000000400-0x000000000000047F (\PMIO) (20140926/utaddress-254)
> [ 4.185658] ACPI: If an ACPI driver is available for this device,
> you should use it instead of the native driver
> [ 4.185660] ACPI Warning: SystemIO range
> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
> [ 4.185662] ACPI: If an ACPI driver is available for this device,
> you should use it instead of the native driver
> [ 4.185662] ACPI Warning: SystemIO range
> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
> [ 4.185664] ACPI: If an ACPI driver is available for this device,
> you should use it instead of the native driver
> [ 4.185664] ACPI Warning: SystemIO range
> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
> [ 4.185665] ACPI: If an ACPI driver is available for this device,
> you should use it instead of the native driver
> [ 4.185665] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 4.280990] iTCO_vendor_support: vendor-support=0
> [ 4.304270] duplicate interface
> [ 4.307664] ipmi_si: Trying ACPI-specified kcs state machine at i/o
> address 0xca2, slave address 0x0, irq 0
> [ 4.318187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [ 4.323711] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
> TCOBASE=0x0460)
> [ 4.323818] e1000e 0000:00:19.0 eth3: renamed from eth0
> [ 4.336446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 4.342474] AVX version of gcm_enc/dec engaged.
> [ 4.346907] AES CTR mode by8 optimization enabled
> [ 4.351931] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> [ 4.352819] alg: No test for __gcm-aes-aesni
> (__driver-gcm-aes-aesni)
> [ 4.364158] i40e 0000:02:00.1 eth1: renamed from rename5
> [ 4.370154] [drm] Initialized drm 1.1.0 20060810
> [ 4.374797] Error: Driver 'pcspkr' is already registered,
> aborting...
> [ 4.381228] alg: No test for crc32 (crc32-pclmul)
> [ 4.395990] [TTM] Zone kernel: Available graphics memory: 16494382
> kiB
> [ 4.396626] i40e 0000:02:00.0 eth0: renamed from rename3
> [ 4.407813] [TTM] Zone dma32: Available graphics memory: 2097152
> kiB
> [ 4.414324] [TTM] Initializing pool allocator
> [ 4.418678] [TTM] Initializing DMA pool allocator
> [ 4.425605] intel_rapl: Found RAPL domain package
> [ 4.430215] intel_rapl: Found RAPL domain core
> [ 4.446166] fbcon: mgadrmfb (fb0) is primary device
> [ 4.489833] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c,
> prod_id: 0x0624, dev_id: 0x20)
> [ 4.489843] ipmi_si 00:0a: IPMI kcs interface initialized
> [ 4.604074] Console: switching to colour frame buffer device 128x48
> [ 4.698245] mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer device
> [ 4.704491] mgag200 0000:06:03.0: registered panic notifier
> [ 4.733133] [drm] Initialized mgag200 1.0.0 20110418 for
> 0000:06:03.0 on minor 0
> [ 4.975874] Adding 3905532k swap on /dev/sda1. Priority:-1
> extents:1 across:3905532k SSFS
> [ 5.002394] EXT4-fs (sda2): re-mounted. Opts: (null)
> [ 5.044749] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
> [ 5.077354] loop: module loaded
> [ 5.087636] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
> [ 5.101990] nf_conntrack version 0.5.0 (17374463 buckets, 138995704
> max)
> [ 5.108653] nf_conntrack: falling back to vmalloc.
> [ 5.735510] random: dd urandom read with 92 bits of entropy
> available
> [ 5.927034] bond0: Setting xmit hash policy to layer3+4 (1)
> [ 5.927105] bond0: Setting MII monitoring interval to 100
> [ 5.963685] bond0: Setting LACP rate to slow (0)
> [ 6.119830] bond0: Adding slave eth0
> [ 6.119841] i40e 0000:02:00.0 eth0: already using mac address
> 3c:fd:fe:9c:56:b8
> [ 6.123689] i40e 0000:02:00.0 eth0: NIC Link is Up 10 Gbps Full
> Duplex, Flow Control: None
> [ 6.123746] bond0: Enslaving eth0 as a backup interface with an up
> link
> [ 6.126208] bond0: Adding slave eth1
> [ 6.126212] i40e 0000:02:00.1 eth1: set new mac address
> 3c:fd:fe:9c:56:b8
> [ 6.135693] i40e 0000:02:00.1 eth1: NIC Link is Up 10 Gbps Full
> Duplex, Flow Control: None
> [ 6.135756] bond0: Enslaving eth1 as a backup interface with an up
> link
> [ 7.145905] random: nonblocking pool is initialized
> [ 12.460991] Process accounting resumed
> [ 12.918920] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
> [ 13.021814] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
> [ 13.279044] nf_conntrack: falling back to vmalloc.
> [ 13.323161] ip_tables: (C) 2000-2006 Netfilter Core Team
>
> On 2015-08-27 16:43, Rose, Gregory V wrote:
>>> -----Original Message-----
>>> From: Christian Ruppert [mailto:***@qasl.de]
>>> Sent: Thursday, August 27, 2015 4:54 AM
>>> To: Fujinaka, Todd
>>> Cc: Rose, Gregory V; e1000-***@lists.sf.net
>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>>
>>> Well, that's it for now anyway...
>>>
>>> ...
>>> Power cycle is required to complete the update process.
>>> Tool execution completed with the following status: All operations
>>> completed successfully
>>>
>>> The card doesn't even appear in "lspci" anymore... :/ I used a Win7
>>> to
>>> flash it since a co-worker already broke one when flashing via Linux.
>>> No
>>> idea how to unbrick it.
>>
>> Christian,
>>
>> I'm very sorry to hear that. It is pretty rare for this sort of thing
>> to happen but not unheard of. Please contact ***@intel.com to get
>> help replacing the part.
>>
>> - Greg
>>
>>>
>>>
>>> On 2015-08-27 01:25, Fujinaka, Todd wrote:
>>> > Attachments don't work on this mailing list (though they may have
>>> > gotten to Greg). Please file a bug on e1000.sourceforge.net and attach
>>> > the files there.
>>> >
>>> > Todd Fujinaka
>>> > Software Application Engineer
>>> > Networking Division (ND)
>>> > Intel Corporation
>>> > ***@intel.com
>>> > (503) 712-4565
>>> >
>>> > -----Original Message-----
>>> > From: Christian Ruppert [mailto:***@qasl.de]
>>> > Sent: Wednesday, August 26, 2015 10:24 AM
>>> > To: Rose, Gregory V
>>> > Cc: e1000-***@lists.sf.net
>>> > Subject: Re: [E1000-devel] X710 / i40e interface resets
>>> >
>>> > On 2015-08-26 01:19, Rose, Gregory V wrote:
>>> >>> -----Original Message-----
>>> >>> From: Christian Ruppert [mailto:***@qasl.de]
>>> >>> Sent: Friday, August 21, 2015 7:06 AM
>>> >>> To: Rose, Gregory V
>>> >>> Cc: e1000-***@lists.sf.net
>>> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>> >>>
>>> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>>> >>> >> -----Original Message-----
>>> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
>>> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>>> >>> >> To: Rose, Gregory V
>>> >>> >> Cc: e1000-***@lists.sf.net
>>> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>> >>> >>
>>> >>
>>> >> [snip]
>>> >>
>>> >>> > I've been told that the Tx driver issue detected message is due to
>>> >>> > a MDD (Malicious Driver Detection) event. We need to find out what
>>> >>> > is causing that so if you could please send me your system log and
>>> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I can
>>> >>> > see what might be occurring. If not then we'll have to debug
>>> further.
>>> >>>
>>> >>> See the initial Mail for ethtool -k and so on. Also:
>>> >>> # ethtool eth0
>>> >>> Settings for eth0:
>>> >>> Supported ports: [ FIBRE ]
>>> >>> Supported link modes: 1000baseT/Full
>>> >>> 10000baseT/Full
>>> >>> Supported pause frame use: Symmetric
>>> >>> Supports auto-negotiation: No
>>> >>> Advertised link modes: 1000baseT/Full
>>> >>> 10000baseT/Full
>>> >>> Advertised pause frame use: No
>>> >>> Advertised auto-negotiation: No
>>> >>> Speed: 10000Mb/s
>>> >>> Duplex: Full
>>> >>> Port: FIBRE
>>> >>> PHYAD: 0
>>> >>> Transceiver: external
>>> >>> Auto-negotiation: off
>>> >>> Supports Wake-on: d
>>> >>> Wake-on: d
>>> >>> Current message level: 0x0000000f (15)
>>> >>> drv probe link timer
>>> >>> Link detected: yes
>>> >>> # ethtool -i eth0
>>> >>> driver: i40e
>>> >>> version: 1.2.48
>>> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>>> >>> bus-info: 0000:02:00.0
>>> >>> supports-statistics: yes
>>> >>> supports-test: yes
>>> >>> supports-eeprom-access: yes
>>> >>> supports-register-dump: yes
>>> >>> supports-priv-flags: yes
>>> >>
>>> >> I also need the output of 'dmesg' - and I need to figure out how to
>>> >> determine what specific MDD event is occurring. I'll get back to you
>>> >> with instructions on how to do that when I get the system log from
>>> >> you.
>>> >
>>> > See the attached file. It's a dmesg from boot + some minutes.
>>> > I'll upgrade the card's firmware tomorrow I guess and try out the new
>>> > drivers btw.
>>> >
>>> >>
>>> >> Thanks,
>>> >>
>>> >> - Greg
>>> >
>>> > --
>>> > Regards,
>>> > Christian Ruppert
>>>
>>> --
>>> Regards,
>>> Christian Ruppert

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Christian Ruppert
2015-10-07 07:59:28 UTC
Permalink
Is there anything else I can do to help to get that debugged/fixed?
We upgraded the connection from 1G to 10G btw (it was 1G before).

On 2015-09-28 16:53, Christian Ruppert wrote:
> And there we go:
>
> [77571.409182] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [77572.245943] bond0: link status up again after 0 ms for interface
> eth1
> [94412.738896] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [94413.569379] bond0: link status up again after 0 ms for interface
> eth1
> [94516.443592] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [94516.718341] bond0: link status up again after 0 ms for interface
> eth1
> [96850.580882] i40e 0000:02:00.0: TX driver issue detected, PF reset
> issued
> [96851.036998] bond0: link status up again after 0 ms for interface
> eth0
> [96939.474122] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [96940.217799] bond0: link status up again after 0 ms for interface
> eth1
> [96945.007365] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [96945.225029] bond0: link status up again after 0 ms for interface
> eth1
> [96965.362669] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [96966.255350] bond0: link status up again after 0 ms for interface
> eth1
> [99844.991331] i40e 0000:02:00.0: TX driver issue detected, PF reset
> issued
> [99845.360288] bond0: link status up again after 0 ms for interface
> eth0
> [159908.054220] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [159909.165679] bond0: link status up again after 0 ms for interface
> eth1
> [329531.138706] i40e 0000:02:00.1: TX driver issue detected, PF reset
> issued
> [329532.167421] bond0: link status up again after 0 ms for interface
> eth1
>
> On 2015-09-25 16:19, Christian Ruppert wrote:
>> Hi,
>>
>> the card came back and I had to flash it again but it worked perfectly
>> fine this time :)
>> So I setup a new Kernel (3.18.20) and the most recent i40e driver
>> (1.3.39.1) and removed the previous workaround to disable ntuples on
>> both interfaces. So basically a vanilla setup.
>> That host is up for several hours no and there was no spam so far and
>> only one reset yet:
>> Sep 25 12:38:54 somehost kernel: [77571.409182] i40e 0000:02:00.1: TX
>> driver issue detected, PF reset issued
>> Sep 25 12:38:55 somehost kernel: [77572.245943] bond0: link status up
>> again after 0 ms for interface eth1
>>
>> and here's the requested dmesg again:
>> [ 0.000000] Initializing cgroup subsys cpuset
>> [ 0.000000] Initializing cgroup subsys cpu
>> [ 0.000000] Initializing cgroup subsys cpuacct
>> [ 0.000000] Linux version 3.18.20 (***@somehost) (gcc version 4.7.2
>> (Debian 4.7.2-5) ) #1 SMP Wed Aug 26 14:25:15 CEST 2015
>> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>> [ 0.000000] e820: BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff]
>> usable
>> [ 0.000000] BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000becc8fff]
>> usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000becc9000-0x00000000bed0bfff]
>> ACPI NVS
>> [ 0.000000] BIOS-e820: [mem 0x00000000bed0c000-0x00000000ce491fff]
>> usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000ce492000-0x00000000ce534fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000ce535000-0x00000000ce5c6fff]
>> usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000ce5c7000-0x00000000ce68bfff]
>> ACPI NVS
>> [ 0.000000] BIOS-e820: [mem 0x00000000ce68c000-0x00000000cf7fefff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
>> usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff]
>> usable
>> [ 0.000000] console [earlyser0] enabled
>> [ 0.000000] NX (Execute Disable) protection: active
>> [ 0.000000] SMBIOS 2.7 present.
>> [ 0.000000] DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2
>> 02/20/2015
>> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
>> reserved
>> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>> [ 0.000000] AGP: No AGP bridge found
>> [ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
>> [ 0.000000] MTRR default type: uncachable
>> [ 0.000000] MTRR fixed ranges enabled:
>> [ 0.000000] 00000-9FFFF write-back
>> [ 0.000000] A0000-BFFFF uncachable
>> [ 0.000000] C0000-CBFFF write-protect
>> [ 0.000000] CC000-E7FFF uncachable
>> [ 0.000000] E8000-FFFFF write-protect
>> [ 0.000000] MTRR variable ranges enabled:
>> [ 0.000000] 0 base 000000000 mask 800000000 write-back
>> [ 0.000000] 1 base 800000000 mask FE0000000 write-back
>> [ 0.000000] 2 base 820000000 mask FF0000000 write-back
>> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
>> [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
>> [ 0.000000] 5 disabled
>> [ 0.000000] 6 disabled
>> [ 0.000000] 7 disabled
>> [ 0.000000] 8 disabled
>> [ 0.000000] 9 disabled
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
>> 0x7010600070106
>> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
>> reserved
>> [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
>> [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf]
>> mapped at [ffff8800000fd7b0]
>> [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size
>> 24576
>> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
>> [ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
>> [ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
>> [ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
>> [ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
>> [ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M
>> [ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
>> [ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
>> [ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M
>> [ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff]
>> [ 0.000000] [mem 0x800000000-0x82bffffff] page 2M
>> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbecc8fff]
>> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
>> [ 0.000000] [mem 0x00200000-0xbebfffff] page 2M
>> [ 0.000000] [mem 0xbec00000-0xbecc8fff] page 4k
>> [ 0.000000] init_memory_mapping: [mem 0xbed0c000-0xce491fff]
>> [ 0.000000] [mem 0xbed0c000-0xbedfffff] page 4k
>> [ 0.000000] [mem 0xbee00000-0xce3fffff] page 2M
>> [ 0.000000] [mem 0xce400000-0xce491fff] page 4k
>> [ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
>> [ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
>> [ 0.000000] init_memory_mapping: [mem 0xce535000-0xce5c6fff]
>> [ 0.000000] [mem 0xce535000-0xce5c6fff] page 4k
>> [ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
>> [ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
>> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
>> [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
>> [ 0.000000] RAMDISK: [mem 0x360c0000-0x37057fff]
>> [ 0.000000] ACPI: Early table checksum verification disabled
>> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
>> [ 0.000000] ACPI: XSDT 0x00000000CE64F088 00008C (v01 SUPERM
>> SMCI--MB 00000001 AMI 00010013)
>> [ 0.000000] ACPI: FACP 0x00000000CE65A210 00010C (v05 SUPERM
>> SMCI--MB 00000001 AMI 00010013)
>> [ 0.000000] ACPI: DSDT 0x00000000CE64F1A8 00B068 (v02 SUPERM
>> SMCI--MB 00000000 INTL 20051117)
>> [ 0.000000] ACPI: FACS 0x00000000CE68A080 000040
>> [ 0.000000] ACPI: APIC 0x00000000CE65A320 000092 (v03 SUPERM
>> SMCI--MB 00000001 AMI 00010013)
>> [ 0.000000] ACPI: FPDT 0x00000000CE65A3B8 000044 (v01 SUPERM
>> SMCI--MB 00000001 AMI 00010013)
>> [ 0.000000] ACPI: MCFG 0x00000000CE65A400 00003C (v01 SUPERM
>> SMCI--MB 00000001 MSFT 00000097)
>> [ 0.000000] ACPI: HPET 0x00000000CE65A440 000038 (v01 SUPERM
>> SMCI--MB 00000001 AMI. 00000005)
>> [ 0.000000] ACPI: SSDT 0x00000000CE65A478 000397 (v01 SataRe
>> SataTabl 00001000 INTL 20091112)
>> [ 0.000000] ACPI: SPMI 0x00000000CE65A810 000040 (v05 A M I
>> OEMSPMI 00000000 AMI. 00000000)
>> [ 0.000000] ACPI: SSDT 0x00000000CE65A850 0009A4 (v01 PmRef
>> Cpu0Ist 00003000 INTL 20051117)
>> [ 0.000000] ACPI: SSDT 0x00000000CE65B1F8 000B18 (v01 PmRef CpuPm
>> 00003000 INTL 20051117)
>> [ 0.000000] ACPI: EINJ 0x00000000CE65BD10 000130 (v01 AMI AMI
>> EINJ 00000000 00000000)
>> [ 0.000000] ACPI: ERST 0x00000000CE65BE40 000210 (v01 AMIER AMI
>> ERST 00000000 00000000)
>> [ 0.000000] ACPI: HEST 0x00000000CE65C050 0000A8 (v01 AMI AMI
>> HEST 00000000 00000000)
>> [ 0.000000] ACPI: BERT 0x00000000CE65C0F8 000030 (v01 AMI AMI
>> BERT 00000000 00000000)
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] No NUMA configuration found
>> [ 0.000000] Faking a node at [mem
>> 0x0000000000000000-0x000000082fffffff]
>> [ 0.000000] NODE_DATA(0) allocated [mem 0x82ffdc000-0x82ffdffff]
>> [ 0.000000] [ffffea0000000000-ffffea001cbfffff] PMD ->
>> [ffff88080f600000-ffff88082b7fffff] on node 0
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
>> [ 0.000000] Normal [mem 0x100000000-0x82fffffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x00001000-0x00098fff]
>> [ 0.000000] node 0: [mem 0x00100000-0xbecc8fff]
>> [ 0.000000] node 0: [mem 0xbed0c000-0xce491fff]
>> [ 0.000000] node 0: [mem 0xce535000-0xce5c6fff]
>> [ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
>> [ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
>> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x82fffffff]
>> [ 0.000000] On node 0 totalpages: 8381562
>> [ 0.000000] DMA zone: 56 pages used for memmap
>> [ 0.000000] DMA zone: 21 pages reserved
>> [ 0.000000] DMA zone: 3992 pages, LIFO batch:0
>> [ 0.000000] DMA32 zone: 11498 pages used for memmap
>> [ 0.000000] DMA32 zone: 840930 pages, LIFO batch:31
>> [ 0.000000] Normal zone: 103040 pages used for memmap
>> [ 0.000000] Normal zone: 7536640 pages, LIFO batch:31
>> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
>> GSI 0-23
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
>> dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>> level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0x00000000-0x00000fff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0x00099000-0x00099fff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0x0009a000-0x0009ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0x000a0000-0x000dffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0x000e0000-0x000fffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xbecc9000-0xbed0bfff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xce492000-0xce534fff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xce5c7000-0xce68bfff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xce68c000-0xcf7fefff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xcf800000-0xdfffffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xe0000000-0xefffffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xf0000000-0xfebfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfec00000-0xfec00fff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfec01000-0xfecfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfed00000-0xfed03fff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfed04000-0xfed1bfff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfed1c000-0xfed1ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfed20000-0xfedfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfee00000-0xfee00fff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xfee01000-0xfeffffff]
>> [ 0.000000] PM: Registered nosave memory: [mem
>> 0xff000000-0xffffffff]
>> [ 0.000000] e820: [mem 0xcf800000-0xdfffffff] available for PCI
>> devices
>> [ 0.000000] Booting paravirtualized kernel on bare hardware
>> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
>> nr_cpu_ids:8 nr_node_ids:1
>> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s80960
>> r8192 d29632 u262144
>> [ 0.000000] pcpu-alloc: s80960 r8192 d29632 u262144 alloc=1*2097152
>> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
>> Total pages: 8266947
>> [ 0.000000] Policy zone: Normal
>> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>> [ 0.000000] Intel-IOMMU: disabled
>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
>> standard form
>> [ 0.000000] AGP: Checking aperture...
>> [ 0.000000] AGP: No AGP bridge found
>> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
>> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
>> bailing!
>> [ 0.000000] Memory: 32970712K/33526248K available (5512K kernel
>> code, 966K rwdata, 1832K rodata, 1228K init, 852K bss, 555536K
>> reserved)
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
>> nr_cpu_ids=8
>> [ 0.000000] NR_IRQS:33024 nr_irqs:488 0
>> [ 0.000000] Console: colour VGA+ 80x25
>> [ 0.000000] console [tty0] enabled
>> [ 0.000000] allocated 134217728 bytes of page_cgroup
>> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
>> want memory cgroups
>> [ 0.000000] hpet clockevent registered
>> [ 0.000000] tsc: Fast TSC calibration failed
>> [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
>> [ 0.000000] tsc: Detected 3499.669 MHz processor
>> [ 0.000025] Calibrating delay loop (skipped), value calculated
>> using timer frequency.. 6999.33 BogoMIPS (lpj=13998676)
>> [ 0.010617] pid_max: default: 32768 minimum: 301
>> [ 0.015230] ACPI: Core revision 20140926
>> [ 0.024681] ACPI: All ACPI Tables successfully acquired
>> [ 0.039606] Security Framework initialized
>> [ 0.043611] AppArmor: AppArmor disabled by boot time parameter
>> [ 0.049421] Yama: becoming mindful.
>> [ 0.054266] Dentry cache hash table entries: 4194304 (order: 13,
>> 33554432 bytes)
>> [ 0.067119] Inode-cache hash table entries: 2097152 (order: 12,
>> 16777216 bytes)
>> [ 0.076825] Mount-cache hash table entries: 65536 (order: 7, 524288
>> bytes)
>> [ 0.083636] Mountpoint-cache hash table entries: 65536 (order: 7,
>> 524288 bytes)
>> [ 0.091133] Initializing cgroup subsys memory
>> [ 0.095401] Initializing cgroup subsys devices
>> [ 0.099824] Initializing cgroup subsys freezer
>> [ 0.104249] Initializing cgroup subsys net_cls
>> [ 0.108676] Initializing cgroup subsys blkio
>> [ 0.112929] Initializing cgroup subsys perf_event
>> [ 0.117615] Initializing cgroup subsys net_prio
>> [ 0.122145] CPU: Physical Processor ID: 0
>> [ 0.126120] CPU: Processor Core ID: 0
>> [ 0.129769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>> [ 0.129769] ENERGY_PERF_BIAS: View and update with
>> x86_energy_perf_policy(8)
>> [ 0.143037] mce: CPU supports 9 MCE banks
>> [ 0.146959] CPU0: Thermal monitoring enabled (TM1)
>> [ 0.151728] process: using mwait in idle threads
>> [ 0.156328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>> [ 0.156328] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>> [ 0.168125] Freeing SMP alternatives memory: 20K (ffffffff81a26000
>> - ffffffff81a2b000)
>> [ 0.176733] ftrace: allocating 22083 entries in 87 pages
>> [ 0.197324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.242968] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 V2 @
>> 3.50GHz (fam: 06, model: 3a, stepping: 09)
>> [ 0.252247] TSC deadline timer enabled
>> [ 0.252264] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge
>> events, full-width counters, Intel PMU driver.
>> [ 0.262484] ... version: 3
>> [ 0.266477] ... bit width: 48
>> [ 0.270555] ... generic registers: 4
>> [ 0.274548] ... value mask: 0000ffffffffffff
>> [ 0.279843] ... max period: 0000ffffffffffff
>> [ 0.285137] ... fixed-purpose events: 3
>> [ 0.289130] ... event mask: 000000070000000f
>> [ 0.295409] x86: Booting SMP configuration:
>> [ 0.299494] .... node #0, CPUs: #1
>> [ 0.316534] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 0.324669] #2 #3 #4 #5 #6 #7
>> [ 0.407240] x86: Booted up 1 node, 8 CPUs
>> [ 0.411319] smpboot: Total of 8 processors activated (55994.70
>> BogoMIPS)
>> [ 0.424047] devtmpfs: initialized
>> [ 0.430926] PM: Registering ACPI NVS region [mem
>> 0xbecc9000-0xbed0bfff] (274432 bytes)
>> [ 0.438777] PM: Registering ACPI NVS region [mem
>> 0xce5c7000-0xce68bfff] (806912 bytes)
>> [ 0.447304] pinctrl core: initialized pinctrl subsystem
>> [ 0.452519] NET: Registered protocol family 16
>> [ 0.468890] cpuidle: using governor ladder
>> [ 0.488929] cpuidle: using governor menu
>> [ 0.492803] ACPI FADT declares the system doesn't support PCIe
>> ASPM, so disable it
>> [ 0.500309] ACPI: bus type PCI registered
>> [ 0.504301] acpiphp: ACPI Hot Plug PCI Controller Driver version:
>> 0.5
>> [ 0.510784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>> 0xe0000000-0xefffffff] (base 0xe0000000)
>> [ 0.520010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
>> in E820
>> [ 0.526980] PCI: Using configuration type 1 for base access
>> [ 0.544821] ACPI: Added _OSI(Module Device)
>> [ 0.548905] ACPI: Added _OSI(Processor Device)
>> [ 0.553330] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [ 0.558017] ACPI: Added _OSI(Processor Aggregator Device)
>> [ 0.565243] ACPI: Executed 1 blocks of module-level executable AML
>> code
>> [ 0.739624] \_SB_:_OSC invalid UUID
>> [ 0.739625] _OSC request data:1 1f
>> [ 0.739811] ACPI: Dynamic OEM Table Load:
>> [ 0.743707] ACPI: SSDT 0xFFFF880807B5C000 00083B (v01 PmRef
>> Cpu0Cst 00003001 INTL 20051117)
>> [ 0.764280] ACPI: Dynamic OEM Table Load:
>> [ 0.768173] ACPI: SSDT 0xFFFF880807049C00 000303 (v01 PmRef ApIst
>> 00003000 INTL 20051117)
>> [ 0.788649] ACPI: Dynamic OEM Table Load:
>> [ 0.792543] ACPI: SSDT 0xFFFF880807007C00 000119 (v01 PmRef ApCst
>> 00003000 INTL 20051117)
>> [ 0.813761] ACPI: Interpreter enabled
>> [ 0.817329] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>> State [\_S2_] (20140926/hwxface-580)
>> [ 0.826523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>> State [\_S3_] (20140926/hwxface-580)
>> [ 0.835727] ACPI: (supports S0 S1 S4 S5)
>> [ 0.839628] ACPI: Using IOAPIC for interrupt routing
>> [ 0.844615] HEST: Table parsing has been initialized.
>> [ 0.849610] PCI: Using host bridge windows from ACPI; if necessary,
>> use "pci=nocrs" and report a bug
>> [ 0.863689] ACPI: Power Resource [FN00] (off)
>> [ 0.868006] ACPI: Power Resource [FN01] (off)
>> [ 0.872344] ACPI: Power Resource [FN02] (off)
>> [ 0.876682] ACPI: Power Resource [FN03] (off)
>> [ 0.881022] ACPI: Power Resource [FN04] (off)
>> [ 0.885681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>> [ 0.891767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
>> ClockPM Segments MSI]
>> [ 0.900002] acpi PNP0A08:00: _OSC: platform does not support
>> [PCIeHotplug PME]
>> [ 0.907216] acpi PNP0A08:00: _OSC: OS now controls [AER
>> PCIeCapability]
>> [ 0.914173] PCI host bridge to bus 0000:00
>> [ 0.918169] pci_bus 0000:00: root bus resource [bus 00-fe]
>> [ 0.923636] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
>> [ 0.929798] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
>> [ 0.935959] pci_bus 0000:00: root bus resource [mem
>> 0x000a0000-0x000bffff]
>> [ 0.942817] pci_bus 0000:00: root bus resource [mem
>> 0x000cc000-0x000cffff]
>> [ 0.949673] pci_bus 0000:00: root bus resource [mem
>> 0x000d0000-0x000d3fff]
>> [ 0.956530] pci_bus 0000:00: root bus resource [mem
>> 0x000d4000-0x000d7fff]
>> [ 0.963386] pci_bus 0000:00: root bus resource [mem
>> 0x000d8000-0x000dbfff]
>> [ 0.970243] pci_bus 0000:00: root bus resource [mem
>> 0x000dc000-0x000dffff]
>> [ 0.977101] pci_bus 0000:00: root bus resource [mem
>> 0x000e0000-0x000e3fff]
>> [ 0.983957] pci_bus 0000:00: root bus resource [mem
>> 0x000e4000-0x000e7fff]
>> [ 0.990814] pci_bus 0000:00: root bus resource [mem
>> 0xd0000000-0xfeafffff]
>> [ 0.997674] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
>> [ 0.997751] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
>> [ 0.997831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>> [ 0.997870] pci 0000:00:01.0: System wakeup disabled by ACPI
>> [ 1.003450] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
>> [ 1.003473] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
>> [ 1.003502] pci 0000:00:01.1: System wakeup disabled by ACPI
>> [ 1.009121] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>> [ 1.009138] pci 0000:00:19.0: reg 0x10: [mem 0xdfb00000-0xdfb1ffff]
>> [ 1.009145] pci 0000:00:19.0: reg 0x14: [mem 0xdfb25000-0xdfb25fff]
>> [ 1.009153] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
>> [ 1.009212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>> [ 1.009246] pci 0000:00:19.0: System wakeup disabled by ACPI
>> [ 1.014835] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>> [ 1.014854] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb24000-0xdfb243ff]
>> [ 1.014938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>> [ 1.014983] pci 0000:00:1a.0: System wakeup disabled by ACPI
>> [ 1.020571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>> [ 1.020648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> [ 1.020686] pci 0000:00:1c.0: System wakeup disabled by ACPI
>> [ 1.026274] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
>> [ 1.026351] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>> [ 1.026388] pci 0000:00:1c.4: System wakeup disabled by ACPI
>> [ 1.031981] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>> [ 1.032000] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb23000-0xdfb233ff]
>> [ 1.032084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>> [ 1.032129] pci 0000:00:1d.0: System wakeup disabled by ACPI
>> [ 1.037718] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>> [ 1.037791] pci 0000:00:1e.0: System wakeup disabled by ACPI
>> [ 1.043379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
>> [ 1.043532] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>> [ 1.043549] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
>> [ 1.043556] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
>> [ 1.043563] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
>> [ 1.043570] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
>> [ 1.043577] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
>> [ 1.043584] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb22000-0xdfb227ff]
>> [ 1.043625] pci 0000:00:1f.2: PME# supported from D3hot
>> [ 1.043684] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>> [ 1.043697] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb21000-0xdfb210ff
>> 64bit]
>> [ 1.043716] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
>> [ 1.043832] pci 0000:00:01.0: PCI bridge to [bus 01]
>> [ 1.048735] pci 0000:02:00.0: [8086:1572] type 00 class 0x020000
>> [ 1.048745] pci 0000:02:00.0: reg 0x10: [mem 0xdd800000-0xddffffff
>> 64bit pref]
>> [ 1.048755] pci 0000:02:00.0: reg 0x1c: [mem 0xde808000-0xde80ffff
>> 64bit pref]
>> [ 1.048764] pci 0000:02:00.0: reg 0x30: [mem 0xdfa80000-0xdfafffff
>> pref]
>> [ 1.048800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>> [ 1.048818] pci 0000:02:00.0: reg 0x184: [mem 0xde400000-0xde40ffff
>> 64bit pref]
>> [ 1.048827] pci 0000:02:00.0: reg 0x190: [mem 0xde910000-0xde913fff
>> 64bit pref]
>> [ 1.048862] pci 0000:02:00.1: [8086:1572] type 00 class 0x020000
>> [ 1.048872] pci 0000:02:00.1: reg 0x10: [mem 0xdd000000-0xdd7fffff
>> 64bit pref]
>> [ 1.048882] pci 0000:02:00.1: reg 0x1c: [mem 0xde800000-0xde807fff
>> 64bit pref]
>> [ 1.048891] pci 0000:02:00.1: reg 0x30: [mem 0xdfa00000-0xdfa7ffff
>> pref]
>> [ 1.048925] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
>> [ 1.048942] pci 0000:02:00.1: reg 0x184: [mem 0xde000000-0xde00ffff
>> 64bit pref]
>> [ 1.048951] pci 0000:02:00.1: reg 0x190: [mem 0xde810000-0xde813fff
>> 64bit pref]
>> [ 1.056725] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>> [ 1.061856] pci 0000:00:01.1: bridge window [mem
>> 0xdfa00000-0xdfafffff]
>> [ 1.061858] pci 0000:00:01.1: bridge window [mem
>> 0xdd000000-0xdeafffff 64bit pref]
>> [ 1.061915] pci 0000:00:1c.0: PCI bridge to [bus 04]
>> [ 1.066903] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
>> [ 1.066942] pci 0000:05:00.0: reg 0x10: [mem 0xdf900000-0xdf91ffff]
>> [ 1.066987] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
>> [ 1.067010] pci 0000:05:00.0: reg 0x1c: [mem 0xdf920000-0xdf923fff]
>> [ 1.067239] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
>> [ 1.067289] pci 0000:05:00.0: System wakeup disabled by ACPI
>> [ 1.080881] pci 0000:00:1c.4: PCI bridge to [bus 05]
>> [ 1.085759] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>> [ 1.085762] pci 0000:00:1c.4: bridge window [mem
>> 0xdf900000-0xdf9fffff]
>> [ 1.085807] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
>> [ 1.085822] pci 0000:06:03.0: reg 0x10: [mem 0xdc000000-0xdcffffff
>> pref]
>> [ 1.085831] pci 0000:06:03.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
>> [ 1.085839] pci 0000:06:03.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
>> [ 1.085948] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive
>> decode)
>> [ 1.092645] pci 0000:00:1e.0: bridge window [mem
>> 0xdf000000-0xdf8fffff]
>> [ 1.092650] pci 0000:00:1e.0: bridge window [mem
>> 0xdc000000-0xdcffffff 64bit pref]
>> [ 1.092651] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
>> (subtractive decode)
>> [ 1.092652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
>> (subtractive decode)
>> [ 1.092653] pci 0000:00:1e.0: bridge window [mem
>> 0x000a0000-0x000bffff] (subtractive decode)
>> [ 1.092655] pci 0000:00:1e.0: bridge window [mem
>> 0x000cc000-0x000cffff] (subtractive decode)
>> [ 1.092656] pci 0000:00:1e.0: bridge window [mem
>> 0x000d0000-0x000d3fff] (subtractive decode)
>> [ 1.092657] pci 0000:00:1e.0: bridge window [mem
>> 0x000d4000-0x000d7fff] (subtractive decode)
>> [ 1.092658] pci 0000:00:1e.0: bridge window [mem
>> 0x000d8000-0x000dbfff] (subtractive decode)
>> [ 1.092659] pci 0000:00:1e.0: bridge window [mem
>> 0x000dc000-0x000dffff] (subtractive decode)
>> [ 1.092660] pci 0000:00:1e.0: bridge window [mem
>> 0x000e0000-0x000e3fff] (subtractive decode)
>> [ 1.092661] pci 0000:00:1e.0: bridge window [mem
>> 0x000e4000-0x000e7fff] (subtractive decode)
>> [ 1.092662] pci 0000:00:1e.0: bridge window [mem
>> 0xd0000000-0xfeafffff] (subtractive decode)
>> [ 1.092690] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
>> unsupported)
>> [ 1.100314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
>> 14 15)
>> [ 1.107107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12
>> 14 15)
>> [ 1.113962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12
>> 14 15)
>> [ 1.120818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12
>> 14 15)
>> [ 1.127675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12
>> 14 15)
>> [ 1.134531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
>> 14 15) *0, disabled.
>> [ 1.142515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12
>> 14 15) *0, disabled.
>> [ 1.150505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12
>> 14 15)
>> [ 1.157484] ACPI: Enabled 4 GPEs in block 00 to 3F
>> [ 1.162221] vgaarb: setting as boot device: PCI:0000:06:03.0
>> [ 1.167794] vgaarb: device added:
>> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
>> [ 1.175867] vgaarb: loaded
>> [ 1.178556] vgaarb: bridge control possible 0000:06:03.0
>> [ 1.183909] PCI: Using ACPI for IRQ routing
>> [ 1.193792] PCI: pci_cache_line_size set to 64 bytes
>> [ 1.193833] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
>> [ 1.193834] e820: reserve RAM buffer [mem 0xbecc9000-0xbfffffff]
>> [ 1.193835] e820: reserve RAM buffer [mem 0xce492000-0xcfffffff]
>> [ 1.193836] e820: reserve RAM buffer [mem 0xce5c7000-0xcfffffff]
>> [ 1.193837] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
>> [ 1.193935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>> [ 1.199994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>> [ 1.207831] Switched to clocksource hpet
>> [ 1.215086] pnp: PnP ACPI init
>> [ 1.218096] system 00:00: [mem 0xfed40000-0xfed44fff] has been
>> reserved
>> [ 1.224641] system 00:00: Plug and Play ACPI device, IDs PNP0c01
>> (active)
>> [ 1.224688] system 00:01: [io 0x0680-0x069f] has been reserved
>> [ 1.230542] system 00:01: [io 0x1000-0x100f] has been reserved
>> [ 1.236442] system 00:01: [io 0xffff] has been reserved
>> [ 1.241736] system 00:01: [io 0xffff] has been reserved
>> [ 1.247031] system 00:01: [io 0x0400-0x0453] could not be reserved
>> [ 1.253282] system 00:01: [io 0x0458-0x047f] has been reserved
>> [ 1.259182] system 00:01: [io 0x0500-0x057f] has been reserved
>> [ 1.265084] system 00:01: [io 0x164e-0x164f] has been reserved
>> [ 1.270987] system 00:01: Plug and Play ACPI device, IDs PNP0c02
>> (active)
>> [ 1.271008] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
>> (active)
>> [ 1.271039] system 00:03: [io 0x0454-0x0457] has been reserved
>> [ 1.276891] system 00:03: Plug and Play ACPI device, IDs INT3f0d
>> PNP0c02 (active)
>> [ 1.276924] system 00:04: [io 0x04d0-0x04d1] has been reserved
>> [ 1.282792] system 00:04: Plug and Play ACPI device, IDs PNP0c02
>> (active)
>> [ 1.282868] system 00:05: [io 0x0a00-0x0a1f] has been reserved
>> [ 1.288693] system 00:05: [io 0x0a30-0x0a3f] has been reserved
>> [ 1.294594] system 00:05: Plug and Play ACPI device, IDs PNP0c02
>> (active)
>> [ 1.294751] pnp 00:06: [dma 0 disabled]
>> [ 1.294780] pnp 00:06: Plug and Play ACPI device, IDs PNP0501
>> (active)
>> [ 1.294921] pnp 00:07: [dma 0 disabled]
>> [ 1.294947] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
>> (active)
>> [ 1.295019] system 00:08: [io 0x0b00-0x0b7f] has been reserved
>> [ 1.300845] system 00:08: Plug and Play ACPI device, IDs PNP0c02
>> (active)
>> [ 1.300958] pnp 00:09: [dma 0 disabled]
>> [ 1.300985] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
>> (active)
>> [ 1.301064] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001
>> (active)
>> [ 1.301198] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been
>> reserved
>> [ 1.307720] system 00:0b: [mem 0xfed10000-0xfed17fff] has been
>> reserved
>> [ 1.314314] system 00:0b: [mem 0xfed18000-0xfed18fff] has been
>> reserved
>> [ 1.320909] system 00:0b: [mem 0xfed19000-0xfed19fff] has been
>> reserved
>> [ 1.327506] system 00:0b: [mem 0xe0000000-0xefffffff] has been
>> reserved
>> [ 1.334102] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been
>> reserved
>> [ 1.340701] system 00:0b: [mem 0xfed90000-0xfed93fff] has been
>> reserved
>> [ 1.347295] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been
>> reserved
>> [ 1.353892] system 00:0b: [mem 0xff000000-0xffffffff] has been
>> reserved
>> [ 1.360488] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
>> reserved
>> [ 1.367430] system 00:0b: [mem 0xd0000000-0xd0000fff] has been
>> reserved
>> [ 1.374027] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
>> (active)
>> [ 1.374113] pnp: PnP ACPI: found 12 devices
>> [ 1.384167] pci 0000:00:01.0: PCI bridge to [bus 01]
>> [ 1.389053] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>> [ 1.394250] pci 0000:00:01.1: bridge window [mem
>> 0xdfa00000-0xdfafffff]
>> [ 1.401020] pci 0000:00:01.1: bridge window [mem
>> 0xdd000000-0xdeafffff 64bit pref]
>> [ 1.408745] pci 0000:00:1c.0: PCI bridge to [bus 04]
>> [ 1.413701] pci 0000:00:1c.4: PCI bridge to [bus 05]
>> [ 1.418641] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>> [ 1.424718] pci 0000:00:1c.4: bridge window [mem
>> 0xdf900000-0xdf9fffff]
>> [ 1.431489] pci 0000:00:1e.0: PCI bridge to [bus 06]
>> [ 1.436435] pci 0000:00:1e.0: bridge window [mem
>> 0xdf000000-0xdf8fffff]
>> [ 1.443203] pci 0000:00:1e.0: bridge window [mem
>> 0xdc000000-0xdcffffff 64bit pref]
>> [ 1.450929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>> [ 1.450931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>> [ 1.450932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 1.450933] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
>> [ 1.450934] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
>> [ 1.450935] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
>> [ 1.450936] pci_bus 0000:00: resource 10 [mem
>> 0x000d8000-0x000dbfff]
>> [ 1.450937] pci_bus 0000:00: resource 11 [mem
>> 0x000dc000-0x000dffff]
>> [ 1.450938] pci_bus 0000:00: resource 12 [mem
>> 0x000e0000-0x000e3fff]
>> [ 1.450939] pci_bus 0000:00: resource 13 [mem
>> 0x000e4000-0x000e7fff]
>> [ 1.450940] pci_bus 0000:00: resource 14 [mem
>> 0xd0000000-0xfeafffff]
>> [ 1.450941] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
>> [ 1.450942] pci_bus 0000:02: resource 2 [mem 0xdd000000-0xdeafffff
>> 64bit pref]
>> [ 1.450943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
>> [ 1.450944] pci_bus 0000:05: resource 1 [mem 0xdf900000-0xdf9fffff]
>> [ 1.450946] pci_bus 0000:06: resource 1 [mem 0xdf000000-0xdf8fffff]
>> [ 1.450947] pci_bus 0000:06: resource 2 [mem 0xdc000000-0xdcffffff
>> 64bit pref]
>> [ 1.450948] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
>> [ 1.450949] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
>> [ 1.450950] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 1.450951] pci_bus 0000:06: resource 7 [mem 0x000cc000-0x000cffff]
>> [ 1.450952] pci_bus 0000:06: resource 8 [mem 0x000d0000-0x000d3fff]
>> [ 1.450953] pci_bus 0000:06: resource 9 [mem 0x000d4000-0x000d7fff]
>> [ 1.450954] pci_bus 0000:06: resource 10 [mem
>> 0x000d8000-0x000dbfff]
>> [ 1.450955] pci_bus 0000:06: resource 11 [mem
>> 0x000dc000-0x000dffff]
>> [ 1.450956] pci_bus 0000:06: resource 12 [mem
>> 0x000e0000-0x000e3fff]
>> [ 1.450957] pci_bus 0000:06: resource 13 [mem
>> 0x000e4000-0x000e7fff]
>> [ 1.450958] pci_bus 0000:06: resource 14 [mem
>> 0xd0000000-0xfeafffff]
>> [ 1.451014] NET: Registered protocol family 2
>> [ 1.455462] TCP established hash table entries: 262144 (order: 9,
>> 2097152 bytes)
>> [ 1.463005] TCP bind hash table entries: 65536 (order: 8, 1048576
>> bytes)
>> [ 1.469713] TCP: Hash tables configured (established 262144 bind
>> 65536)
>> [ 1.476246] TCP: reno registered
>> [ 1.479464] UDP hash table entries: 16384 (order: 7, 524288 bytes)
>> [ 1.485680] UDP-Lite hash table entries: 16384 (order: 7, 524288
>> bytes)
>> [ 1.492306] NET: Registered protocol family 1
>> [ 1.496818] PCI: CLS mismatch (64 != 32), using 64 bytes
>> [ 1.496823] pci 0000:06:03.0: Video device with shadowed ROM
>> [ 1.496853] Unpacking initramfs...
>> [ 1.690454] Freeing initrd memory: 15968K (ffff8800360c0000 -
>> ffff880037058000)
>> [ 1.697700] PCI-DMA: Using software bounce buffering for IO
>> (SWIOTLB)
>> [ 1.704118] software IO TLB [mem 0xca492000-0xce492000] (64MB)
>> mapped at [ffff8800ca492000-ffff8800ce491fff]
>> [ 1.714164] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
>> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>> [ 1.724674] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.730426] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.736250] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.750730] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.756546] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.762360] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.768179] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.773991] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
>> [ 1.779835] microcode: Microcode Update Driver: v2.00
>> <***@aivazian.fsnet.co.uk>, Peter Oruba
>> [ 1.788826] futex hash table entries: 2048 (order: 5, 131072 bytes)
>> [ 1.795033] audit: initializing netlink subsys (disabled)
>> [ 1.800388] audit: type=2000 audit(1443100076.548:1): initialized
>> [ 1.806664] HugeTLB registered 2 MB page size, pre-allocated 0
>> pages
>> [ 1.812933] zpool: loaded
>> [ 1.815517] zbud: loaded
>> [ 1.818158] VFS: Disk quotas dquot_6.5.2
>> [ 1.821997] Dquot-cache hash table entries: 512 (order 0, 4096
>> bytes)
>> [ 1.828445] msgmni has been set to 32768
>> [ 1.832595] alg: No test for stdrng (krng)
>> [ 1.836625] Block layer SCSI generic (bsg) driver version 0.4
>> loaded (major 252)
>> [ 1.844014] io scheduler noop registered
>> [ 1.847878] io scheduler deadline registered
>> [ 1.852131] io scheduler cfq registered (default)
>> [ 1.856959] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>> [ 1.857070] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
>> [ 1.857283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [ 1.862775] pciehp: PCI Express Hot Plug Controller Driver version:
>> 0.4
>> [ 1.869391] intel_idle: MWAIT substates: 0x1120
>> [ 1.869392] intel_idle: v0.4 model 0x3A
>> [ 1.869393] intel_idle: lapic_timer_reliable_states 0xffffffff
>> [ 1.869628] ERST: Error Record Serialization Table (ERST) support
>> is initialized.
>> [ 1.877034] pstore: Registered erst as persistent store backend
>> [ 1.882975] GHES: APEI firmware first mode is enabled by WHEA _OSC.
>> [ 1.889229] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> [ 1.915898] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
>> is a 16550A
>> [ 1.943574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
>> is a 16550A
>> [ 1.971232] 00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud =
>> 115200) is a 16550A
>> [ 1.978753] Linux agpgart interface v0.103
>> [ 1.982831] i8042: PNP: No PS/2 controller found. Probing ports
>> directly.
>> [ 1.992701] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 1.997575] serio: i8042 AUX port at 0x60,0x64 irq 12
>> [ 2.002720] mousedev: PS/2 mouse device common for all mice
>> [ 2.008232] rtc_cmos 00:02: RTC can wake from S4
>> [ 2.012908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>> [ 2.018943] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
>> nvram, hpet irqs
>> [ 2.026564] ledtrig-cpu: registered to indicate activity on CPUs
>> [ 2.032717] AMD IOMMUv2 driver by Joerg Roedel
>> <***@amd.com>
>> [ 2.039059] AMD IOMMUv2 functionality not available on this system
>> [ 2.045283] TCP: cubic registered
>> [ 2.048521] IPv6: Loaded, but administratively disabled, reboot
>> required to enable
>> [ 2.056071] mip6: Mobile IPv6
>> [ 2.059020] mip6: mip6_init: can't add xfrm type(destopt)
>> [ 2.064404] NET: Registered protocol family 17
>> [ 2.068836] mpls_gso: MPLS GSO support
>> [ 2.072972] registered taskstats version 1
>> [ 2.077499] rtc_cmos 00:02: setting system clock to 2015-09-24
>> 13:07:57 UTC (1443100077)
>> [ 2.085560] PM: Hibernation image not present or could not be
>> loaded.
>> [ 2.086094] Freeing unused kernel memory: 1228K (ffffffff818f3000 -
>> ffffffff81a26000)
>> [ 2.093851] Write protecting the kernel read-only data: 8192k
>> [ 2.100532] Freeing unused kernel memory: 620K (ffff880001565000 -
>> ffff880001600000)
>> [ 2.108556] Freeing unused kernel memory: 216K (ffff8800017ca000 -
>> ffff880001800000)
>> [ 2.123393] udevd[94]: starting version 175
>> [ 2.131920] pps_core: LinuxPPS API ver. 1 registered
>> [ 2.136823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
>> Rodolfo Giometti <***@linux.it>
>> [ 2.147106] PTP clock support registered
>> [ 2.151071] ACPI: bus type USB registered
>> [ 2.155038] usbcore: registered new interface driver usbfs
>> [ 2.160469] usbcore: registered new interface driver hub
>> [ 2.165787] usbcore: registered new device driver usb
>> [ 2.171019] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>> [ 2.176789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>> [ 2.182928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>> Driver
>> [ 2.189595] ehci-pci: EHCI PCI platform driver
>> [ 2.194192] i40e: Intel(R) Ethernet Connection XL710 Network Driver
>> - version 1.3.39.1
>> [ 2.197599] e1000e 0000:00:19.0: Interrupt Throttling Rate
>> (ints/sec) set to dynamic conservative mode
>> [ 2.197641] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> [ 2.198073] thermal LNXTHERM:00: registered as thermal_zone0
>> [ 2.198073] ACPI: Thermal Zone [TZ00] (28 C)
>> [ 2.198216] thermal LNXTHERM:01: registered as thermal_zone1
>> [ 2.198216] ACPI: Thermal Zone [TZ01] (30 C)
>> [ 2.231104] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
>> [ 2.249391] i40e 0000:02:00.0: fw 4.40.35115 api 1.4 nvm 4.53
>> 0x80001dc0 1.123.0
>> [ 2.256998] SCSI subsystem initialized
>> [ 2.261957] libata version 3.00 loaded.
>> [ 2.453377] e1000e 0000:00:19.0 eth0: registered PHC clock
>> [ 2.458796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width
>> x1) 00:25:90:a8:02:51
>> [ 2.466693] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
>> Connection
>> [ 2.473600] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
>> FFFFFF-0FF
>> [ 2.480564] ehci-pci 0000:00:1a.0: EHCI Host Controller
>> [ 2.480631] e1000e 0000:05:00.0: Interrupt Throttling Rate
>> (ints/sec) set to dynamic conservative mode
>> [ 2.480663] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
>> [ 2.480665] e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
>> [ 2.480667] e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
>> [ 2.495076] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
>> bus number 1
>> [ 2.495874] i40e 0000:02:00.0: MAC address: 3c:fd:fe:9c:56:b8
>> [ 2.499857] i40e 0000:02:00.0: SAN MAC: 3c:fd:fe:9c:56:ba
>> [ 2.513542] ehci-pci 0000:00:1a.0: debug port 2
>> [ 2.514095] i40e 0000:02:00.0: irq 30 for MSI/MSI-X
>> [ 2.514098] i40e 0000:02:00.0: irq 31 for MSI/MSI-X
>> [ 2.514099] i40e 0000:02:00.0: irq 32 for MSI/MSI-X
>> [ 2.514101] i40e 0000:02:00.0: irq 33 for MSI/MSI-X
>> [ 2.514103] i40e 0000:02:00.0: irq 34 for MSI/MSI-X
>> [ 2.514105] i40e 0000:02:00.0: irq 35 for MSI/MSI-X
>> [ 2.514107] i40e 0000:02:00.0: irq 36 for MSI/MSI-X
>> [ 2.514108] i40e 0000:02:00.0: irq 37 for MSI/MSI-X
>> [ 2.514110] i40e 0000:02:00.0: irq 38 for MSI/MSI-X
>> [ 2.514111] i40e 0000:02:00.0: irq 39 for MSI/MSI-X
>> [ 2.514113] i40e 0000:02:00.0: irq 40 for MSI/MSI-X
>> [ 2.514114] i40e 0000:02:00.0: irq 41 for MSI/MSI-X
>> [ 2.514116] i40e 0000:02:00.0: irq 42 for MSI/MSI-X
>> [ 2.514118] i40e 0000:02:00.0: irq 43 for MSI/MSI-X
>> [ 2.514119] i40e 0000:02:00.0: irq 44 for MSI/MSI-X
>> [ 2.514121] i40e 0000:02:00.0: irq 45 for MSI/MSI-X
>> [ 2.514122] i40e 0000:02:00.0: irq 46 for MSI/MSI-X
>> [ 2.514124] i40e 0000:02:00.0: irq 47 for MSI/MSI-X
>> [ 2.521951] ehci-pci 0000:00:1a.0: cache line size of 64 is not
>> supported
>> [ 2.521964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb24000
>> [ 2.537912] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>> [ 2.543607] usb usb1: New USB device found, idVendor=1d6b,
>> idProduct=0002
>> [ 2.550333] usb usb1: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 2.557541] usb usb1: Product: EHCI Host Controller
>> [ 2.562399] usb usb1: Manufacturer: Linux 3.18.20 ehci_hcd
>> [ 2.568471] usb usb1: SerialNumber: 0000:00:1a.0
>> [ 2.573164] hub 1-0:1.0: USB hub found
>> [ 2.576818] hub 1-0:1.0: 2 ports detected
>> [ 2.580962] ehci-pci 0000:00:1d.0: EHCI Host Controller
>> [ 2.586095] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
>> bus number 2
>> [ 2.593480] ehci-pci 0000:00:1d.0: debug port 2
>> [ 2.599535] e1000e 0000:05:00.0 eth2: registered PHC clock
>> [ 2.601911] ehci-pci 0000:00:1d.0: cache line size of 64 is not
>> supported
>> [ 2.601922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb23000
>> [ 2.610602] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width
>> x1) 00:25:90:a8:02:50
>> [ 2.613936] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>> [ 2.613963] usb usb2: New USB device found, idVendor=1d6b,
>> idProduct=0002
>> [ 2.613964] usb usb2: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 2.613965] usb usb2: Product: EHCI Host Controller
>> [ 2.613965] usb usb2: Manufacturer: Linux 3.18.20 ehci_hcd
>> [ 2.613966] usb usb2: SerialNumber: 0000:00:1d.0
>> [ 2.614075] hub 2-0:1.0: USB hub found
>> [ 2.614078] hub 2-0:1.0: 2 ports detected
>> [ 2.614192] ahci 0000:00:1f.2: version 3.0
>> [ 2.614340] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
>> [ 2.614485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3
>> Gbps 0x3f impl SATA mode
>> [ 2.614486] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
>> part ems apst
>> [ 2.626630] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x8
>> [ 2.654604] scsi host0: ahci
>> [ 2.654992] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66
>> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>> [ 2.657763] scsi host1: ahci
>> [ 2.658083] scsi host2: ahci
>> [ 2.658320] scsi host3: ahci
>> [ 2.658546] scsi host4: ahci
>> [ 2.658747] scsi host5: ahci
>> [ 2.658785] ata1: SATA max UDMA/133 abar ***@0xdfb22000 port
>> 0xdfb22100 irq 48
>> [ 2.658788] ata2: SATA max UDMA/133 abar ***@0xdfb22000 port
>> 0xdfb22180 irq 48
>> [ 2.658790] ata3: SATA max UDMA/133 abar ***@0xdfb22000 port
>> 0xdfb22200 irq 48
>> [ 2.658792] ata4: SATA max UDMA/133 abar ***@0xdfb22000 port
>> 0xdfb22280 irq 48
>> [ 2.658795] ata5: SATA max UDMA/133 abar ***@0xdfb22000 port
>> 0xdfb22300 irq 48
>> [ 2.658798] ata6: SATA max UDMA/133 abar ***@0xdfb22000 port
>> 0xdfb22380 irq 48
>> [ 2.670025] i40e 0000:02:00.1: fw 4.40.35115 api 1.4 nvm 4.53
>> 0x80001dc0 1.123.0
>> [ 2.714122] tsc: Refined TSC clocksource calibration: 3500.024 MHz
>> [ 2.769612] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network
>> Connection
>> [ 2.776551] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No:
>> FFFFFF-0FF
>> [ 2.890322] usb 1-1: new high-speed USB device number 2 using
>> ehci-pci
>> [ 2.916415] i40e 0000:02:00.1: MAC address: 3c:fd:fe:9c:56:b9
>> [ 2.926260] i40e 0000:02:00.1: SAN MAC: 3c:fd:fe:9c:56:bb
>> [ 2.930381] usb 2-1: new high-speed USB device number 2 using
>> ehci-pci
>> [ 2.952496] i40e 0000:02:00.1: irq 49 for MSI/MSI-X
>> [ 2.952503] i40e 0000:02:00.1: irq 50 for MSI/MSI-X
>> [ 2.952508] i40e 0000:02:00.1: irq 51 for MSI/MSI-X
>> [ 2.952512] i40e 0000:02:00.1: irq 52 for MSI/MSI-X
>> [ 2.952516] i40e 0000:02:00.1: irq 53 for MSI/MSI-X
>> [ 2.952520] i40e 0000:02:00.1: irq 54 for MSI/MSI-X
>> [ 2.952525] i40e 0000:02:00.1: irq 55 for MSI/MSI-X
>> [ 2.952537] i40e 0000:02:00.1: irq 56 for MSI/MSI-X
>> [ 2.952539] i40e 0000:02:00.1: irq 57 for MSI/MSI-X
>> [ 2.952541] i40e 0000:02:00.1: irq 58 for MSI/MSI-X
>> [ 2.952543] i40e 0000:02:00.1: irq 59 for MSI/MSI-X
>> [ 2.952545] i40e 0000:02:00.1: irq 60 for MSI/MSI-X
>> [ 2.952547] i40e 0000:02:00.1: irq 61 for MSI/MSI-X
>> [ 2.952549] i40e 0000:02:00.1: irq 62 for MSI/MSI-X
>> [ 2.952550] i40e 0000:02:00.1: irq 63 for MSI/MSI-X
>> [ 2.952554] i40e 0000:02:00.1: irq 64 for MSI/MSI-X
>> [ 2.952556] i40e 0000:02:00.1: irq 65 for MSI/MSI-X
>> [ 2.952558] i40e 0000:02:00.1: irq 66 for MSI/MSI-X
>> [ 2.978497] ata5: SATA link down (SStatus 0 SControl 300)
>> [ 2.983838] ata6: SATA link down (SStatus 0 SControl 300)
>> [ 2.989225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 2.995381] ata4: SATA link down (SStatus 0 SControl 300)
>> [ 3.000756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 3.007184] ata2: SATA link down (SStatus 0 SControl 300)
>> [ 3.012510] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> succeeded
>> [ 3.012514] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> LOCK) filtered out
>> [ 3.020391] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> CONFIGURATION OVERLAY) filtered out
>> [ 3.026954] usb 1-1: New USB device found, idVendor=8087,
>> idProduct=0024
>> [ 3.026955] usb 1-1: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=0
>> [ 3.027240] hub 1-1:1.0: USB hub found
>> [ 3.027332] hub 1-1:1.0: 6 ports detected
>> [ 3.050510] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> succeeded
>> [ 3.050512] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> LOCK) filtered out
>> [ 3.061847] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x8
>> [ 3.067012] usb 2-1: New USB device found, idVendor=8087,
>> idProduct=0024
>> [ 3.067013] usb 2-1: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=0
>> [ 3.067296] hub 2-1:1.0: USB hub found
>> [ 3.067384] hub 2-1:1.0: 6 ports detected
>> [ 3.090237] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66
>> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>> [ 3.103551] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> CONFIGURATION OVERLAY) filtered out
>> [ 3.112266] ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10250, max
>> UDMA/133
>> [ 3.118799] ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth
>> 31/32)
>> [ 3.125486] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, 1.00, max
>> UDMA/133
>> [ 3.132254] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> succeeded
>> [ 3.132259] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> LOCK) filtered out
>> [ 3.140106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> CONFIGURATION OVERLAY) filtered out
>> [ 3.148916] ata1.00: configured for UDMA/133
>> [ 3.153298] scsi 0:0:0:0: Direct-Access ATA INTEL
>> SSDSC2BA20 0250 PQ: 0 ANSI: 5
>> [ 3.154140] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> succeeded
>> [ 3.154142] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> LOCK) filtered out
>> [ 3.154143] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> CONFIGURATION OVERLAY) filtered out
>> [ 3.156130] ata3.00: configured for UDMA/133
>> [ 3.185352] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N
>> 1.00 PQ: 0 ANSI: 5
>> [ 3.298953] usb 1-1.2: new full-speed USB device number 3 using
>> ehci-pci
>> [ 3.323219] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks:
>> (200 GB/186 GiB)
>> [ 3.330670] sd 0:0:0:0: [sda] Write Protect is off
>> [ 3.335418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ 3.335427] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [ 3.338917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
>> dvd-ram cd/rw xa/form2 cdda tray
>> [ 3.338918] cdrom: Uniform CD-ROM driver Revision: 3.20
>> [ 3.339081] sr 2:0:0:0: Attached scsi CD-ROM sr0
>> [ 3.358408] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 3.358668] sda: sda1 sda2
>> [ 3.358886] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ 3.371134] sr 2:0:0:0: Attached scsi generic sg1 type 5
>> [ 3.396737] usb 1-1.2: New USB device found, idVendor=0557,
>> idProduct=2221
>> [ 3.403526] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=0
>> [ 3.410814] usb 1-1.2: Product: Hermon USB hidmouse Device
>> [ 3.416282] usb 1-1.2: Manufacturer: Winbond Electronics Corp
>> [ 3.423736] hidraw: raw HID events driver (C) Jiri Kosina
>> [ 3.430436] usbcore: registered new interface driver usbhid
>> [ 3.435922] usbhid: USB HID core driver
>> [ 3.440716] input: Winbond Electronics Corp Hermon USB hidmouse
>> Device as
>> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0557:2221.0001/input/input2
>> [ 3.455434] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID
>> v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on
>> usb-0000:00:1a.0-1.2/input0
>> [ 3.470147] input: Winbond Electronics Corp Hermon USB hidmouse
>> Device as
>> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0557:2221.0002/input/input3
>> [ 3.484849] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID
>> v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device]
>> on usb-0000:00:1a.0-1.2/input1
>> [ 3.507384] PM: Starting manual resume from disk
>> [ 3.511922] PM: Hibernation image partition 8:1 present
>> [ 3.511923] PM: Looking for hibernation image.
>> [ 3.512127] PM: Image not found (code -22)
>> [ 3.512131] PM: Hibernation image not present or could not be
>> loaded.
>> [ 3.517313] EXT4-fs (sda2): mounting ext3 file system using the
>> ext4 subsystem
>> [ 3.529000] EXT4-fs (sda2): mounted filesystem with ordered data
>> mode. Opts: (null)
>> [ 3.715841] Switched to clocksource tsc
>> [ 3.885031] udevd[667]: starting version 175
>> [ 4.011695] input: Power Button as
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>> [ 4.020070] ACPI: Power Button [PWRB]
>> [ 4.023703] input: Power Button as
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>> [ 4.031033] ACPI: Power Button [PWRF]
>> [ 4.034781] EDAC MC: Ver: 3.0.0
>> [ 4.038626] EDAC MC0: Giving out device to module ie31200_edac
>> controller IE31200: DEV 0000:00:00.0 (POLLED)
>> [ 4.115904] ipmi message handler version 39.2
>> [ 4.121319] IPMI System Interface driver.
>> [ 4.126068] ipmi_si: probing via ACPI
>> [ 4.129851] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
>> [ 4.135777] i40e 0000:02:00.1 rename5: renamed from eth3
>> [ 4.141149] ipmi_si: Adding ACPI-specified kcs state machine
>> [ 4.147092] ipmi_si: probing via SMBIOS
>> [ 4.147160] input: PC Speaker as
>> /devices/platform/pcspkr/input/input6
>> [ 4.157409] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
>> [ 4.163305] ipmi_si: Adding SMBIOS-specified kcs state machine
>> duplicate interface
>> [ 4.170854] ipmi_si: probing via SPMI
>> [ 4.174504] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
>> [ 4.177849] i40e 0000:02:00.0 rename3: renamed from eth1
>> [ 4.185527] ipmi_si: Adding SPMI-specified kcs state machine
>> [ 4.185655] ACPI Warning: SystemIO range
>> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
>> 0x0000000000000400-0x000000000000047F (\PMIO) (20140926/utaddress-254)
>> [ 4.185658] ACPI: If an ACPI driver is available for this device,
>> you should use it instead of the native driver
>> [ 4.185660] ACPI Warning: SystemIO range
>> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
>> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>> [ 4.185662] ACPI: If an ACPI driver is available for this device,
>> you should use it instead of the native driver
>> [ 4.185662] ACPI Warning: SystemIO range
>> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
>> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>> [ 4.185664] ACPI: If an ACPI driver is available for this device,
>> you should use it instead of the native driver
>> [ 4.185664] ACPI Warning: SystemIO range
>> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
>> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>> [ 4.185665] ACPI: If an ACPI driver is available for this device,
>> you should use it instead of the native driver
>> [ 4.185665] lpc_ich: Resource conflict(s) found affecting gpio_ich
>> [ 4.280990] iTCO_vendor_support: vendor-support=0
>> [ 4.304270] duplicate interface
>> [ 4.307664] ipmi_si: Trying ACPI-specified kcs state machine at i/o
>> address 0xca2, slave address 0x0, irq 0
>> [ 4.318187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>> [ 4.323711] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
>> TCOBASE=0x0460)
>> [ 4.323818] e1000e 0000:00:19.0 eth3: renamed from eth0
>> [ 4.336446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> [ 4.342474] AVX version of gcm_enc/dec engaged.
>> [ 4.346907] AES CTR mode by8 optimization enabled
>> [ 4.351931] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>> [ 4.352819] alg: No test for __gcm-aes-aesni
>> (__driver-gcm-aes-aesni)
>> [ 4.364158] i40e 0000:02:00.1 eth1: renamed from rename5
>> [ 4.370154] [drm] Initialized drm 1.1.0 20060810
>> [ 4.374797] Error: Driver 'pcspkr' is already registered,
>> aborting...
>> [ 4.381228] alg: No test for crc32 (crc32-pclmul)
>> [ 4.395990] [TTM] Zone kernel: Available graphics memory: 16494382
>> kiB
>> [ 4.396626] i40e 0000:02:00.0 eth0: renamed from rename3
>> [ 4.407813] [TTM] Zone dma32: Available graphics memory: 2097152
>> kiB
>> [ 4.414324] [TTM] Initializing pool allocator
>> [ 4.418678] [TTM] Initializing DMA pool allocator
>> [ 4.425605] intel_rapl: Found RAPL domain package
>> [ 4.430215] intel_rapl: Found RAPL domain core
>> [ 4.446166] fbcon: mgadrmfb (fb0) is primary device
>> [ 4.489833] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c,
>> prod_id: 0x0624, dev_id: 0x20)
>> [ 4.489843] ipmi_si 00:0a: IPMI kcs interface initialized
>> [ 4.604074] Console: switching to colour frame buffer device 128x48
>> [ 4.698245] mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer device
>> [ 4.704491] mgag200 0000:06:03.0: registered panic notifier
>> [ 4.733133] [drm] Initialized mgag200 1.0.0 20110418 for
>> 0000:06:03.0 on minor 0
>> [ 4.975874] Adding 3905532k swap on /dev/sda1. Priority:-1
>> extents:1 across:3905532k SSFS
>> [ 5.002394] EXT4-fs (sda2): re-mounted. Opts: (null)
>> [ 5.044749] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>> [ 5.077354] loop: module loaded
>> [ 5.087636] Ethernet Channel Bonding Driver: v3.7.1 (April 27,
>> 2011)
>> [ 5.101990] nf_conntrack version 0.5.0 (17374463 buckets, 138995704
>> max)
>> [ 5.108653] nf_conntrack: falling back to vmalloc.
>> [ 5.735510] random: dd urandom read with 92 bits of entropy
>> available
>> [ 5.927034] bond0: Setting xmit hash policy to layer3+4 (1)
>> [ 5.927105] bond0: Setting MII monitoring interval to 100
>> [ 5.963685] bond0: Setting LACP rate to slow (0)
>> [ 6.119830] bond0: Adding slave eth0
>> [ 6.119841] i40e 0000:02:00.0 eth0: already using mac address
>> 3c:fd:fe:9c:56:b8
>> [ 6.123689] i40e 0000:02:00.0 eth0: NIC Link is Up 10 Gbps Full
>> Duplex, Flow Control: None
>> [ 6.123746] bond0: Enslaving eth0 as a backup interface with an up
>> link
>> [ 6.126208] bond0: Adding slave eth1
>> [ 6.126212] i40e 0000:02:00.1 eth1: set new mac address
>> 3c:fd:fe:9c:56:b8
>> [ 6.135693] i40e 0000:02:00.1 eth1: NIC Link is Up 10 Gbps Full
>> Duplex, Flow Control: None
>> [ 6.135756] bond0: Enslaving eth1 as a backup interface with an up
>> link
>> [ 7.145905] random: nonblocking pool is initialized
>> [ 12.460991] Process accounting resumed
>> [ 12.918920] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> [ 13.021814] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> [ 13.279044] nf_conntrack: falling back to vmalloc.
>> [ 13.323161] ip_tables: (C) 2000-2006 Netfilter Core Team
>>
>> On 2015-08-27 16:43, Rose, Gregory V wrote:
>>>> -----Original Message-----
>>>> From: Christian Ruppert [mailto:***@qasl.de]
>>>> Sent: Thursday, August 27, 2015 4:54 AM
>>>> To: Fujinaka, Todd
>>>> Cc: Rose, Gregory V; e1000-***@lists.sf.net
>>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>>>
>>>> Well, that's it for now anyway...
>>>>
>>>> ...
>>>> Power cycle is required to complete the update process.
>>>> Tool execution completed with the following status: All operations
>>>> completed successfully
>>>>
>>>> The card doesn't even appear in "lspci" anymore... :/ I used a Win7
>>>> to
>>>> flash it since a co-worker already broke one when flashing via
>>>> Linux. No
>>>> idea how to unbrick it.
>>>
>>> Christian,
>>>
>>> I'm very sorry to hear that. It is pretty rare for this sort of
>>> thing
>>> to happen but not unheard of. Please contact ***@intel.com to
>>> get
>>> help replacing the part.
>>>
>>> - Greg
>>>
>>>>
>>>>
>>>> On 2015-08-27 01:25, Fujinaka, Todd wrote:
>>>> > Attachments don't work on this mailing list (though they may have
>>>> > gotten to Greg). Please file a bug on e1000.sourceforge.net and attach
>>>> > the files there.
>>>> >
>>>> > Todd Fujinaka
>>>> > Software Application Engineer
>>>> > Networking Division (ND)
>>>> > Intel Corporation
>>>> > ***@intel.com
>>>> > (503) 712-4565
>>>> >
>>>> > -----Original Message-----
>>>> > From: Christian Ruppert [mailto:***@qasl.de]
>>>> > Sent: Wednesday, August 26, 2015 10:24 AM
>>>> > To: Rose, Gregory V
>>>> > Cc: e1000-***@lists.sf.net
>>>> > Subject: Re: [E1000-devel] X710 / i40e interface resets
>>>> >
>>>> > On 2015-08-26 01:19, Rose, Gregory V wrote:
>>>> >>> -----Original Message-----
>>>> >>> From: Christian Ruppert [mailto:***@qasl.de]
>>>> >>> Sent: Friday, August 21, 2015 7:06 AM
>>>> >>> To: Rose, Gregory V
>>>> >>> Cc: e1000-***@lists.sf.net
>>>> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>>> >>>
>>>> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>>>> >>> >> -----Original Message-----
>>>> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
>>>> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>>>> >>> >> To: Rose, Gregory V
>>>> >>> >> Cc: e1000-***@lists.sf.net
>>>> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>>> >>> >>
>>>> >>
>>>> >> [snip]
>>>> >>
>>>> >>> > I've been told that the Tx driver issue detected message is due to
>>>> >>> > a MDD (Malicious Driver Detection) event. We need to find out what
>>>> >>> > is causing that so if you could please send me your system log and
>>>> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I can
>>>> >>> > see what might be occurring. If not then we'll have to debug
>>>> further.
>>>> >>>
>>>> >>> See the initial Mail for ethtool -k and so on. Also:
>>>> >>> # ethtool eth0
>>>> >>> Settings for eth0:
>>>> >>> Supported ports: [ FIBRE ]
>>>> >>> Supported link modes: 1000baseT/Full
>>>> >>> 10000baseT/Full
>>>> >>> Supported pause frame use: Symmetric
>>>> >>> Supports auto-negotiation: No
>>>> >>> Advertised link modes: 1000baseT/Full
>>>> >>> 10000baseT/Full
>>>> >>> Advertised pause frame use: No
>>>> >>> Advertised auto-negotiation: No
>>>> >>> Speed: 10000Mb/s
>>>> >>> Duplex: Full
>>>> >>> Port: FIBRE
>>>> >>> PHYAD: 0
>>>> >>> Transceiver: external
>>>> >>> Auto-negotiation: off
>>>> >>> Supports Wake-on: d
>>>> >>> Wake-on: d
>>>> >>> Current message level: 0x0000000f (15)
>>>> >>> drv probe link timer
>>>> >>> Link detected: yes
>>>> >>> # ethtool -i eth0
>>>> >>> driver: i40e
>>>> >>> version: 1.2.48
>>>> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>>>> >>> bus-info: 0000:02:00.0
>>>> >>> supports-statistics: yes
>>>> >>> supports-test: yes
>>>> >>> supports-eeprom-access: yes
>>>> >>> supports-register-dump: yes
>>>> >>> supports-priv-flags: yes
>>>> >>
>>>> >> I also need the output of 'dmesg' - and I need to figure out how to
>>>> >> determine what specific MDD event is occurring. I'll get back to you
>>>> >> with instructions on how to do that when I get the system log from
>>>> >> you.
>>>> >
>>>> > See the attached file. It's a dmesg from boot + some minutes.
>>>> > I'll upgrade the card's firmware tomorrow I guess and try out the new
>>>> > drivers btw.
>>>> >
>>>> >>
>>>> >> Thanks,
>>>> >>
>>>> >> - Greg
>>>> >
>>>> > --
>>>> > Regards,
>>>> > Christian Ruppert
>>>>
>>>> --
>>>> Regards,
>>>> Christian Ruppert

--
Regards,
Christian Ruppert
Christian Ruppert
2015-10-07 15:00:16 UTC
Permalink
On 2015-10-07 16:14, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Wednesday, October 07, 2015 12:59 AM
>> To: Rose, Gregory V
>> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> Is there anything else I can do to help to get that debugged/fixed?
>> We upgraded the connection from 1G to 10G btw (it was 1G before).
>
> We'll need to get a setup to reproduce the problem so we can debug it.
> Can you provide that information? Or perhaps you've provided it
> before and I'm just not seeing it? If that's the case can you point
> me to it again?
>
> Thanks,
>
> - Greg

Hi Greg,

in this case it's a Supermicro 5017C-MTF (X9SCL/X9SCM) using a X710 10GE
card, both ports connected to 10GE switch ports (LACP).
WAN->Router->Swich->Host
The host in this case acts as a loadbalancer using e.g. Varnish and
HAProxy and doing mostly HTTP traffic (also SSL termination).
Do you need anything else?

>
>>
>> On 2015-09-28 16:53, Christian Ruppert wrote:
>> > And there we go:
>> >
>> > [77571.409182] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [77572.245943] bond0: link status up again after 0 ms for interface
>> > eth1
>> > [94412.738896] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [94413.569379] bond0: link status up again after 0 ms for interface
>> > eth1
>> > [94516.443592] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [94516.718341] bond0: link status up again after 0 ms for interface
>> > eth1
>> > [96850.580882] i40e 0000:02:00.0: TX driver issue detected, PF reset
>> > issued
>> > [96851.036998] bond0: link status up again after 0 ms for interface
>> > eth0
>> > [96939.474122] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [96940.217799] bond0: link status up again after 0 ms for interface
>> > eth1
>> > [96945.007365] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [96945.225029] bond0: link status up again after 0 ms for interface
>> > eth1
>> > [96965.362669] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [96966.255350] bond0: link status up again after 0 ms for interface
>> > eth1
>> > [99844.991331] i40e 0000:02:00.0: TX driver issue detected, PF reset
>> > issued
>> > [99845.360288] bond0: link status up again after 0 ms for interface
>> > eth0
>> > [159908.054220] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [159909.165679] bond0: link status up again after 0 ms for interface
>> > eth1
>> > [329531.138706] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> > issued
>> > [329532.167421] bond0: link status up again after 0 ms for interface
>> > eth1
>> >
>> > On 2015-09-25 16:19, Christian Ruppert wrote:
>> >> Hi,
>> >>
>> >> the card came back and I had to flash it again but it worked perfectly
>> >> fine this time :)
>> >> So I setup a new Kernel (3.18.20) and the most recent i40e driver
>> >> (1.3.39.1) and removed the previous workaround to disable ntuples on
>> >> both interfaces. So basically a vanilla setup.
>> >> That host is up for several hours no and there was no spam so far and
>> >> only one reset yet:
>> >> Sep 25 12:38:54 somehost kernel: [77571.409182] i40e 0000:02:00.1: TX
>> >> driver issue detected, PF reset issued
>> >> Sep 25 12:38:55 somehost kernel: [77572.245943] bond0: link status up
>> >> again after 0 ms for interface eth1
>> >>
>> >> and here's the requested dmesg again:
>> >> [ 0.000000] Initializing cgroup subsys cpuset
>> >> [ 0.000000] Initializing cgroup subsys cpu
>> >> [ 0.000000] Initializing cgroup subsys cpuacct
>> >> [ 0.000000] Linux version 3.18.20 (***@somehost) (gcc version 4.7.2
>> >> (Debian 4.7.2-5) ) #1 SMP Wed Aug 26 14:25:15 CEST 2015
>> >> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>> >> [ 0.000000] e820: BIOS-provided physical RAM map:
>> >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff]
>> >> usable
>> >> [ 0.000000] BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000becc8fff]
>> >> usable
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000becc9000-0x00000000bed0bfff]
>> >> ACPI NVS
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000bed0c000-0x00000000ce491fff]
>> >> usable
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce492000-0x00000000ce534fff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce535000-0x00000000ce5c6fff]
>> >> usable
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce5c7000-0x00000000ce68bfff]
>> >> ACPI NVS
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce68c000-0x00000000cf7fefff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
>> >> usable
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
>> >> reserved
>> >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff]
>> >> usable
>> >> [ 0.000000] console [earlyser0] enabled
>> >> [ 0.000000] NX (Execute Disable) protection: active
>> >> [ 0.000000] SMBIOS 2.7 present.
>> >> [ 0.000000] DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2
>> >> 02/20/2015
>> >> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
>> >> reserved
>> >> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>> >> [ 0.000000] AGP: No AGP bridge found
>> >> [ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
>> >> [ 0.000000] MTRR default type: uncachable
>> >> [ 0.000000] MTRR fixed ranges enabled:
>> >> [ 0.000000] 00000-9FFFF write-back
>> >> [ 0.000000] A0000-BFFFF uncachable
>> >> [ 0.000000] C0000-CBFFF write-protect
>> >> [ 0.000000] CC000-E7FFF uncachable
>> >> [ 0.000000] E8000-FFFFF write-protect
>> >> [ 0.000000] MTRR variable ranges enabled:
>> >> [ 0.000000] 0 base 000000000 mask 800000000 write-back
>> >> [ 0.000000] 1 base 800000000 mask FE0000000 write-back
>> >> [ 0.000000] 2 base 820000000 mask FF0000000 write-back
>> >> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
>> >> [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
>> >> [ 0.000000] 5 disabled
>> >> [ 0.000000] 6 disabled
>> >> [ 0.000000] 7 disabled
>> >> [ 0.000000] 8 disabled
>> >> [ 0.000000] 9 disabled
>> >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
>> >> 0x7010600070106
>> >> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
>> >> reserved
>> >> [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
>> >> [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf]
>> >> mapped at [ffff8800000fd7b0]
>> >> [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size
>> >> 24576
>> >> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>> >> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
>> >> [ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
>> >> [ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
>> >> [ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
>> >> [ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
>> >> [ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M
>> >> [ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
>> >> [ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
>> >> [ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M
>> >> [ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff]
>> >> [ 0.000000] [mem 0x800000000-0x82bffffff] page 2M
>> >> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbecc8fff]
>> >> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
>> >> [ 0.000000] [mem 0x00200000-0xbebfffff] page 2M
>> >> [ 0.000000] [mem 0xbec00000-0xbecc8fff] page 4k
>> >> [ 0.000000] init_memory_mapping: [mem 0xbed0c000-0xce491fff]
>> >> [ 0.000000] [mem 0xbed0c000-0xbedfffff] page 4k
>> >> [ 0.000000] [mem 0xbee00000-0xce3fffff] page 2M
>> >> [ 0.000000] [mem 0xce400000-0xce491fff] page 4k
>> >> [ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
>> >> [ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
>> >> [ 0.000000] init_memory_mapping: [mem 0xce535000-0xce5c6fff]
>> >> [ 0.000000] [mem 0xce535000-0xce5c6fff] page 4k
>> >> [ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
>> >> [ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
>> >> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
>> >> [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
>> >> [ 0.000000] RAMDISK: [mem 0x360c0000-0x37057fff]
>> >> [ 0.000000] ACPI: Early table checksum verification disabled
>> >> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
>> >> [ 0.000000] ACPI: XSDT 0x00000000CE64F088 00008C (v01 SUPERM
>> >> SMCI--MB 00000001 AMI 00010013)
>> >> [ 0.000000] ACPI: FACP 0x00000000CE65A210 00010C (v05 SUPERM
>> >> SMCI--MB 00000001 AMI 00010013)
>> >> [ 0.000000] ACPI: DSDT 0x00000000CE64F1A8 00B068 (v02 SUPERM
>> >> SMCI--MB 00000000 INTL 20051117)
>> >> [ 0.000000] ACPI: FACS 0x00000000CE68A080 000040
>> >> [ 0.000000] ACPI: APIC 0x00000000CE65A320 000092 (v03 SUPERM
>> >> SMCI--MB 00000001 AMI 00010013)
>> >> [ 0.000000] ACPI: FPDT 0x00000000CE65A3B8 000044 (v01 SUPERM
>> >> SMCI--MB 00000001 AMI 00010013)
>> >> [ 0.000000] ACPI: MCFG 0x00000000CE65A400 00003C (v01 SUPERM
>> >> SMCI--MB 00000001 MSFT 00000097)
>> >> [ 0.000000] ACPI: HPET 0x00000000CE65A440 000038 (v01 SUPERM
>> >> SMCI--MB 00000001 AMI. 00000005)
>> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A478 000397 (v01 SataRe
>> >> SataTabl 00001000 INTL 20091112)
>> >> [ 0.000000] ACPI: SPMI 0x00000000CE65A810 000040 (v05 A M I
>> >> OEMSPMI 00000000 AMI. 00000000)
>> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A850 0009A4 (v01 PmRef
>> >> Cpu0Ist 00003000 INTL 20051117)
>> >> [ 0.000000] ACPI: SSDT 0x00000000CE65B1F8 000B18 (v01 PmRef CpuPm
>> >> 00003000 INTL 20051117)
>> >> [ 0.000000] ACPI: EINJ 0x00000000CE65BD10 000130 (v01 AMI AMI
>> >> EINJ 00000000 00000000)
>> >> [ 0.000000] ACPI: ERST 0x00000000CE65BE40 000210 (v01 AMIER AMI
>> >> ERST 00000000 00000000)
>> >> [ 0.000000] ACPI: HEST 0x00000000CE65C050 0000A8 (v01 AMI AMI
>> >> HEST 00000000 00000000)
>> >> [ 0.000000] ACPI: BERT 0x00000000CE65C0F8 000030 (v01 AMI AMI
>> >> BERT 00000000 00000000)
>> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> >> [ 0.000000] No NUMA configuration found
>> >> [ 0.000000] Faking a node at [mem
>> >> 0x0000000000000000-0x000000082fffffff]
>> >> [ 0.000000] NODE_DATA(0) allocated [mem 0x82ffdc000-0x82ffdffff]
>> >> [ 0.000000] [ffffea0000000000-ffffea001cbfffff] PMD ->
>> >> [ffff88080f600000-ffff88082b7fffff] on node 0
>> >> [ 0.000000] Zone ranges:
>> >> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>> >> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
>> >> [ 0.000000] Normal [mem 0x100000000-0x82fffffff]
>> >> [ 0.000000] Movable zone start for each node
>> >> [ 0.000000] Early memory node ranges
>> >> [ 0.000000] node 0: [mem 0x00001000-0x00098fff]
>> >> [ 0.000000] node 0: [mem 0x00100000-0xbecc8fff]
>> >> [ 0.000000] node 0: [mem 0xbed0c000-0xce491fff]
>> >> [ 0.000000] node 0: [mem 0xce535000-0xce5c6fff]
>> >> [ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
>> >> [ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
>> >> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x82fffffff]
>> >> [ 0.000000] On node 0 totalpages: 8381562
>> >> [ 0.000000] DMA zone: 56 pages used for memmap
>> >> [ 0.000000] DMA zone: 21 pages reserved
>> >> [ 0.000000] DMA zone: 3992 pages, LIFO batch:0
>> >> [ 0.000000] DMA32 zone: 11498 pages used for memmap
>> >> [ 0.000000] DMA32 zone: 840930 pages, LIFO batch:31
>> >> [ 0.000000] Normal zone: 103040 pages used for memmap
>> >> [ 0.000000] Normal zone: 7536640 pages, LIFO batch:31
>> >> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>> >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>> >> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> >> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
>> >> GSI 0-23
>> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
>> >> dfl)
>> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>> >> level)
>> >> [ 0.000000] ACPI: IRQ0 used by override.
>> >> [ 0.000000] ACPI: IRQ9 used by override.
>> >> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> >> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>> >> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0x00000000-0x00000fff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0x00099000-0x00099fff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0x0009a000-0x0009ffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0x000a0000-0x000dffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0x000e0000-0x000fffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xbecc9000-0xbed0bfff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xce492000-0xce534fff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xce5c7000-0xce68bfff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xce68c000-0xcf7fefff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xcf800000-0xdfffffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xe0000000-0xefffffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xf0000000-0xfebfffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfec00000-0xfec00fff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfec01000-0xfecfffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfed00000-0xfed03fff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfed04000-0xfed1bfff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfed1c000-0xfed1ffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfed20000-0xfedfffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfee00000-0xfee00fff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xfee01000-0xfeffffff]
>> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> 0xff000000-0xffffffff]
>> >> [ 0.000000] e820: [mem 0xcf800000-0xdfffffff] available for PCI
>> >> devices
>> >> [ 0.000000] Booting paravirtualized kernel on bare hardware
>> >> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
>> >> nr_cpu_ids:8 nr_node_ids:1
>> >> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s80960
>> >> r8192 d29632 u262144
>> >> [ 0.000000] pcpu-alloc: s80960 r8192 d29632 u262144 alloc=1*2097152
>> >> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>> >> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
>> >> Total pages: 8266947
>> >> [ 0.000000] Policy zone: Normal
>> >> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>> >> [ 0.000000] Intel-IOMMU: disabled
>> >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> >> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
>> >> standard form
>> >> [ 0.000000] AGP: Checking aperture...
>> >> [ 0.000000] AGP: No AGP bridge found
>> >> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
>> >> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
>> >> bailing!
>> >> [ 0.000000] Memory: 32970712K/33526248K available (5512K kernel
>> >> code, 966K rwdata, 1832K rodata, 1228K init, 852K bss, 555536K
>> >> reserved)
>> >> [ 0.000000] Hierarchical RCU implementation.
>> >> [ 0.000000] RCU dyntick-idle grace-period acceleration is
>> enabled.
>> >> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to
>> nr_cpu_ids=8.
>> >> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
>> >> nr_cpu_ids=8
>> >> [ 0.000000] NR_IRQS:33024 nr_irqs:488 0
>> >> [ 0.000000] Console: colour VGA+ 80x25
>> >> [ 0.000000] console [tty0] enabled
>> >> [ 0.000000] allocated 134217728 bytes of page_cgroup
>> >> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
>> >> want memory cgroups
>> >> [ 0.000000] hpet clockevent registered
>> >> [ 0.000000] tsc: Fast TSC calibration failed
>> >> [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
>> >> [ 0.000000] tsc: Detected 3499.669 MHz processor
>> >> [ 0.000025] Calibrating delay loop (skipped), value calculated
>> >> using timer frequency.. 6999.33 BogoMIPS (lpj=13998676)
>> >> [ 0.010617] pid_max: default: 32768 minimum: 301
>> >> [ 0.015230] ACPI: Core revision 20140926
>> >> [ 0.024681] ACPI: All ACPI Tables successfully acquired
>> >> [ 0.039606] Security Framework initialized
>> >> [ 0.043611] AppArmor: AppArmor disabled by boot time parameter
>> >> [ 0.049421] Yama: becoming mindful.
>> >> [ 0.054266] Dentry cache hash table entries: 4194304 (order: 13,
>> >> 33554432 bytes)
>> >> [ 0.067119] Inode-cache hash table entries: 2097152 (order: 12,
>> >> 16777216 bytes)
>> >> [ 0.076825] Mount-cache hash table entries: 65536 (order: 7, 524288
>> >> bytes)
>> >> [ 0.083636] Mountpoint-cache hash table entries: 65536 (order: 7,
>> >> 524288 bytes)
>> >> [ 0.091133] Initializing cgroup subsys memory
>> >> [ 0.095401] Initializing cgroup subsys devices
>> >> [ 0.099824] Initializing cgroup subsys freezer
>> >> [ 0.104249] Initializing cgroup subsys net_cls
>> >> [ 0.108676] Initializing cgroup subsys blkio
>> >> [ 0.112929] Initializing cgroup subsys perf_event
>> >> [ 0.117615] Initializing cgroup subsys net_prio
>> >> [ 0.122145] CPU: Physical Processor ID: 0
>> >> [ 0.126120] CPU: Processor Core ID: 0
>> >> [ 0.129769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>> >> [ 0.129769] ENERGY_PERF_BIAS: View and update with
>> >> x86_energy_perf_policy(8)
>> >> [ 0.143037] mce: CPU supports 9 MCE banks
>> >> [ 0.146959] CPU0: Thermal monitoring enabled (TM1)
>> >> [ 0.151728] process: using mwait in idle threads
>> >> [ 0.156328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>> >> [ 0.156328] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>> >> [ 0.168125] Freeing SMP alternatives memory: 20K (ffffffff81a26000
>> >> - ffffffff81a2b000)
>> >> [ 0.176733] ftrace: allocating 22083 entries in 87 pages
>> >> [ 0.197324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> >> [ 0.242968] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 V2 @
>> >> 3.50GHz (fam: 06, model: 3a, stepping: 09)
>> >> [ 0.252247] TSC deadline timer enabled
>> >> [ 0.252264] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge
>> >> events, full-width counters, Intel PMU driver.
>> >> [ 0.262484] ... version: 3
>> >> [ 0.266477] ... bit width: 48
>> >> [ 0.270555] ... generic registers: 4
>> >> [ 0.274548] ... value mask: 0000ffffffffffff
>> >> [ 0.279843] ... max period: 0000ffffffffffff
>> >> [ 0.285137] ... fixed-purpose events: 3
>> >> [ 0.289130] ... event mask: 000000070000000f
>> >> [ 0.295409] x86: Booting SMP configuration:
>> >> [ 0.299494] .... node #0, CPUs: #1
>> >> [ 0.316534] NMI watchdog: enabled on all CPUs, permanently consumes
>> >> one hw-PMU counter.
>> >> [ 0.324669] #2 #3 #4 #5 #6 #7
>> >> [ 0.407240] x86: Booted up 1 node, 8 CPUs
>> >> [ 0.411319] smpboot: Total of 8 processors activated (55994.70
>> >> BogoMIPS)
>> >> [ 0.424047] devtmpfs: initialized
>> >> [ 0.430926] PM: Registering ACPI NVS region [mem
>> >> 0xbecc9000-0xbed0bfff] (274432 bytes)
>> >> [ 0.438777] PM: Registering ACPI NVS region [mem
>> >> 0xce5c7000-0xce68bfff] (806912 bytes)
>> >> [ 0.447304] pinctrl core: initialized pinctrl subsystem
>> >> [ 0.452519] NET: Registered protocol family 16
>> >> [ 0.468890] cpuidle: using governor ladder
>> >> [ 0.488929] cpuidle: using governor menu
>> >> [ 0.492803] ACPI FADT declares the system doesn't support PCIe
>> >> ASPM, so disable it
>> >> [ 0.500309] ACPI: bus type PCI registered
>> >> [ 0.504301] acpiphp: ACPI Hot Plug PCI Controller Driver version:
>> >> 0.5
>> >> [ 0.510784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>> >> 0xe0000000-0xefffffff] (base 0xe0000000)
>> >> [ 0.520010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
>> >> in E820
>> >> [ 0.526980] PCI: Using configuration type 1 for base access
>> >> [ 0.544821] ACPI: Added _OSI(Module Device)
>> >> [ 0.548905] ACPI: Added _OSI(Processor Device)
>> >> [ 0.553330] ACPI: Added _OSI(3.0 _SCP Extensions)
>> >> [ 0.558017] ACPI: Added _OSI(Processor Aggregator Device)
>> >> [ 0.565243] ACPI: Executed 1 blocks of module-level executable AML
>> >> code
>> >> [ 0.739624] \_SB_:_OSC invalid UUID
>> >> [ 0.739625] _OSC request data:1 1f
>> >> [ 0.739811] ACPI: Dynamic OEM Table Load:
>> >> [ 0.743707] ACPI: SSDT 0xFFFF880807B5C000 00083B (v01 PmRef
>> >> Cpu0Cst 00003001 INTL 20051117)
>> >> [ 0.764280] ACPI: Dynamic OEM Table Load:
>> >> [ 0.768173] ACPI: SSDT 0xFFFF880807049C00 000303 (v01 PmRef ApIst
>> >> 00003000 INTL 20051117)
>> >> [ 0.788649] ACPI: Dynamic OEM Table Load:
>> >> [ 0.792543] ACPI: SSDT 0xFFFF880807007C00 000119 (v01 PmRef ApCst
>> >> 00003000 INTL 20051117)
>> >> [ 0.813761] ACPI: Interpreter enabled
>> >> [ 0.817329] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>> >> State [\_S2_] (20140926/hwxface-580)
>> >> [ 0.826523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>> >> State [\_S3_] (20140926/hwxface-580)
>> >> [ 0.835727] ACPI: (supports S0 S1 S4 S5)
>> >> [ 0.839628] ACPI: Using IOAPIC for interrupt routing
>> >> [ 0.844615] HEST: Table parsing has been initialized.
>> >> [ 0.849610] PCI: Using host bridge windows from ACPI; if necessary,
>> >> use "pci=nocrs" and report a bug
>> >> [ 0.863689] ACPI: Power Resource [FN00] (off)
>> >> [ 0.868006] ACPI: Power Resource [FN01] (off)
>> >> [ 0.872344] ACPI: Power Resource [FN02] (off)
>> >> [ 0.876682] ACPI: Power Resource [FN03] (off)
>> >> [ 0.881022] ACPI: Power Resource [FN04] (off)
>> >> [ 0.885681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>> >> [ 0.891767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
>> >> ClockPM Segments MSI]
>> >> [ 0.900002] acpi PNP0A08:00: _OSC: platform does not support
>> >> [PCIeHotplug PME]
>> >> [ 0.907216] acpi PNP0A08:00: _OSC: OS now controls [AER
>> >> PCIeCapability]
>> >> [ 0.914173] PCI host bridge to bus 0000:00
>> >> [ 0.918169] pci_bus 0000:00: root bus resource [bus 00-fe]
>> >> [ 0.923636] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
>> >> [ 0.929798] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
>> >> [ 0.935959] pci_bus 0000:00: root bus resource [mem
>> >> 0x000a0000-0x000bffff]
>> >> [ 0.942817] pci_bus 0000:00: root bus resource [mem
>> >> 0x000cc000-0x000cffff]
>> >> [ 0.949673] pci_bus 0000:00: root bus resource [mem
>> >> 0x000d0000-0x000d3fff]
>> >> [ 0.956530] pci_bus 0000:00: root bus resource [mem
>> >> 0x000d4000-0x000d7fff]
>> >> [ 0.963386] pci_bus 0000:00: root bus resource [mem
>> >> 0x000d8000-0x000dbfff]
>> >> [ 0.970243] pci_bus 0000:00: root bus resource [mem
>> >> 0x000dc000-0x000dffff]
>> >> [ 0.977101] pci_bus 0000:00: root bus resource [mem
>> >> 0x000e0000-0x000e3fff]
>> >> [ 0.983957] pci_bus 0000:00: root bus resource [mem
>> >> 0x000e4000-0x000e7fff]
>> >> [ 0.990814] pci_bus 0000:00: root bus resource [mem
>> >> 0xd0000000-0xfeafffff]
>> >> [ 0.997674] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
>> >> [ 0.997751] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
>> >> [ 0.997831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>> >> [ 0.997870] pci 0000:00:01.0: System wakeup disabled by ACPI
>> >> [ 1.003450] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
>> >> [ 1.003473] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
>> >> [ 1.003502] pci 0000:00:01.1: System wakeup disabled by ACPI
>> >> [ 1.009121] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>> >> [ 1.009138] pci 0000:00:19.0: reg 0x10: [mem 0xdfb00000-0xdfb1ffff]
>> >> [ 1.009145] pci 0000:00:19.0: reg 0x14: [mem 0xdfb25000-0xdfb25fff]
>> >> [ 1.009153] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
>> >> [ 1.009212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>> >> [ 1.009246] pci 0000:00:19.0: System wakeup disabled by ACPI
>> >> [ 1.014835] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>> >> [ 1.014854] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb24000-0xdfb243ff]
>> >> [ 1.014938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>> >> [ 1.014983] pci 0000:00:1a.0: System wakeup disabled by ACPI
>> >> [ 1.020571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>> >> [ 1.020648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> >> [ 1.020686] pci 0000:00:1c.0: System wakeup disabled by ACPI
>> >> [ 1.026274] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
>> >> [ 1.026351] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>> >> [ 1.026388] pci 0000:00:1c.4: System wakeup disabled by ACPI
>> >> [ 1.031981] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>> >> [ 1.032000] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb23000-0xdfb233ff]
>> >> [ 1.032084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>> >> [ 1.032129] pci 0000:00:1d.0: System wakeup disabled by ACPI
>> >> [ 1.037718] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>> >> [ 1.037791] pci 0000:00:1e.0: System wakeup disabled by ACPI
>> >> [ 1.043379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
>> >> [ 1.043532] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>> >> [ 1.043549] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
>> >> [ 1.043556] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
>> >> [ 1.043563] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
>> >> [ 1.043570] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
>> >> [ 1.043577] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
>> >> [ 1.043584] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb22000-0xdfb227ff]
>> >> [ 1.043625] pci 0000:00:1f.2: PME# supported from D3hot
>> >> [ 1.043684] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>> >> [ 1.043697] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb21000-0xdfb210ff
>> >> 64bit]
>> >> [ 1.043716] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
>> >> [ 1.043832] pci 0000:00:01.0: PCI bridge to [bus 01]
>> >> [ 1.048735] pci 0000:02:00.0: [8086:1572] type 00 class 0x020000
>> >> [ 1.048745] pci 0000:02:00.0: reg 0x10: [mem 0xdd800000-0xddffffff
>> >> 64bit pref]
>> >> [ 1.048755] pci 0000:02:00.0: reg 0x1c: [mem 0xde808000-0xde80ffff
>> >> 64bit pref]
>> >> [ 1.048764] pci 0000:02:00.0: reg 0x30: [mem 0xdfa80000-0xdfafffff
>> >> pref]
>> >> [ 1.048800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>> >> [ 1.048818] pci 0000:02:00.0: reg 0x184: [mem 0xde400000-0xde40ffff
>> >> 64bit pref]
>> >> [ 1.048827] pci 0000:02:00.0: reg 0x190: [mem 0xde910000-0xde913fff
>> >> 64bit pref]
>> >> [ 1.048862] pci 0000:02:00.1: [8086:1572] type 00 class 0x020000
>> >> [ 1.048872] pci 0000:02:00.1: reg 0x10: [mem 0xdd000000-0xdd7fffff
>> >> 64bit pref]
>> >> [ 1.048882] pci 0000:02:00.1: reg 0x1c: [mem 0xde800000-0xde807fff
>> >> 64bit pref]
>> >> [ 1.048891] pci 0000:02:00.1: reg 0x30: [mem 0xdfa00000-0xdfa7ffff
>> >> pref]
>> >> [ 1.048925] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
>> >> [ 1.048942] pci 0000:02:00.1: reg 0x184: [mem 0xde000000-0xde00ffff
>> >> 64bit pref]
>> >> [ 1.048951] pci 0000:02:00.1: reg 0x190: [mem 0xde810000-0xde813fff
>> >> 64bit pref]
>> >> [ 1.056725] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>> >> [ 1.061856] pci 0000:00:01.1: bridge window [mem
>> >> 0xdfa00000-0xdfafffff]
>> >> [ 1.061858] pci 0000:00:01.1: bridge window [mem
>> >> 0xdd000000-0xdeafffff 64bit pref]
>> >> [ 1.061915] pci 0000:00:1c.0: PCI bridge to [bus 04]
>> >> [ 1.066903] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
>> >> [ 1.066942] pci 0000:05:00.0: reg 0x10: [mem 0xdf900000-0xdf91ffff]
>> >> [ 1.066987] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
>> >> [ 1.067010] pci 0000:05:00.0: reg 0x1c: [mem 0xdf920000-0xdf923fff]
>> >> [ 1.067239] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
>> >> [ 1.067289] pci 0000:05:00.0: System wakeup disabled by ACPI
>> >> [ 1.080881] pci 0000:00:1c.4: PCI bridge to [bus 05]
>> >> [ 1.085759] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>> >> [ 1.085762] pci 0000:00:1c.4: bridge window [mem
>> >> 0xdf900000-0xdf9fffff]
>> >> [ 1.085807] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
>> >> [ 1.085822] pci 0000:06:03.0: reg 0x10: [mem 0xdc000000-0xdcffffff
>> >> pref]
>> >> [ 1.085831] pci 0000:06:03.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
>> >> [ 1.085839] pci 0000:06:03.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
>> >> [ 1.085948] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive
>> >> decode)
>> >> [ 1.092645] pci 0000:00:1e.0: bridge window [mem
>> >> 0xdf000000-0xdf8fffff]
>> >> [ 1.092650] pci 0000:00:1e.0: bridge window [mem
>> >> 0xdc000000-0xdcffffff 64bit pref]
>> >> [ 1.092651] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
>> >> (subtractive decode)
>> >> [ 1.092652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
>> >> (subtractive decode)
>> >> [ 1.092653] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000a0000-0x000bffff] (subtractive decode)
>> >> [ 1.092655] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000cc000-0x000cffff] (subtractive decode)
>> >> [ 1.092656] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000d0000-0x000d3fff] (subtractive decode)
>> >> [ 1.092657] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000d4000-0x000d7fff] (subtractive decode)
>> >> [ 1.092658] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000d8000-0x000dbfff] (subtractive decode)
>> >> [ 1.092659] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000dc000-0x000dffff] (subtractive decode)
>> >> [ 1.092660] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000e0000-0x000e3fff] (subtractive decode)
>> >> [ 1.092661] pci 0000:00:1e.0: bridge window [mem
>> >> 0x000e4000-0x000e7fff] (subtractive decode)
>> >> [ 1.092662] pci 0000:00:1e.0: bridge window [mem
>> >> 0xd0000000-0xfeafffff] (subtractive decode)
>> >> [ 1.092690] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
>> >> unsupported)
>> >> [ 1.100314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
>> >> 14 15)
>> >> [ 1.107107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12
>> >> 14 15)
>> >> [ 1.113962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12
>> >> 14 15)
>> >> [ 1.120818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12
>> >> 14 15)
>> >> [ 1.127675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12
>> >> 14 15)
>> >> [ 1.134531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
>> >> 14 15) *0, disabled.
>> >> [ 1.142515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12
>> >> 14 15) *0, disabled.
>> >> [ 1.150505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12
>> >> 14 15)
>> >> [ 1.157484] ACPI: Enabled 4 GPEs in block 00 to 3F
>> >> [ 1.162221] vgaarb: setting as boot device: PCI:0000:06:03.0
>> >> [ 1.167794] vgaarb: device added:
>> >> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
>> >> [ 1.175867] vgaarb: loaded
>> >> [ 1.178556] vgaarb: bridge control possible 0000:06:03.0
>> >> [ 1.183909] PCI: Using ACPI for IRQ routing
>> >> [ 1.193792] PCI: pci_cache_line_size set to 64 bytes
>> >> [ 1.193833] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
>> >> [ 1.193834] e820: reserve RAM buffer [mem 0xbecc9000-0xbfffffff]
>> >> [ 1.193835] e820: reserve RAM buffer [mem 0xce492000-0xcfffffff]
>> >> [ 1.193836] e820: reserve RAM buffer [mem 0xce5c7000-0xcfffffff]
>> >> [ 1.193837] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
>> >> [ 1.193935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>> >> [ 1.199994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>> >> [ 1.207831] Switched to clocksource hpet
>> >> [ 1.215086] pnp: PnP ACPI init
>> >> [ 1.218096] system 00:00: [mem 0xfed40000-0xfed44fff] has been
>> >> reserved
>> >> [ 1.224641] system 00:00: Plug and Play ACPI device, IDs PNP0c01
>> >> (active)
>> >> [ 1.224688] system 00:01: [io 0x0680-0x069f] has been reserved
>> >> [ 1.230542] system 00:01: [io 0x1000-0x100f] has been reserved
>> >> [ 1.236442] system 00:01: [io 0xffff] has been reserved
>> >> [ 1.241736] system 00:01: [io 0xffff] has been reserved
>> >> [ 1.247031] system 00:01: [io 0x0400-0x0453] could not be reserved
>> >> [ 1.253282] system 00:01: [io 0x0458-0x047f] has been reserved
>> >> [ 1.259182] system 00:01: [io 0x0500-0x057f] has been reserved
>> >> [ 1.265084] system 00:01: [io 0x164e-0x164f] has been reserved
>> >> [ 1.270987] system 00:01: Plug and Play ACPI device, IDs PNP0c02
>> >> (active)
>> >> [ 1.271008] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
>> >> (active)
>> >> [ 1.271039] system 00:03: [io 0x0454-0x0457] has been reserved
>> >> [ 1.276891] system 00:03: Plug and Play ACPI device, IDs INT3f0d
>> >> PNP0c02 (active)
>> >> [ 1.276924] system 00:04: [io 0x04d0-0x04d1] has been reserved
>> >> [ 1.282792] system 00:04: Plug and Play ACPI device, IDs PNP0c02
>> >> (active)
>> >> [ 1.282868] system 00:05: [io 0x0a00-0x0a1f] has been reserved
>> >> [ 1.288693] system 00:05: [io 0x0a30-0x0a3f] has been reserved
>> >> [ 1.294594] system 00:05: Plug and Play ACPI device, IDs PNP0c02
>> >> (active)
>> >> [ 1.294751] pnp 00:06: [dma 0 disabled]
>> >> [ 1.294780] pnp 00:06: Plug and Play ACPI device, IDs PNP0501
>> >> (active)
>> >> [ 1.294921] pnp 00:07: [dma 0 disabled]
>> >> [ 1.294947] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
>> >> (active)
>> >> [ 1.295019] system 00:08: [io 0x0b00-0x0b7f] has been reserved
>> >> [ 1.300845] system 00:08: Plug and Play ACPI device, IDs PNP0c02
>> >> (active)
>> >> [ 1.300958] pnp 00:09: [dma 0 disabled]
>> >> [ 1.300985] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
>> >> (active)
>> >> [ 1.301064] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001
>> >> (active)
>> >> [ 1.301198] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been
>> >> reserved
>> >> [ 1.307720] system 00:0b: [mem 0xfed10000-0xfed17fff] has been
>> >> reserved
>> >> [ 1.314314] system 00:0b: [mem 0xfed18000-0xfed18fff] has been
>> >> reserved
>> >> [ 1.320909] system 00:0b: [mem 0xfed19000-0xfed19fff] has been
>> >> reserved
>> >> [ 1.327506] system 00:0b: [mem 0xe0000000-0xefffffff] has been
>> >> reserved
>> >> [ 1.334102] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been
>> >> reserved
>> >> [ 1.340701] system 00:0b: [mem 0xfed90000-0xfed93fff] has been
>> >> reserved
>> >> [ 1.347295] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been
>> >> reserved
>> >> [ 1.353892] system 00:0b: [mem 0xff000000-0xffffffff] has been
>> >> reserved
>> >> [ 1.360488] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
>> >> reserved
>> >> [ 1.367430] system 00:0b: [mem 0xd0000000-0xd0000fff] has been
>> >> reserved
>> >> [ 1.374027] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
>> >> (active)
>> >> [ 1.374113] pnp: PnP ACPI: found 12 devices
>> >> [ 1.384167] pci 0000:00:01.0: PCI bridge to [bus 01]
>> >> [ 1.389053] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>> >> [ 1.394250] pci 0000:00:01.1: bridge window [mem
>> >> 0xdfa00000-0xdfafffff]
>> >> [ 1.401020] pci 0000:00:01.1: bridge window [mem
>> >> 0xdd000000-0xdeafffff 64bit pref]
>> >> [ 1.408745] pci 0000:00:1c.0: PCI bridge to [bus 04]
>> >> [ 1.413701] pci 0000:00:1c.4: PCI bridge to [bus 05]
>> >> [ 1.418641] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>> >> [ 1.424718] pci 0000:00:1c.4: bridge window [mem
>> >> 0xdf900000-0xdf9fffff]
>> >> [ 1.431489] pci 0000:00:1e.0: PCI bridge to [bus 06]
>> >> [ 1.436435] pci 0000:00:1e.0: bridge window [mem
>> >> 0xdf000000-0xdf8fffff]
>> >> [ 1.443203] pci 0000:00:1e.0: bridge window [mem
>> >> 0xdc000000-0xdcffffff 64bit pref]
>> >> [ 1.450929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>> >> [ 1.450931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>> >> [ 1.450932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> >> [ 1.450933] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
>> >> [ 1.450934] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
>> >> [ 1.450935] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
>> >> [ 1.450936] pci_bus 0000:00: resource 10 [mem
>> >> 0x000d8000-0x000dbfff]
>> >> [ 1.450937] pci_bus 0000:00: resource 11 [mem
>> >> 0x000dc000-0x000dffff]
>> >> [ 1.450938] pci_bus 0000:00: resource 12 [mem
>> >> 0x000e0000-0x000e3fff]
>> >> [ 1.450939] pci_bus 0000:00: resource 13 [mem
>> >> 0x000e4000-0x000e7fff]
>> >> [ 1.450940] pci_bus 0000:00: resource 14 [mem
>> >> 0xd0000000-0xfeafffff]
>> >> [ 1.450941] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
>> >> [ 1.450942] pci_bus 0000:02: resource 2 [mem 0xdd000000-0xdeafffff
>> >> 64bit pref]
>> >> [ 1.450943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
>> >> [ 1.450944] pci_bus 0000:05: resource 1 [mem 0xdf900000-0xdf9fffff]
>> >> [ 1.450946] pci_bus 0000:06: resource 1 [mem 0xdf000000-0xdf8fffff]
>> >> [ 1.450947] pci_bus 0000:06: resource 2 [mem 0xdc000000-0xdcffffff
>> >> 64bit pref]
>> >> [ 1.450948] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
>> >> [ 1.450949] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
>> >> [ 1.450950] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
>> >> [ 1.450951] pci_bus 0000:06: resource 7 [mem 0x000cc000-0x000cffff]
>> >> [ 1.450952] pci_bus 0000:06: resource 8 [mem 0x000d0000-0x000d3fff]
>> >> [ 1.450953] pci_bus 0000:06: resource 9 [mem 0x000d4000-0x000d7fff]
>> >> [ 1.450954] pci_bus 0000:06: resource 10 [mem
>> >> 0x000d8000-0x000dbfff]
>> >> [ 1.450955] pci_bus 0000:06: resource 11 [mem
>> >> 0x000dc000-0x000dffff]
>> >> [ 1.450956] pci_bus 0000:06: resource 12 [mem
>> >> 0x000e0000-0x000e3fff]
>> >> [ 1.450957] pci_bus 0000:06: resource 13 [mem
>> >> 0x000e4000-0x000e7fff]
>> >> [ 1.450958] pci_bus 0000:06: resource 14 [mem
>> >> 0xd0000000-0xfeafffff]
>> >> [ 1.451014] NET: Registered protocol family 2
>> >> [ 1.455462] TCP established hash table entries: 262144 (order: 9,
>> >> 2097152 bytes)
>> >> [ 1.463005] TCP bind hash table entries: 65536 (order: 8, 1048576
>> >> bytes)
>> >> [ 1.469713] TCP: Hash tables configured (established 262144 bind
>> >> 65536)
>> >> [ 1.476246] TCP: reno registered
>> >> [ 1.479464] UDP hash table entries: 16384 (order: 7, 524288 bytes)
>> >> [ 1.485680] UDP-Lite hash table entries: 16384 (order: 7, 524288
>> >> bytes)
>> >> [ 1.492306] NET: Registered protocol family 1
>> >> [ 1.496818] PCI: CLS mismatch (64 != 32), using 64 bytes
>> >> [ 1.496823] pci 0000:06:03.0: Video device with shadowed ROM
>> >> [ 1.496853] Unpacking initramfs...
>> >> [ 1.690454] Freeing initrd memory: 15968K (ffff8800360c0000 -
>> >> ffff880037058000)
>> >> [ 1.697700] PCI-DMA: Using software bounce buffering for IO
>> >> (SWIOTLB)
>> >> [ 1.704118] software IO TLB [mem 0xca492000-0xce492000] (64MB)
>> >> mapped at [ffff8800ca492000-ffff8800ce491fff]
>> >> [ 1.714164] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
>> >> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>> >> [ 1.724674] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.730426] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.736250] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.750730] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.756546] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.762360] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.768179] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.773991] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
>> >> [ 1.779835] microcode: Microcode Update Driver: v2.00
>> >> <***@aivazian.fsnet.co.uk>, Peter Oruba
>> >> [ 1.788826] futex hash table entries: 2048 (order: 5, 131072 bytes)
>> >> [ 1.795033] audit: initializing netlink subsys (disabled)
>> >> [ 1.800388] audit: type=2000 audit(1443100076.548:1): initialized
>> >> [ 1.806664] HugeTLB registered 2 MB page size, pre-allocated 0
>> >> pages
>> >> [ 1.812933] zpool: loaded
>> >> [ 1.815517] zbud: loaded
>> >> [ 1.818158] VFS: Disk quotas dquot_6.5.2
>> >> [ 1.821997] Dquot-cache hash table entries: 512 (order 0, 4096
>> >> bytes)
>> >> [ 1.828445] msgmni has been set to 32768
>> >> [ 1.832595] alg: No test for stdrng (krng)
>> >> [ 1.836625] Block layer SCSI generic (bsg) driver version 0.4
>> >> loaded (major 252)
>> >> [ 1.844014] io scheduler noop registered
>> >> [ 1.847878] io scheduler deadline registered
>> >> [ 1.852131] io scheduler cfq registered (default)
>> >> [ 1.856959] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>> >> [ 1.857070] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
>> >> [ 1.857283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> >> [ 1.862775] pciehp: PCI Express Hot Plug Controller Driver version:
>> >> 0.4
>> >> [ 1.869391] intel_idle: MWAIT substates: 0x1120
>> >> [ 1.869392] intel_idle: v0.4 model 0x3A
>> >> [ 1.869393] intel_idle: lapic_timer_reliable_states 0xffffffff
>> >> [ 1.869628] ERST: Error Record Serialization Table (ERST) support
>> >> is initialized.
>> >> [ 1.877034] pstore: Registered erst as persistent store backend
>> >> [ 1.882975] GHES: APEI firmware first mode is enabled by WHEA _OSC.
>> >> [ 1.889229] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> >> [ 1.915898] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
>> >> is a 16550A
>> >> [ 1.943574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
>> >> is a 16550A
>> >> [ 1.971232] 00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud =
>> >> 115200) is a 16550A
>> >> [ 1.978753] Linux agpgart interface v0.103
>> >> [ 1.982831] i8042: PNP: No PS/2 controller found. Probing ports
>> >> directly.
>> >> [ 1.992701] serio: i8042 KBD port at 0x60,0x64 irq 1
>> >> [ 1.997575] serio: i8042 AUX port at 0x60,0x64 irq 12
>> >> [ 2.002720] mousedev: PS/2 mouse device common for all mice
>> >> [ 2.008232] rtc_cmos 00:02: RTC can wake from S4
>> >> [ 2.012908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>> >> [ 2.018943] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
>> >> nvram, hpet irqs
>> >> [ 2.026564] ledtrig-cpu: registered to indicate activity on CPUs
>> >> [ 2.032717] AMD IOMMUv2 driver by Joerg Roedel
>> >> <***@amd.com>
>> >> [ 2.039059] AMD IOMMUv2 functionality not available on this system
>> >> [ 2.045283] TCP: cubic registered
>> >> [ 2.048521] IPv6: Loaded, but administratively disabled, reboot
>> >> required to enable
>> >> [ 2.056071] mip6: Mobile IPv6
>> >> [ 2.059020] mip6: mip6_init: can't add xfrm type(destopt)
>> >> [ 2.064404] NET: Registered protocol family 17
>> >> [ 2.068836] mpls_gso: MPLS GSO support
>> >> [ 2.072972] registered taskstats version 1
>> >> [ 2.077499] rtc_cmos 00:02: setting system clock to 2015-09-24
>> >> 13:07:57 UTC (1443100077)
>> >> [ 2.085560] PM: Hibernation image not present or could not be
>> >> loaded.
>> >> [ 2.086094] Freeing unused kernel memory: 1228K (ffffffff818f3000 -
>> >> ffffffff81a26000)
>> >> [ 2.093851] Write protecting the kernel read-only data: 8192k
>> >> [ 2.100532] Freeing unused kernel memory: 620K (ffff880001565000 -
>> >> ffff880001600000)
>> >> [ 2.108556] Freeing unused kernel memory: 216K (ffff8800017ca000 -
>> >> ffff880001800000)
>> >> [ 2.123393] udevd[94]: starting version 175
>> >> [ 2.131920] pps_core: LinuxPPS API ver. 1 registered
>> >> [ 2.136823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
>> >> Rodolfo Giometti <***@linux.it>
>> >> [ 2.147106] PTP clock support registered
>> >> [ 2.151071] ACPI: bus type USB registered
>> >> [ 2.155038] usbcore: registered new interface driver usbfs
>> >> [ 2.160469] usbcore: registered new interface driver hub
>> >> [ 2.165787] usbcore: registered new device driver usb
>> >> [ 2.171019] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>> >> [ 2.176789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>> >> [ 2.182928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>> >> Driver
>> >> [ 2.189595] ehci-pci: EHCI PCI platform driver
>> >> [ 2.194192] i40e: Intel(R) Ethernet Connection XL710 Network Driver
>> >> - version 1.3.39.1
>> >> [ 2.197599] e1000e 0000:00:19.0: Interrupt Throttling Rate
>> >> (ints/sec) set to dynamic conservative mode
>> >> [ 2.197641] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> >> [ 2.198073] thermal LNXTHERM:00: registered as thermal_zone0
>> >> [ 2.198073] ACPI: Thermal Zone [TZ00] (28 C)
>> >> [ 2.198216] thermal LNXTHERM:01: registered as thermal_zone1
>> >> [ 2.198216] ACPI: Thermal Zone [TZ01] (30 C)
>> >> [ 2.231104] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
>> >> [ 2.249391] i40e 0000:02:00.0: fw 4.40.35115 api 1.4 nvm 4.53
>> >> 0x80001dc0 1.123.0
>> >> [ 2.256998] SCSI subsystem initialized
>> >> [ 2.261957] libata version 3.00 loaded.
>> >> [ 2.453377] e1000e 0000:00:19.0 eth0: registered PHC clock
>> >> [ 2.458796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width
>> >> x1) 00:25:90:a8:02:51
>> >> [ 2.466693] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
>> >> Connection
>> >> [ 2.473600] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
>> >> FFFFFF-0FF
>> >> [ 2.480564] ehci-pci 0000:00:1a.0: EHCI Host Controller
>> >> [ 2.480631] e1000e 0000:05:00.0: Interrupt Throttling Rate
>> >> (ints/sec) set to dynamic conservative mode
>> >> [ 2.480663] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
>> >> [ 2.480665] e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
>> >> [ 2.480667] e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
>> >> [ 2.495076] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
>> >> bus number 1
>> >> [ 2.495874] i40e 0000:02:00.0: MAC address: 3c:fd:fe:9c:56:b8
>> >> [ 2.499857] i40e 0000:02:00.0: SAN MAC: 3c:fd:fe:9c:56:ba
>> >> [ 2.513542] ehci-pci 0000:00:1a.0: debug port 2
>> >> [ 2.514095] i40e 0000:02:00.0: irq 30 for MSI/MSI-X
>> >> [ 2.514098] i40e 0000:02:00.0: irq 31 for MSI/MSI-X
>> >> [ 2.514099] i40e 0000:02:00.0: irq 32 for MSI/MSI-X
>> >> [ 2.514101] i40e 0000:02:00.0: irq 33 for MSI/MSI-X
>> >> [ 2.514103] i40e 0000:02:00.0: irq 34 for MSI/MSI-X
>> >> [ 2.514105] i40e 0000:02:00.0: irq 35 for MSI/MSI-X
>> >> [ 2.514107] i40e 0000:02:00.0: irq 36 for MSI/MSI-X
>> >> [ 2.514108] i40e 0000:02:00.0: irq 37 for MSI/MSI-X
>> >> [ 2.514110] i40e 0000:02:00.0: irq 38 for MSI/MSI-X
>> >> [ 2.514111] i40e 0000:02:00.0: irq 39 for MSI/MSI-X
>> >> [ 2.514113] i40e 0000:02:00.0: irq 40 for MSI/MSI-X
>> >> [ 2.514114] i40e 0000:02:00.0: irq 41 for MSI/MSI-X
>> >> [ 2.514116] i40e 0000:02:00.0: irq 42 for MSI/MSI-X
>> >> [ 2.514118] i40e 0000:02:00.0: irq 43 for MSI/MSI-X
>> >> [ 2.514119] i40e 0000:02:00.0: irq 44 for MSI/MSI-X
>> >> [ 2.514121] i40e 0000:02:00.0: irq 45 for MSI/MSI-X
>> >> [ 2.514122] i40e 0000:02:00.0: irq 46 for MSI/MSI-X
>> >> [ 2.514124] i40e 0000:02:00.0: irq 47 for MSI/MSI-X
>> >> [ 2.521951] ehci-pci 0000:00:1a.0: cache line size of 64 is not
>> >> supported
>> >> [ 2.521964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb24000
>> >> [ 2.537912] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>> >> [ 2.543607] usb usb1: New USB device found, idVendor=1d6b,
>> >> idProduct=0002
>> >> [ 2.550333] usb usb1: New USB device strings: Mfr=3, Product=2,
>> >> SerialNumber=1
>> >> [ 2.557541] usb usb1: Product: EHCI Host Controller
>> >> [ 2.562399] usb usb1: Manufacturer: Linux 3.18.20 ehci_hcd
>> >> [ 2.568471] usb usb1: SerialNumber: 0000:00:1a.0
>> >> [ 2.573164] hub 1-0:1.0: USB hub found
>> >> [ 2.576818] hub 1-0:1.0: 2 ports detected
>> >> [ 2.580962] ehci-pci 0000:00:1d.0: EHCI Host Controller
>> >> [ 2.586095] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
>> >> bus number 2
>> >> [ 2.593480] ehci-pci 0000:00:1d.0: debug port 2
>> >> [ 2.599535] e1000e 0000:05:00.0 eth2: registered PHC clock
>> >> [ 2.601911] ehci-pci 0000:00:1d.0: cache line size of 64 is not
>> >> supported
>> >> [ 2.601922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb23000
>> >> [ 2.610602] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width
>> >> x1) 00:25:90:a8:02:50
>> >> [ 2.613936] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>> >> [ 2.613963] usb usb2: New USB device found, idVendor=1d6b,
>> >> idProduct=0002
>> >> [ 2.613964] usb usb2: New USB device strings: Mfr=3, Product=2,
>> >> SerialNumber=1
>> >> [ 2.613965] usb usb2: Product: EHCI Host Controller
>> >> [ 2.613965] usb usb2: Manufacturer: Linux 3.18.20 ehci_hcd
>> >> [ 2.613966] usb usb2: SerialNumber: 0000:00:1d.0
>> >> [ 2.614075] hub 2-0:1.0: USB hub found
>> >> [ 2.614078] hub 2-0:1.0: 2 ports detected
>> >> [ 2.614192] ahci 0000:00:1f.2: version 3.0
>> >> [ 2.614340] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
>> >> [ 2.614485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3
>> >> Gbps 0x3f impl SATA mode
>> >> [ 2.614486] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
>> >> part ems apst
>> >> [ 2.626630] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x8
>> >> [ 2.654604] scsi host0: ahci
>> >> [ 2.654992] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66
>> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>> >> [ 2.657763] scsi host1: ahci
>> >> [ 2.658083] scsi host2: ahci
>> >> [ 2.658320] scsi host3: ahci
>> >> [ 2.658546] scsi host4: ahci
>> >> [ 2.658747] scsi host5: ahci
>> >> [ 2.658785] ata1: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> 0xdfb22100 irq 48
>> >> [ 2.658788] ata2: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> 0xdfb22180 irq 48
>> >> [ 2.658790] ata3: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> 0xdfb22200 irq 48
>> >> [ 2.658792] ata4: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> 0xdfb22280 irq 48
>> >> [ 2.658795] ata5: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> 0xdfb22300 irq 48
>> >> [ 2.658798] ata6: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> 0xdfb22380 irq 48
>> >> [ 2.670025] i40e 0000:02:00.1: fw 4.40.35115 api 1.4 nvm 4.53
>> >> 0x80001dc0 1.123.0
>> >> [ 2.714122] tsc: Refined TSC clocksource calibration: 3500.024 MHz
>> >> [ 2.769612] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network
>> >> Connection
>> >> [ 2.776551] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No:
>> >> FFFFFF-0FF
>> >> [ 2.890322] usb 1-1: new high-speed USB device number 2 using
>> >> ehci-pci
>> >> [ 2.916415] i40e 0000:02:00.1: MAC address: 3c:fd:fe:9c:56:b9
>> >> [ 2.926260] i40e 0000:02:00.1: SAN MAC: 3c:fd:fe:9c:56:bb
>> >> [ 2.930381] usb 2-1: new high-speed USB device number 2 using
>> >> ehci-pci
>> >> [ 2.952496] i40e 0000:02:00.1: irq 49 for MSI/MSI-X
>> >> [ 2.952503] i40e 0000:02:00.1: irq 50 for MSI/MSI-X
>> >> [ 2.952508] i40e 0000:02:00.1: irq 51 for MSI/MSI-X
>> >> [ 2.952512] i40e 0000:02:00.1: irq 52 for MSI/MSI-X
>> >> [ 2.952516] i40e 0000:02:00.1: irq 53 for MSI/MSI-X
>> >> [ 2.952520] i40e 0000:02:00.1: irq 54 for MSI/MSI-X
>> >> [ 2.952525] i40e 0000:02:00.1: irq 55 for MSI/MSI-X
>> >> [ 2.952537] i40e 0000:02:00.1: irq 56 for MSI/MSI-X
>> >> [ 2.952539] i40e 0000:02:00.1: irq 57 for MSI/MSI-X
>> >> [ 2.952541] i40e 0000:02:00.1: irq 58 for MSI/MSI-X
>> >> [ 2.952543] i40e 0000:02:00.1: irq 59 for MSI/MSI-X
>> >> [ 2.952545] i40e 0000:02:00.1: irq 60 for MSI/MSI-X
>> >> [ 2.952547] i40e 0000:02:00.1: irq 61 for MSI/MSI-X
>> >> [ 2.952549] i40e 0000:02:00.1: irq 62 for MSI/MSI-X
>> >> [ 2.952550] i40e 0000:02:00.1: irq 63 for MSI/MSI-X
>> >> [ 2.952554] i40e 0000:02:00.1: irq 64 for MSI/MSI-X
>> >> [ 2.952556] i40e 0000:02:00.1: irq 65 for MSI/MSI-X
>> >> [ 2.952558] i40e 0000:02:00.1: irq 66 for MSI/MSI-X
>> >> [ 2.978497] ata5: SATA link down (SStatus 0 SControl 300)
>> >> [ 2.983838] ata6: SATA link down (SStatus 0 SControl 300)
>> >> [ 2.989225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> >> [ 2.995381] ata4: SATA link down (SStatus 0 SControl 300)
>> >> [ 3.000756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> >> [ 3.007184] ata2: SATA link down (SStatus 0 SControl 300)
>> >> [ 3.012510] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> succeeded
>> >> [ 3.012514] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> >> LOCK) filtered out
>> >> [ 3.020391] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> CONFIGURATION OVERLAY) filtered out
>> >> [ 3.026954] usb 1-1: New USB device found, idVendor=8087,
>> >> idProduct=0024
>> >> [ 3.026955] usb 1-1: New USB device strings: Mfr=0, Product=0,
>> >> SerialNumber=0
>> >> [ 3.027240] hub 1-1:1.0: USB hub found
>> >> [ 3.027332] hub 1-1:1.0: 6 ports detected
>> >> [ 3.050510] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> succeeded
>> >> [ 3.050512] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> >> LOCK) filtered out
>> >> [ 3.061847] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x8
>> >> [ 3.067012] usb 2-1: New USB device found, idVendor=8087,
>> >> idProduct=0024
>> >> [ 3.067013] usb 2-1: New USB device strings: Mfr=0, Product=0,
>> >> SerialNumber=0
>> >> [ 3.067296] hub 2-1:1.0: USB hub found
>> >> [ 3.067384] hub 2-1:1.0: 6 ports detected
>> >> [ 3.090237] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66
>> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>> >> [ 3.103551] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> CONFIGURATION OVERLAY) filtered out
>> >> [ 3.112266] ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10250, max
>> >> UDMA/133
>> >> [ 3.118799] ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth
>> >> 31/32)
>> >> [ 3.125486] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, 1.00, max
>> >> UDMA/133
>> >> [ 3.132254] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> succeeded
>> >> [ 3.132259] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> >> LOCK) filtered out
>> >> [ 3.140106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> CONFIGURATION OVERLAY) filtered out
>> >> [ 3.148916] ata1.00: configured for UDMA/133
>> >> [ 3.153298] scsi 0:0:0:0: Direct-Access ATA INTEL
>> >> SSDSC2BA20 0250 PQ: 0 ANSI: 5
>> >> [ 3.154140] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> succeeded
>> >> [ 3.154142] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>> >> LOCK) filtered out
>> >> [ 3.154143] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> CONFIGURATION OVERLAY) filtered out
>> >> [ 3.156130] ata3.00: configured for UDMA/133
>> >> [ 3.185352] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N
>> >> 1.00 PQ: 0 ANSI: 5
>> >> [ 3.298953] usb 1-1.2: new full-speed USB device number 3 using
>> >> ehci-pci
>> >> [ 3.323219] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks:
>> >> (200 GB/186 GiB)
>> >> [ 3.330670] sd 0:0:0:0: [sda] Write Protect is off
>> >> [ 3.335418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> >> [ 3.335427] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> >> enabled, doesn't support DPO or FUA
>> >> [ 3.338917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
>> >> dvd-ram cd/rw xa/form2 cdda tray
>> >> [ 3.338918] cdrom: Uniform CD-ROM driver Revision: 3.20
>> >> [ 3.339081] sr 2:0:0:0: Attached scsi CD-ROM sr0
>> >> [ 3.358408] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> >> [ 3.358668] sda: sda1 sda2
>> >> [ 3.358886] sd 0:0:0:0: [sda] Attached SCSI disk
>> >> [ 3.371134] sr 2:0:0:0: Attached scsi generic sg1 type 5
>> >> [ 3.396737] usb 1-1.2: New USB device found, idVendor=0557,
>> >> idProduct=2221
>> >> [ 3.403526] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
>> >> SerialNumber=0
>> >> [ 3.410814] usb 1-1.2: Product: Hermon USB hidmouse Device
>> >> [ 3.416282] usb 1-1.2: Manufacturer: Winbond Electronics Corp
>> >> [ 3.423736] hidraw: raw HID events driver (C) Jiri Kosina
>> >> [ 3.430436] usbcore: registered new interface driver usbhid
>> >> [ 3.435922] usbhid: USB HID core driver
>> >> [ 3.440716] input: Winbond Electronics Corp Hermon USB hidmouse
>> >> Device as
>> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
>> 1.2:1.0/0003:0557:2221.0001/input/input2
>> >> [ 3.455434] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID
>> >> v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on
>> >> usb-0000:00:1a.0-1.2/input0
>> >> [ 3.470147] input: Winbond Electronics Corp Hermon USB hidmouse
>> >> Device as
>> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
>> 1.2:1.1/0003:0557:2221.0002/input/input3
>> >> [ 3.484849] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID
>> >> v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device]
>> >> on usb-0000:00:1a.0-1.2/input1
>> >> [ 3.507384] PM: Starting manual resume from disk
>> >> [ 3.511922] PM: Hibernation image partition 8:1 present
>> >> [ 3.511923] PM: Looking for hibernation image.
>> >> [ 3.512127] PM: Image not found (code -22)
>> >> [ 3.512131] PM: Hibernation image not present or could not be
>> >> loaded.
>> >> [ 3.517313] EXT4-fs (sda2): mounting ext3 file system using the
>> >> ext4 subsystem
>> >> [ 3.529000] EXT4-fs (sda2): mounted filesystem with ordered data
>> >> mode. Opts: (null)
>> >> [ 3.715841] Switched to clocksource tsc
>> >> [ 3.885031] udevd[667]: starting version 175
>> >> [ 4.011695] input: Power Button as
>> >> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>> >> [ 4.020070] ACPI: Power Button [PWRB]
>> >> [ 4.023703] input: Power Button as
>> >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>> >> [ 4.031033] ACPI: Power Button [PWRF]
>> >> [ 4.034781] EDAC MC: Ver: 3.0.0
>> >> [ 4.038626] EDAC MC0: Giving out device to module ie31200_edac
>> >> controller IE31200: DEV 0000:00:00.0 (POLLED)
>> >> [ 4.115904] ipmi message handler version 39.2
>> >> [ 4.121319] IPMI System Interface driver.
>> >> [ 4.126068] ipmi_si: probing via ACPI
>> >> [ 4.129851] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
>> >> [ 4.135777] i40e 0000:02:00.1 rename5: renamed from eth3
>> >> [ 4.141149] ipmi_si: Adding ACPI-specified kcs state machine
>> >> [ 4.147092] ipmi_si: probing via SMBIOS
>> >> [ 4.147160] input: PC Speaker as
>> >> /devices/platform/pcspkr/input/input6
>> >> [ 4.157409] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
>> >> [ 4.163305] ipmi_si: Adding SMBIOS-specified kcs state machine
>> >> duplicate interface
>> >> [ 4.170854] ipmi_si: probing via SPMI
>> >> [ 4.174504] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
>> >> [ 4.177849] i40e 0000:02:00.0 rename3: renamed from eth1
>> >> [ 4.185527] ipmi_si: Adding SPMI-specified kcs state machine
>> >> [ 4.185655] ACPI Warning: SystemIO range
>> >> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
>> >> 0x0000000000000400-0x000000000000047F (\PMIO) (20140926/utaddress-254)
>> >> [ 4.185658] ACPI: If an ACPI driver is available for this device,
>> >> you should use it instead of the native driver
>> >> [ 4.185660] ACPI Warning: SystemIO range
>> >> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
>> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>> >> [ 4.185662] ACPI: If an ACPI driver is available for this device,
>> >> you should use it instead of the native driver
>> >> [ 4.185662] ACPI Warning: SystemIO range
>> >> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
>> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>> >> [ 4.185664] ACPI: If an ACPI driver is available for this device,
>> >> you should use it instead of the native driver
>> >> [ 4.185664] ACPI Warning: SystemIO range
>> >> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
>> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>> >> [ 4.185665] ACPI: If an ACPI driver is available for this device,
>> >> you should use it instead of the native driver
>> >> [ 4.185665] lpc_ich: Resource conflict(s) found affecting gpio_ich
>> >> [ 4.280990] iTCO_vendor_support: vendor-support=0
>> >> [ 4.304270] duplicate interface
>> >> [ 4.307664] ipmi_si: Trying ACPI-specified kcs state machine at i/o
>> >> address 0xca2, slave address 0x0, irq 0
>> >> [ 4.318187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>> >> [ 4.323711] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
>> >> TCOBASE=0x0460)
>> >> [ 4.323818] e1000e 0000:00:19.0 eth3: renamed from eth0
>> >> [ 4.336446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> >> [ 4.342474] AVX version of gcm_enc/dec engaged.
>> >> [ 4.346907] AES CTR mode by8 optimization enabled
>> >> [ 4.351931] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>> >> [ 4.352819] alg: No test for __gcm-aes-aesni
>> >> (__driver-gcm-aes-aesni)
>> >> [ 4.364158] i40e 0000:02:00.1 eth1: renamed from rename5
>> >> [ 4.370154] [drm] Initialized drm 1.1.0 20060810
>> >> [ 4.374797] Error: Driver 'pcspkr' is already registered,
>> >> aborting...
>> >> [ 4.381228] alg: No test for crc32 (crc32-pclmul)
>> >> [ 4.395990] [TTM] Zone kernel: Available graphics memory: 16494382
>> >> kiB
>> >> [ 4.396626] i40e 0000:02:00.0 eth0: renamed from rename3
>> >> [ 4.407813] [TTM] Zone dma32: Available graphics memory: 2097152
>> >> kiB
>> >> [ 4.414324] [TTM] Initializing pool allocator
>> >> [ 4.418678] [TTM] Initializing DMA pool allocator
>> >> [ 4.425605] intel_rapl: Found RAPL domain package
>> >> [ 4.430215] intel_rapl: Found RAPL domain core
>> >> [ 4.446166] fbcon: mgadrmfb (fb0) is primary device
>> >> [ 4.489833] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c,
>> >> prod_id: 0x0624, dev_id: 0x20)
>> >> [ 4.489843] ipmi_si 00:0a: IPMI kcs interface initialized
>> >> [ 4.604074] Console: switching to colour frame buffer device 128x48
>> >> [ 4.698245] mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer device
>> >> [ 4.704491] mgag200 0000:06:03.0: registered panic notifier
>> >> [ 4.733133] [drm] Initialized mgag200 1.0.0 20110418 for
>> >> 0000:06:03.0 on minor 0
>> >> [ 4.975874] Adding 3905532k swap on /dev/sda1. Priority:-1
>> >> extents:1 across:3905532k SSFS
>> >> [ 5.002394] EXT4-fs (sda2): re-mounted. Opts: (null)
>> >> [ 5.044749] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>> >> [ 5.077354] loop: module loaded
>> >> [ 5.087636] Ethernet Channel Bonding Driver: v3.7.1 (April 27,
>> >> 2011)
>> >> [ 5.101990] nf_conntrack version 0.5.0 (17374463 buckets, 138995704
>> >> max)
>> >> [ 5.108653] nf_conntrack: falling back to vmalloc.
>> >> [ 5.735510] random: dd urandom read with 92 bits of entropy
>> >> available
>> >> [ 5.927034] bond0: Setting xmit hash policy to layer3+4 (1)
>> >> [ 5.927105] bond0: Setting MII monitoring interval to 100
>> >> [ 5.963685] bond0: Setting LACP rate to slow (0)
>> >> [ 6.119830] bond0: Adding slave eth0
>> >> [ 6.119841] i40e 0000:02:00.0 eth0: already using mac address
>> >> 3c:fd:fe:9c:56:b8
>> >> [ 6.123689] i40e 0000:02:00.0 eth0: NIC Link is Up 10 Gbps Full
>> >> Duplex, Flow Control: None
>> >> [ 6.123746] bond0: Enslaving eth0 as a backup interface with an up
>> >> link
>> >> [ 6.126208] bond0: Adding slave eth1
>> >> [ 6.126212] i40e 0000:02:00.1 eth1: set new mac address
>> >> 3c:fd:fe:9c:56:b8
>> >> [ 6.135693] i40e 0000:02:00.1 eth1: NIC Link is Up 10 Gbps Full
>> >> Duplex, Flow Control: None
>> >> [ 6.135756] bond0: Enslaving eth1 as a backup interface with an up
>> >> link
>> >> [ 7.145905] random: nonblocking pool is initialized
>> >> [ 12.460991] Process accounting resumed
>> >> [ 12.918920] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> >> [ 13.021814] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> >> [ 13.279044] nf_conntrack: falling back to vmalloc.
>> >> [ 13.323161] ip_tables: (C) 2000-2006 Netfilter Core Team
>> >>
>> >> On 2015-08-27 16:43, Rose, Gregory V wrote:
>> >>>> -----Original Message-----
>> >>>> From: Christian Ruppert [mailto:***@qasl.de]
>> >>>> Sent: Thursday, August 27, 2015 4:54 AM
>> >>>> To: Fujinaka, Todd
>> >>>> Cc: Rose, Gregory V; e1000-***@lists.sf.net
>> >>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>>>
>> >>>> Well, that's it for now anyway...
>> >>>>
>> >>>> ...
>> >>>> Power cycle is required to complete the update process.
>> >>>> Tool execution completed with the following status: All operations
>> >>>> completed successfully
>> >>>>
>> >>>> The card doesn't even appear in "lspci" anymore... :/ I used a Win7
>> >>>> to
>> >>>> flash it since a co-worker already broke one when flashing via
>> >>>> Linux. No
>> >>>> idea how to unbrick it.
>> >>>
>> >>> Christian,
>> >>>
>> >>> I'm very sorry to hear that. It is pretty rare for this sort of
>> >>> thing
>> >>> to happen but not unheard of. Please contact ***@intel.com to
>> >>> get
>> >>> help replacing the part.
>> >>>
>> >>> - Greg
>> >>>
>> >>>>
>> >>>>
>> >>>> On 2015-08-27 01:25, Fujinaka, Todd wrote:
>> >>>> > Attachments don't work on this mailing list (though they may have
>> >>>> > gotten to Greg). Please file a bug on e1000.sourceforge.net and
>> attach
>> >>>> > the files there.
>> >>>> >
>> >>>> > Todd Fujinaka
>> >>>> > Software Application Engineer
>> >>>> > Networking Division (ND)
>> >>>> > Intel Corporation
>> >>>> > ***@intel.com
>> >>>> > (503) 712-4565
>> >>>> >
>> >>>> > -----Original Message-----
>> >>>> > From: Christian Ruppert [mailto:***@qasl.de]
>> >>>> > Sent: Wednesday, August 26, 2015 10:24 AM
>> >>>> > To: Rose, Gregory V
>> >>>> > Cc: e1000-***@lists.sf.net
>> >>>> > Subject: Re: [E1000-devel] X710 / i40e interface resets
>> >>>> >
>> >>>> > On 2015-08-26 01:19, Rose, Gregory V wrote:
>> >>>> >>> -----Original Message-----
>> >>>> >>> From: Christian Ruppert [mailto:***@qasl.de]
>> >>>> >>> Sent: Friday, August 21, 2015 7:06 AM
>> >>>> >>> To: Rose, Gregory V
>> >>>> >>> Cc: e1000-***@lists.sf.net
>> >>>> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>>> >>>
>> >>>> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>> >>>> >>> >> -----Original Message-----
>> >>>> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >>>> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>> >>>> >>> >> To: Rose, Gregory V
>> >>>> >>> >> Cc: e1000-***@lists.sf.net
>> >>>> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>>> >>> >>
>> >>>> >>
>> >>>> >> [snip]
>> >>>> >>
>> >>>> >>> > I've been told that the Tx driver issue detected message is due
>> to
>> >>>> >>> > a MDD (Malicious Driver Detection) event. We need to find out
>> what
>> >>>> >>> > is causing that so if you could please send me your system log
>> and
>> >>>> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I
>> can
>> >>>> >>> > see what might be occurring. If not then we'll have to debug
>> >>>> further.
>> >>>> >>>
>> >>>> >>> See the initial Mail for ethtool -k and so on. Also:
>> >>>> >>> # ethtool eth0
>> >>>> >>> Settings for eth0:
>> >>>> >>> Supported ports: [ FIBRE ]
>> >>>> >>> Supported link modes: 1000baseT/Full
>> >>>> >>> 10000baseT/Full
>> >>>> >>> Supported pause frame use: Symmetric
>> >>>> >>> Supports auto-negotiation: No
>> >>>> >>> Advertised link modes: 1000baseT/Full
>> >>>> >>> 10000baseT/Full
>> >>>> >>> Advertised pause frame use: No
>> >>>> >>> Advertised auto-negotiation: No
>> >>>> >>> Speed: 10000Mb/s
>> >>>> >>> Duplex: Full
>> >>>> >>> Port: FIBRE
>> >>>> >>> PHYAD: 0
>> >>>> >>> Transceiver: external
>> >>>> >>> Auto-negotiation: off
>> >>>> >>> Supports Wake-on: d
>> >>>> >>> Wake-on: d
>> >>>> >>> Current message level: 0x0000000f (15)
>> >>>> >>> drv probe link timer
>> >>>> >>> Link detected: yes
>> >>>> >>> # ethtool -i eth0
>> >>>> >>> driver: i40e
>> >>>> >>> version: 1.2.48
>> >>>> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>> >>>> >>> bus-info: 0000:02:00.0
>> >>>> >>> supports-statistics: yes
>> >>>> >>> supports-test: yes
>> >>>> >>> supports-eeprom-access: yes
>> >>>> >>> supports-register-dump: yes
>> >>>> >>> supports-priv-flags: yes
>> >>>> >>
>> >>>> >> I also need the output of 'dmesg' - and I need to figure out how
>> to
>> >>>> >> determine what specific MDD event is occurring. I'll get back to
>> you
>> >>>> >> with instructions on how to do that when I get the system log from
>> >>>> >> you.
>> >>>> >
>> >>>> > See the attached file. It's a dmesg from boot + some minutes.
>> >>>> > I'll upgrade the card's firmware tomorrow I guess and try out the
>> new
>> >>>> > drivers btw.
>> >>>> >
>> >>>> >>
>> >>>> >> Thanks,
>> >>>> >>
>> >>>> >> - Greg
>> >>>> >
>> >>>> > --
>> >>>> > Regards,
>> >>>> > Christian Ruppert
>> >>>>
>> >>>> --
>> >>>> Regards,
>> >>>> Christian Ruppert
>>
>> --
>> Regards,
>> Christian Ruppert

--
Regards,
Christian Ruppert
Christian Ruppert
2015-10-07 15:02:15 UTC
Permalink
On 2015-10-07 17:00, Christian Ruppert wrote:
> On 2015-10-07 16:14, Rose, Gregory V wrote:
>>> -----Original Message-----
>>> From: Christian Ruppert [mailto:***@qasl.de]
>>> Sent: Wednesday, October 07, 2015 12:59 AM
>>> To: Rose, Gregory V
>>> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>>
>>> Is there anything else I can do to help to get that debugged/fixed?
>>> We upgraded the connection from 1G to 10G btw (it was 1G before).
>>
>> We'll need to get a setup to reproduce the problem so we can debug it.
>> Can you provide that information? Or perhaps you've provided it
>> before and I'm just not seeing it? If that's the case can you point
>> me to it again?
>>
>> Thanks,
>>
>> - Greg
>
> Hi Greg,
>
> in this case it's a Supermicro 5017C-MTF (X9SCL/X9SCM) using a X710
> 10GE card, both ports connected to 10GE switch ports (LACP).
> WAN->Router->Swich->Host
> The host in this case acts as a loadbalancer using e.g. Varnish and
> HAProxy and doing mostly HTTP traffic (also SSL termination).
> Do you need anything else?

Oh, and it's a Debian Wheezy, using a 3.18.30 Kernel (based on the
Debian config though) and recent i40e drivers (1.3.39.1).

>
>>
>>>
>>> On 2015-09-28 16:53, Christian Ruppert wrote:
>>> > And there we go:
>>> >
>>> > [77571.409182] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [77572.245943] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> > [94412.738896] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [94413.569379] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> > [94516.443592] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [94516.718341] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> > [96850.580882] i40e 0000:02:00.0: TX driver issue detected, PF reset
>>> > issued
>>> > [96851.036998] bond0: link status up again after 0 ms for interface
>>> > eth0
>>> > [96939.474122] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [96940.217799] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> > [96945.007365] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [96945.225029] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> > [96965.362669] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [96966.255350] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> > [99844.991331] i40e 0000:02:00.0: TX driver issue detected, PF reset
>>> > issued
>>> > [99845.360288] bond0: link status up again after 0 ms for interface
>>> > eth0
>>> > [159908.054220] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [159909.165679] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> > [329531.138706] i40e 0000:02:00.1: TX driver issue detected, PF reset
>>> > issued
>>> > [329532.167421] bond0: link status up again after 0 ms for interface
>>> > eth1
>>> >
>>> > On 2015-09-25 16:19, Christian Ruppert wrote:
>>> >> Hi,
>>> >>
>>> >> the card came back and I had to flash it again but it worked perfectly
>>> >> fine this time :)
>>> >> So I setup a new Kernel (3.18.20) and the most recent i40e driver
>>> >> (1.3.39.1) and removed the previous workaround to disable ntuples on
>>> >> both interfaces. So basically a vanilla setup.
>>> >> That host is up for several hours no and there was no spam so far and
>>> >> only one reset yet:
>>> >> Sep 25 12:38:54 somehost kernel: [77571.409182] i40e 0000:02:00.1: TX
>>> >> driver issue detected, PF reset issued
>>> >> Sep 25 12:38:55 somehost kernel: [77572.245943] bond0: link status up
>>> >> again after 0 ms for interface eth1
>>> >>
>>> >> and here's the requested dmesg again:
>>> >> [ 0.000000] Initializing cgroup subsys cpuset
>>> >> [ 0.000000] Initializing cgroup subsys cpu
>>> >> [ 0.000000] Initializing cgroup subsys cpuacct
>>> >> [ 0.000000] Linux version 3.18.20 (***@somehost) (gcc version 4.7.2
>>> >> (Debian 4.7.2-5) ) #1 SMP Wed Aug 26 14:25:15 CEST 2015
>>> >> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>>> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>>> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>>> >> [ 0.000000] e820: BIOS-provided physical RAM map:
>>> >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff]
>>> >> usable
>>> >> [ 0.000000] BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000becc8fff]
>>> >> usable
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000becc9000-0x00000000bed0bfff]
>>> >> ACPI NVS
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000bed0c000-0x00000000ce491fff]
>>> >> usable
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce492000-0x00000000ce534fff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce535000-0x00000000ce5c6fff]
>>> >> usable
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce5c7000-0x00000000ce68bfff]
>>> >> ACPI NVS
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce68c000-0x00000000cf7fefff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
>>> >> usable
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
>>> >> reserved
>>> >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff]
>>> >> usable
>>> >> [ 0.000000] console [earlyser0] enabled
>>> >> [ 0.000000] NX (Execute Disable) protection: active
>>> >> [ 0.000000] SMBIOS 2.7 present.
>>> >> [ 0.000000] DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2
>>> >> 02/20/2015
>>> >> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
>>> >> reserved
>>> >> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>>> >> [ 0.000000] AGP: No AGP bridge found
>>> >> [ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
>>> >> [ 0.000000] MTRR default type: uncachable
>>> >> [ 0.000000] MTRR fixed ranges enabled:
>>> >> [ 0.000000] 00000-9FFFF write-back
>>> >> [ 0.000000] A0000-BFFFF uncachable
>>> >> [ 0.000000] C0000-CBFFF write-protect
>>> >> [ 0.000000] CC000-E7FFF uncachable
>>> >> [ 0.000000] E8000-FFFFF write-protect
>>> >> [ 0.000000] MTRR variable ranges enabled:
>>> >> [ 0.000000] 0 base 000000000 mask 800000000 write-back
>>> >> [ 0.000000] 1 base 800000000 mask FE0000000 write-back
>>> >> [ 0.000000] 2 base 820000000 mask FF0000000 write-back
>>> >> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
>>> >> [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
>>> >> [ 0.000000] 5 disabled
>>> >> [ 0.000000] 6 disabled
>>> >> [ 0.000000] 7 disabled
>>> >> [ 0.000000] 8 disabled
>>> >> [ 0.000000] 9 disabled
>>> >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
>>> >> 0x7010600070106
>>> >> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
>>> >> reserved
>>> >> [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
>>> >> [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf]
>>> >> mapped at [ffff8800000fd7b0]
>>> >> [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size
>>> >> 24576
>>> >> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>>> >> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
>>> >> [ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
>>> >> [ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
>>> >> [ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
>>> >> [ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
>>> >> [ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M
>>> >> [ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
>>> >> [ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
>>> >> [ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M
>>> >> [ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff]
>>> >> [ 0.000000] [mem 0x800000000-0x82bffffff] page 2M
>>> >> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbecc8fff]
>>> >> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
>>> >> [ 0.000000] [mem 0x00200000-0xbebfffff] page 2M
>>> >> [ 0.000000] [mem 0xbec00000-0xbecc8fff] page 4k
>>> >> [ 0.000000] init_memory_mapping: [mem 0xbed0c000-0xce491fff]
>>> >> [ 0.000000] [mem 0xbed0c000-0xbedfffff] page 4k
>>> >> [ 0.000000] [mem 0xbee00000-0xce3fffff] page 2M
>>> >> [ 0.000000] [mem 0xce400000-0xce491fff] page 4k
>>> >> [ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
>>> >> [ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
>>> >> [ 0.000000] init_memory_mapping: [mem 0xce535000-0xce5c6fff]
>>> >> [ 0.000000] [mem 0xce535000-0xce5c6fff] page 4k
>>> >> [ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
>>> >> [ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
>>> >> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
>>> >> [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
>>> >> [ 0.000000] RAMDISK: [mem 0x360c0000-0x37057fff]
>>> >> [ 0.000000] ACPI: Early table checksum verification disabled
>>> >> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
>>> >> [ 0.000000] ACPI: XSDT 0x00000000CE64F088 00008C (v01 SUPERM
>>> >> SMCI--MB 00000001 AMI 00010013)
>>> >> [ 0.000000] ACPI: FACP 0x00000000CE65A210 00010C (v05 SUPERM
>>> >> SMCI--MB 00000001 AMI 00010013)
>>> >> [ 0.000000] ACPI: DSDT 0x00000000CE64F1A8 00B068 (v02 SUPERM
>>> >> SMCI--MB 00000000 INTL 20051117)
>>> >> [ 0.000000] ACPI: FACS 0x00000000CE68A080 000040
>>> >> [ 0.000000] ACPI: APIC 0x00000000CE65A320 000092 (v03 SUPERM
>>> >> SMCI--MB 00000001 AMI 00010013)
>>> >> [ 0.000000] ACPI: FPDT 0x00000000CE65A3B8 000044 (v01 SUPERM
>>> >> SMCI--MB 00000001 AMI 00010013)
>>> >> [ 0.000000] ACPI: MCFG 0x00000000CE65A400 00003C (v01 SUPERM
>>> >> SMCI--MB 00000001 MSFT 00000097)
>>> >> [ 0.000000] ACPI: HPET 0x00000000CE65A440 000038 (v01 SUPERM
>>> >> SMCI--MB 00000001 AMI. 00000005)
>>> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A478 000397 (v01 SataRe
>>> >> SataTabl 00001000 INTL 20091112)
>>> >> [ 0.000000] ACPI: SPMI 0x00000000CE65A810 000040 (v05 A M I
>>> >> OEMSPMI 00000000 AMI. 00000000)
>>> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A850 0009A4 (v01 PmRef
>>> >> Cpu0Ist 00003000 INTL 20051117)
>>> >> [ 0.000000] ACPI: SSDT 0x00000000CE65B1F8 000B18 (v01 PmRef CpuPm
>>> >> 00003000 INTL 20051117)
>>> >> [ 0.000000] ACPI: EINJ 0x00000000CE65BD10 000130 (v01 AMI AMI
>>> >> EINJ 00000000 00000000)
>>> >> [ 0.000000] ACPI: ERST 0x00000000CE65BE40 000210 (v01 AMIER AMI
>>> >> ERST 00000000 00000000)
>>> >> [ 0.000000] ACPI: HEST 0x00000000CE65C050 0000A8 (v01 AMI AMI
>>> >> HEST 00000000 00000000)
>>> >> [ 0.000000] ACPI: BERT 0x00000000CE65C0F8 000030 (v01 AMI AMI
>>> >> BERT 00000000 00000000)
>>> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
>>> >> [ 0.000000] No NUMA configuration found
>>> >> [ 0.000000] Faking a node at [mem
>>> >> 0x0000000000000000-0x000000082fffffff]
>>> >> [ 0.000000] NODE_DATA(0) allocated [mem 0x82ffdc000-0x82ffdffff]
>>> >> [ 0.000000] [ffffea0000000000-ffffea001cbfffff] PMD ->
>>> >> [ffff88080f600000-ffff88082b7fffff] on node 0
>>> >> [ 0.000000] Zone ranges:
>>> >> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>>> >> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
>>> >> [ 0.000000] Normal [mem 0x100000000-0x82fffffff]
>>> >> [ 0.000000] Movable zone start for each node
>>> >> [ 0.000000] Early memory node ranges
>>> >> [ 0.000000] node 0: [mem 0x00001000-0x00098fff]
>>> >> [ 0.000000] node 0: [mem 0x00100000-0xbecc8fff]
>>> >> [ 0.000000] node 0: [mem 0xbed0c000-0xce491fff]
>>> >> [ 0.000000] node 0: [mem 0xce535000-0xce5c6fff]
>>> >> [ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
>>> >> [ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
>>> >> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x82fffffff]
>>> >> [ 0.000000] On node 0 totalpages: 8381562
>>> >> [ 0.000000] DMA zone: 56 pages used for memmap
>>> >> [ 0.000000] DMA zone: 21 pages reserved
>>> >> [ 0.000000] DMA zone: 3992 pages, LIFO batch:0
>>> >> [ 0.000000] DMA32 zone: 11498 pages used for memmap
>>> >> [ 0.000000] DMA32 zone: 840930 pages, LIFO batch:31
>>> >> [ 0.000000] Normal zone: 103040 pages used for memmap
>>> >> [ 0.000000] Normal zone: 7536640 pages, LIFO batch:31
>>> >> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>>> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>>> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>>> >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>>> >> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>>> >> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
>>> >> GSI 0-23
>>> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
>>> >> dfl)
>>> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>>> >> level)
>>> >> [ 0.000000] ACPI: IRQ0 used by override.
>>> >> [ 0.000000] ACPI: IRQ9 used by override.
>>> >> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>>> >> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>>> >> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0x00000000-0x00000fff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0x00099000-0x00099fff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0x0009a000-0x0009ffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0x000a0000-0x000dffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0x000e0000-0x000fffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xbecc9000-0xbed0bfff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xce492000-0xce534fff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xce5c7000-0xce68bfff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xce68c000-0xcf7fefff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xcf800000-0xdfffffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xe0000000-0xefffffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xf0000000-0xfebfffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfec00000-0xfec00fff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfec01000-0xfecfffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfed00000-0xfed03fff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfed04000-0xfed1bfff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfed1c000-0xfed1ffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfed20000-0xfedfffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfee00000-0xfee00fff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xfee01000-0xfeffffff]
>>> >> [ 0.000000] PM: Registered nosave memory: [mem
>>> >> 0xff000000-0xffffffff]
>>> >> [ 0.000000] e820: [mem 0xcf800000-0xdfffffff] available for PCI
>>> >> devices
>>> >> [ 0.000000] Booting paravirtualized kernel on bare hardware
>>> >> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
>>> >> nr_cpu_ids:8 nr_node_ids:1
>>> >> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s80960
>>> >> r8192 d29632 u262144
>>> >> [ 0.000000] pcpu-alloc: s80960 r8192 d29632 u262144 alloc=1*2097152
>>> >> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>>> >> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
>>> >> Total pages: 8266947
>>> >> [ 0.000000] Policy zone: Normal
>>> >> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>>> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>>> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>>> >> [ 0.000000] Intel-IOMMU: disabled
>>> >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>>> >> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
>>> >> standard form
>>> >> [ 0.000000] AGP: Checking aperture...
>>> >> [ 0.000000] AGP: No AGP bridge found
>>> >> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
>>> >> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
>>> >> bailing!
>>> >> [ 0.000000] Memory: 32970712K/33526248K available (5512K kernel
>>> >> code, 966K rwdata, 1832K rodata, 1228K init, 852K bss, 555536K
>>> >> reserved)
>>> >> [ 0.000000] Hierarchical RCU implementation.
>>> >> [ 0.000000] RCU dyntick-idle grace-period acceleration is
>>> enabled.
>>> >> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to
>>> nr_cpu_ids=8.
>>> >> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
>>> >> nr_cpu_ids=8
>>> >> [ 0.000000] NR_IRQS:33024 nr_irqs:488 0
>>> >> [ 0.000000] Console: colour VGA+ 80x25
>>> >> [ 0.000000] console [tty0] enabled
>>> >> [ 0.000000] allocated 134217728 bytes of page_cgroup
>>> >> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
>>> >> want memory cgroups
>>> >> [ 0.000000] hpet clockevent registered
>>> >> [ 0.000000] tsc: Fast TSC calibration failed
>>> >> [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
>>> >> [ 0.000000] tsc: Detected 3499.669 MHz processor
>>> >> [ 0.000025] Calibrating delay loop (skipped), value calculated
>>> >> using timer frequency.. 6999.33 BogoMIPS (lpj=13998676)
>>> >> [ 0.010617] pid_max: default: 32768 minimum: 301
>>> >> [ 0.015230] ACPI: Core revision 20140926
>>> >> [ 0.024681] ACPI: All ACPI Tables successfully acquired
>>> >> [ 0.039606] Security Framework initialized
>>> >> [ 0.043611] AppArmor: AppArmor disabled by boot time parameter
>>> >> [ 0.049421] Yama: becoming mindful.
>>> >> [ 0.054266] Dentry cache hash table entries: 4194304 (order: 13,
>>> >> 33554432 bytes)
>>> >> [ 0.067119] Inode-cache hash table entries: 2097152 (order: 12,
>>> >> 16777216 bytes)
>>> >> [ 0.076825] Mount-cache hash table entries: 65536 (order: 7, 524288
>>> >> bytes)
>>> >> [ 0.083636] Mountpoint-cache hash table entries: 65536 (order: 7,
>>> >> 524288 bytes)
>>> >> [ 0.091133] Initializing cgroup subsys memory
>>> >> [ 0.095401] Initializing cgroup subsys devices
>>> >> [ 0.099824] Initializing cgroup subsys freezer
>>> >> [ 0.104249] Initializing cgroup subsys net_cls
>>> >> [ 0.108676] Initializing cgroup subsys blkio
>>> >> [ 0.112929] Initializing cgroup subsys perf_event
>>> >> [ 0.117615] Initializing cgroup subsys net_prio
>>> >> [ 0.122145] CPU: Physical Processor ID: 0
>>> >> [ 0.126120] CPU: Processor Core ID: 0
>>> >> [ 0.129769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>>> >> [ 0.129769] ENERGY_PERF_BIAS: View and update with
>>> >> x86_energy_perf_policy(8)
>>> >> [ 0.143037] mce: CPU supports 9 MCE banks
>>> >> [ 0.146959] CPU0: Thermal monitoring enabled (TM1)
>>> >> [ 0.151728] process: using mwait in idle threads
>>> >> [ 0.156328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>>> >> [ 0.156328] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>>> >> [ 0.168125] Freeing SMP alternatives memory: 20K (ffffffff81a26000
>>> >> - ffffffff81a2b000)
>>> >> [ 0.176733] ftrace: allocating 22083 entries in 87 pages
>>> >> [ 0.197324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> >> [ 0.242968] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 V2 @
>>> >> 3.50GHz (fam: 06, model: 3a, stepping: 09)
>>> >> [ 0.252247] TSC deadline timer enabled
>>> >> [ 0.252264] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge
>>> >> events, full-width counters, Intel PMU driver.
>>> >> [ 0.262484] ... version: 3
>>> >> [ 0.266477] ... bit width: 48
>>> >> [ 0.270555] ... generic registers: 4
>>> >> [ 0.274548] ... value mask: 0000ffffffffffff
>>> >> [ 0.279843] ... max period: 0000ffffffffffff
>>> >> [ 0.285137] ... fixed-purpose events: 3
>>> >> [ 0.289130] ... event mask: 000000070000000f
>>> >> [ 0.295409] x86: Booting SMP configuration:
>>> >> [ 0.299494] .... node #0, CPUs: #1
>>> >> [ 0.316534] NMI watchdog: enabled on all CPUs, permanently consumes
>>> >> one hw-PMU counter.
>>> >> [ 0.324669] #2 #3 #4 #5 #6 #7
>>> >> [ 0.407240] x86: Booted up 1 node, 8 CPUs
>>> >> [ 0.411319] smpboot: Total of 8 processors activated (55994.70
>>> >> BogoMIPS)
>>> >> [ 0.424047] devtmpfs: initialized
>>> >> [ 0.430926] PM: Registering ACPI NVS region [mem
>>> >> 0xbecc9000-0xbed0bfff] (274432 bytes)
>>> >> [ 0.438777] PM: Registering ACPI NVS region [mem
>>> >> 0xce5c7000-0xce68bfff] (806912 bytes)
>>> >> [ 0.447304] pinctrl core: initialized pinctrl subsystem
>>> >> [ 0.452519] NET: Registered protocol family 16
>>> >> [ 0.468890] cpuidle: using governor ladder
>>> >> [ 0.488929] cpuidle: using governor menu
>>> >> [ 0.492803] ACPI FADT declares the system doesn't support PCIe
>>> >> ASPM, so disable it
>>> >> [ 0.500309] ACPI: bus type PCI registered
>>> >> [ 0.504301] acpiphp: ACPI Hot Plug PCI Controller Driver version:
>>> >> 0.5
>>> >> [ 0.510784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>>> >> 0xe0000000-0xefffffff] (base 0xe0000000)
>>> >> [ 0.520010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
>>> >> in E820
>>> >> [ 0.526980] PCI: Using configuration type 1 for base access
>>> >> [ 0.544821] ACPI: Added _OSI(Module Device)
>>> >> [ 0.548905] ACPI: Added _OSI(Processor Device)
>>> >> [ 0.553330] ACPI: Added _OSI(3.0 _SCP Extensions)
>>> >> [ 0.558017] ACPI: Added _OSI(Processor Aggregator Device)
>>> >> [ 0.565243] ACPI: Executed 1 blocks of module-level executable AML
>>> >> code
>>> >> [ 0.739624] \_SB_:_OSC invalid UUID
>>> >> [ 0.739625] _OSC request data:1 1f
>>> >> [ 0.739811] ACPI: Dynamic OEM Table Load:
>>> >> [ 0.743707] ACPI: SSDT 0xFFFF880807B5C000 00083B (v01 PmRef
>>> >> Cpu0Cst 00003001 INTL 20051117)
>>> >> [ 0.764280] ACPI: Dynamic OEM Table Load:
>>> >> [ 0.768173] ACPI: SSDT 0xFFFF880807049C00 000303 (v01 PmRef ApIst
>>> >> 00003000 INTL 20051117)
>>> >> [ 0.788649] ACPI: Dynamic OEM Table Load:
>>> >> [ 0.792543] ACPI: SSDT 0xFFFF880807007C00 000119 (v01 PmRef ApCst
>>> >> 00003000 INTL 20051117)
>>> >> [ 0.813761] ACPI: Interpreter enabled
>>> >> [ 0.817329] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>>> >> State [\_S2_] (20140926/hwxface-580)
>>> >> [ 0.826523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>>> >> State [\_S3_] (20140926/hwxface-580)
>>> >> [ 0.835727] ACPI: (supports S0 S1 S4 S5)
>>> >> [ 0.839628] ACPI: Using IOAPIC for interrupt routing
>>> >> [ 0.844615] HEST: Table parsing has been initialized.
>>> >> [ 0.849610] PCI: Using host bridge windows from ACPI; if necessary,
>>> >> use "pci=nocrs" and report a bug
>>> >> [ 0.863689] ACPI: Power Resource [FN00] (off)
>>> >> [ 0.868006] ACPI: Power Resource [FN01] (off)
>>> >> [ 0.872344] ACPI: Power Resource [FN02] (off)
>>> >> [ 0.876682] ACPI: Power Resource [FN03] (off)
>>> >> [ 0.881022] ACPI: Power Resource [FN04] (off)
>>> >> [ 0.885681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>>> >> [ 0.891767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
>>> >> ClockPM Segments MSI]
>>> >> [ 0.900002] acpi PNP0A08:00: _OSC: platform does not support
>>> >> [PCIeHotplug PME]
>>> >> [ 0.907216] acpi PNP0A08:00: _OSC: OS now controls [AER
>>> >> PCIeCapability]
>>> >> [ 0.914173] PCI host bridge to bus 0000:00
>>> >> [ 0.918169] pci_bus 0000:00: root bus resource [bus 00-fe]
>>> >> [ 0.923636] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
>>> >> [ 0.929798] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
>>> >> [ 0.935959] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000a0000-0x000bffff]
>>> >> [ 0.942817] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000cc000-0x000cffff]
>>> >> [ 0.949673] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000d0000-0x000d3fff]
>>> >> [ 0.956530] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000d4000-0x000d7fff]
>>> >> [ 0.963386] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000d8000-0x000dbfff]
>>> >> [ 0.970243] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000dc000-0x000dffff]
>>> >> [ 0.977101] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000e0000-0x000e3fff]
>>> >> [ 0.983957] pci_bus 0000:00: root bus resource [mem
>>> >> 0x000e4000-0x000e7fff]
>>> >> [ 0.990814] pci_bus 0000:00: root bus resource [mem
>>> >> 0xd0000000-0xfeafffff]
>>> >> [ 0.997674] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
>>> >> [ 0.997751] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
>>> >> [ 0.997831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>> >> [ 0.997870] pci 0000:00:01.0: System wakeup disabled by ACPI
>>> >> [ 1.003450] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
>>> >> [ 1.003473] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
>>> >> [ 1.003502] pci 0000:00:01.1: System wakeup disabled by ACPI
>>> >> [ 1.009121] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>>> >> [ 1.009138] pci 0000:00:19.0: reg 0x10: [mem 0xdfb00000-0xdfb1ffff]
>>> >> [ 1.009145] pci 0000:00:19.0: reg 0x14: [mem 0xdfb25000-0xdfb25fff]
>>> >> [ 1.009153] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
>>> >> [ 1.009212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>> >> [ 1.009246] pci 0000:00:19.0: System wakeup disabled by ACPI
>>> >> [ 1.014835] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>>> >> [ 1.014854] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb24000-0xdfb243ff]
>>> >> [ 1.014938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>>> >> [ 1.014983] pci 0000:00:1a.0: System wakeup disabled by ACPI
>>> >> [ 1.020571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>>> >> [ 1.020648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>> >> [ 1.020686] pci 0000:00:1c.0: System wakeup disabled by ACPI
>>> >> [ 1.026274] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
>>> >> [ 1.026351] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>>> >> [ 1.026388] pci 0000:00:1c.4: System wakeup disabled by ACPI
>>> >> [ 1.031981] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>>> >> [ 1.032000] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb23000-0xdfb233ff]
>>> >> [ 1.032084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>>> >> [ 1.032129] pci 0000:00:1d.0: System wakeup disabled by ACPI
>>> >> [ 1.037718] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>>> >> [ 1.037791] pci 0000:00:1e.0: System wakeup disabled by ACPI
>>> >> [ 1.043379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
>>> >> [ 1.043532] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>>> >> [ 1.043549] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
>>> >> [ 1.043556] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
>>> >> [ 1.043563] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
>>> >> [ 1.043570] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
>>> >> [ 1.043577] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
>>> >> [ 1.043584] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb22000-0xdfb227ff]
>>> >> [ 1.043625] pci 0000:00:1f.2: PME# supported from D3hot
>>> >> [ 1.043684] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>>> >> [ 1.043697] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb21000-0xdfb210ff
>>> >> 64bit]
>>> >> [ 1.043716] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
>>> >> [ 1.043832] pci 0000:00:01.0: PCI bridge to [bus 01]
>>> >> [ 1.048735] pci 0000:02:00.0: [8086:1572] type 00 class 0x020000
>>> >> [ 1.048745] pci 0000:02:00.0: reg 0x10: [mem 0xdd800000-0xddffffff
>>> >> 64bit pref]
>>> >> [ 1.048755] pci 0000:02:00.0: reg 0x1c: [mem 0xde808000-0xde80ffff
>>> >> 64bit pref]
>>> >> [ 1.048764] pci 0000:02:00.0: reg 0x30: [mem 0xdfa80000-0xdfafffff
>>> >> pref]
>>> >> [ 1.048800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>>> >> [ 1.048818] pci 0000:02:00.0: reg 0x184: [mem 0xde400000-0xde40ffff
>>> >> 64bit pref]
>>> >> [ 1.048827] pci 0000:02:00.0: reg 0x190: [mem 0xde910000-0xde913fff
>>> >> 64bit pref]
>>> >> [ 1.048862] pci 0000:02:00.1: [8086:1572] type 00 class 0x020000
>>> >> [ 1.048872] pci 0000:02:00.1: reg 0x10: [mem 0xdd000000-0xdd7fffff
>>> >> 64bit pref]
>>> >> [ 1.048882] pci 0000:02:00.1: reg 0x1c: [mem 0xde800000-0xde807fff
>>> >> 64bit pref]
>>> >> [ 1.048891] pci 0000:02:00.1: reg 0x30: [mem 0xdfa00000-0xdfa7ffff
>>> >> pref]
>>> >> [ 1.048925] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
>>> >> [ 1.048942] pci 0000:02:00.1: reg 0x184: [mem 0xde000000-0xde00ffff
>>> >> 64bit pref]
>>> >> [ 1.048951] pci 0000:02:00.1: reg 0x190: [mem 0xde810000-0xde813fff
>>> >> 64bit pref]
>>> >> [ 1.056725] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>>> >> [ 1.061856] pci 0000:00:01.1: bridge window [mem
>>> >> 0xdfa00000-0xdfafffff]
>>> >> [ 1.061858] pci 0000:00:01.1: bridge window [mem
>>> >> 0xdd000000-0xdeafffff 64bit pref]
>>> >> [ 1.061915] pci 0000:00:1c.0: PCI bridge to [bus 04]
>>> >> [ 1.066903] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
>>> >> [ 1.066942] pci 0000:05:00.0: reg 0x10: [mem 0xdf900000-0xdf91ffff]
>>> >> [ 1.066987] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
>>> >> [ 1.067010] pci 0000:05:00.0: reg 0x1c: [mem 0xdf920000-0xdf923fff]
>>> >> [ 1.067239] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
>>> >> [ 1.067289] pci 0000:05:00.0: System wakeup disabled by ACPI
>>> >> [ 1.080881] pci 0000:00:1c.4: PCI bridge to [bus 05]
>>> >> [ 1.085759] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>>> >> [ 1.085762] pci 0000:00:1c.4: bridge window [mem
>>> >> 0xdf900000-0xdf9fffff]
>>> >> [ 1.085807] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
>>> >> [ 1.085822] pci 0000:06:03.0: reg 0x10: [mem 0xdc000000-0xdcffffff
>>> >> pref]
>>> >> [ 1.085831] pci 0000:06:03.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
>>> >> [ 1.085839] pci 0000:06:03.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
>>> >> [ 1.085948] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive
>>> >> decode)
>>> >> [ 1.092645] pci 0000:00:1e.0: bridge window [mem
>>> >> 0xdf000000-0xdf8fffff]
>>> >> [ 1.092650] pci 0000:00:1e.0: bridge window [mem
>>> >> 0xdc000000-0xdcffffff 64bit pref]
>>> >> [ 1.092651] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
>>> >> (subtractive decode)
>>> >> [ 1.092652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
>>> >> (subtractive decode)
>>> >> [ 1.092653] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000a0000-0x000bffff] (subtractive decode)
>>> >> [ 1.092655] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000cc000-0x000cffff] (subtractive decode)
>>> >> [ 1.092656] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000d0000-0x000d3fff] (subtractive decode)
>>> >> [ 1.092657] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000d4000-0x000d7fff] (subtractive decode)
>>> >> [ 1.092658] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000d8000-0x000dbfff] (subtractive decode)
>>> >> [ 1.092659] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000dc000-0x000dffff] (subtractive decode)
>>> >> [ 1.092660] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000e0000-0x000e3fff] (subtractive decode)
>>> >> [ 1.092661] pci 0000:00:1e.0: bridge window [mem
>>> >> 0x000e4000-0x000e7fff] (subtractive decode)
>>> >> [ 1.092662] pci 0000:00:1e.0: bridge window [mem
>>> >> 0xd0000000-0xfeafffff] (subtractive decode)
>>> >> [ 1.092690] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
>>> >> unsupported)
>>> >> [ 1.100314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
>>> >> 14 15)
>>> >> [ 1.107107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12
>>> >> 14 15)
>>> >> [ 1.113962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12
>>> >> 14 15)
>>> >> [ 1.120818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12
>>> >> 14 15)
>>> >> [ 1.127675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12
>>> >> 14 15)
>>> >> [ 1.134531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
>>> >> 14 15) *0, disabled.
>>> >> [ 1.142515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12
>>> >> 14 15) *0, disabled.
>>> >> [ 1.150505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12
>>> >> 14 15)
>>> >> [ 1.157484] ACPI: Enabled 4 GPEs in block 00 to 3F
>>> >> [ 1.162221] vgaarb: setting as boot device: PCI:0000:06:03.0
>>> >> [ 1.167794] vgaarb: device added:
>>> >> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
>>> >> [ 1.175867] vgaarb: loaded
>>> >> [ 1.178556] vgaarb: bridge control possible 0000:06:03.0
>>> >> [ 1.183909] PCI: Using ACPI for IRQ routing
>>> >> [ 1.193792] PCI: pci_cache_line_size set to 64 bytes
>>> >> [ 1.193833] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
>>> >> [ 1.193834] e820: reserve RAM buffer [mem 0xbecc9000-0xbfffffff]
>>> >> [ 1.193835] e820: reserve RAM buffer [mem 0xce492000-0xcfffffff]
>>> >> [ 1.193836] e820: reserve RAM buffer [mem 0xce5c7000-0xcfffffff]
>>> >> [ 1.193837] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
>>> >> [ 1.193935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>>> >> [ 1.199994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>>> >> [ 1.207831] Switched to clocksource hpet
>>> >> [ 1.215086] pnp: PnP ACPI init
>>> >> [ 1.218096] system 00:00: [mem 0xfed40000-0xfed44fff] has been
>>> >> reserved
>>> >> [ 1.224641] system 00:00: Plug and Play ACPI device, IDs PNP0c01
>>> >> (active)
>>> >> [ 1.224688] system 00:01: [io 0x0680-0x069f] has been reserved
>>> >> [ 1.230542] system 00:01: [io 0x1000-0x100f] has been reserved
>>> >> [ 1.236442] system 00:01: [io 0xffff] has been reserved
>>> >> [ 1.241736] system 00:01: [io 0xffff] has been reserved
>>> >> [ 1.247031] system 00:01: [io 0x0400-0x0453] could not be reserved
>>> >> [ 1.253282] system 00:01: [io 0x0458-0x047f] has been reserved
>>> >> [ 1.259182] system 00:01: [io 0x0500-0x057f] has been reserved
>>> >> [ 1.265084] system 00:01: [io 0x164e-0x164f] has been reserved
>>> >> [ 1.270987] system 00:01: Plug and Play ACPI device, IDs PNP0c02
>>> >> (active)
>>> >> [ 1.271008] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
>>> >> (active)
>>> >> [ 1.271039] system 00:03: [io 0x0454-0x0457] has been reserved
>>> >> [ 1.276891] system 00:03: Plug and Play ACPI device, IDs INT3f0d
>>> >> PNP0c02 (active)
>>> >> [ 1.276924] system 00:04: [io 0x04d0-0x04d1] has been reserved
>>> >> [ 1.282792] system 00:04: Plug and Play ACPI device, IDs PNP0c02
>>> >> (active)
>>> >> [ 1.282868] system 00:05: [io 0x0a00-0x0a1f] has been reserved
>>> >> [ 1.288693] system 00:05: [io 0x0a30-0x0a3f] has been reserved
>>> >> [ 1.294594] system 00:05: Plug and Play ACPI device, IDs PNP0c02
>>> >> (active)
>>> >> [ 1.294751] pnp 00:06: [dma 0 disabled]
>>> >> [ 1.294780] pnp 00:06: Plug and Play ACPI device, IDs PNP0501
>>> >> (active)
>>> >> [ 1.294921] pnp 00:07: [dma 0 disabled]
>>> >> [ 1.294947] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
>>> >> (active)
>>> >> [ 1.295019] system 00:08: [io 0x0b00-0x0b7f] has been reserved
>>> >> [ 1.300845] system 00:08: Plug and Play ACPI device, IDs PNP0c02
>>> >> (active)
>>> >> [ 1.300958] pnp 00:09: [dma 0 disabled]
>>> >> [ 1.300985] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
>>> >> (active)
>>> >> [ 1.301064] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001
>>> >> (active)
>>> >> [ 1.301198] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been
>>> >> reserved
>>> >> [ 1.307720] system 00:0b: [mem 0xfed10000-0xfed17fff] has been
>>> >> reserved
>>> >> [ 1.314314] system 00:0b: [mem 0xfed18000-0xfed18fff] has been
>>> >> reserved
>>> >> [ 1.320909] system 00:0b: [mem 0xfed19000-0xfed19fff] has been
>>> >> reserved
>>> >> [ 1.327506] system 00:0b: [mem 0xe0000000-0xefffffff] has been
>>> >> reserved
>>> >> [ 1.334102] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been
>>> >> reserved
>>> >> [ 1.340701] system 00:0b: [mem 0xfed90000-0xfed93fff] has been
>>> >> reserved
>>> >> [ 1.347295] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been
>>> >> reserved
>>> >> [ 1.353892] system 00:0b: [mem 0xff000000-0xffffffff] has been
>>> >> reserved
>>> >> [ 1.360488] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
>>> >> reserved
>>> >> [ 1.367430] system 00:0b: [mem 0xd0000000-0xd0000fff] has been
>>> >> reserved
>>> >> [ 1.374027] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
>>> >> (active)
>>> >> [ 1.374113] pnp: PnP ACPI: found 12 devices
>>> >> [ 1.384167] pci 0000:00:01.0: PCI bridge to [bus 01]
>>> >> [ 1.389053] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>>> >> [ 1.394250] pci 0000:00:01.1: bridge window [mem
>>> >> 0xdfa00000-0xdfafffff]
>>> >> [ 1.401020] pci 0000:00:01.1: bridge window [mem
>>> >> 0xdd000000-0xdeafffff 64bit pref]
>>> >> [ 1.408745] pci 0000:00:1c.0: PCI bridge to [bus 04]
>>> >> [ 1.413701] pci 0000:00:1c.4: PCI bridge to [bus 05]
>>> >> [ 1.418641] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>>> >> [ 1.424718] pci 0000:00:1c.4: bridge window [mem
>>> >> 0xdf900000-0xdf9fffff]
>>> >> [ 1.431489] pci 0000:00:1e.0: PCI bridge to [bus 06]
>>> >> [ 1.436435] pci 0000:00:1e.0: bridge window [mem
>>> >> 0xdf000000-0xdf8fffff]
>>> >> [ 1.443203] pci 0000:00:1e.0: bridge window [mem
>>> >> 0xdc000000-0xdcffffff 64bit pref]
>>> >> [ 1.450929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>>> >> [ 1.450931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>>> >> [ 1.450932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>>> >> [ 1.450933] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
>>> >> [ 1.450934] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
>>> >> [ 1.450935] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
>>> >> [ 1.450936] pci_bus 0000:00: resource 10 [mem
>>> >> 0x000d8000-0x000dbfff]
>>> >> [ 1.450937] pci_bus 0000:00: resource 11 [mem
>>> >> 0x000dc000-0x000dffff]
>>> >> [ 1.450938] pci_bus 0000:00: resource 12 [mem
>>> >> 0x000e0000-0x000e3fff]
>>> >> [ 1.450939] pci_bus 0000:00: resource 13 [mem
>>> >> 0x000e4000-0x000e7fff]
>>> >> [ 1.450940] pci_bus 0000:00: resource 14 [mem
>>> >> 0xd0000000-0xfeafffff]
>>> >> [ 1.450941] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
>>> >> [ 1.450942] pci_bus 0000:02: resource 2 [mem 0xdd000000-0xdeafffff
>>> >> 64bit pref]
>>> >> [ 1.450943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
>>> >> [ 1.450944] pci_bus 0000:05: resource 1 [mem 0xdf900000-0xdf9fffff]
>>> >> [ 1.450946] pci_bus 0000:06: resource 1 [mem 0xdf000000-0xdf8fffff]
>>> >> [ 1.450947] pci_bus 0000:06: resource 2 [mem 0xdc000000-0xdcffffff
>>> >> 64bit pref]
>>> >> [ 1.450948] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
>>> >> [ 1.450949] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
>>> >> [ 1.450950] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
>>> >> [ 1.450951] pci_bus 0000:06: resource 7 [mem 0x000cc000-0x000cffff]
>>> >> [ 1.450952] pci_bus 0000:06: resource 8 [mem 0x000d0000-0x000d3fff]
>>> >> [ 1.450953] pci_bus 0000:06: resource 9 [mem 0x000d4000-0x000d7fff]
>>> >> [ 1.450954] pci_bus 0000:06: resource 10 [mem
>>> >> 0x000d8000-0x000dbfff]
>>> >> [ 1.450955] pci_bus 0000:06: resource 11 [mem
>>> >> 0x000dc000-0x000dffff]
>>> >> [ 1.450956] pci_bus 0000:06: resource 12 [mem
>>> >> 0x000e0000-0x000e3fff]
>>> >> [ 1.450957] pci_bus 0000:06: resource 13 [mem
>>> >> 0x000e4000-0x000e7fff]
>>> >> [ 1.450958] pci_bus 0000:06: resource 14 [mem
>>> >> 0xd0000000-0xfeafffff]
>>> >> [ 1.451014] NET: Registered protocol family 2
>>> >> [ 1.455462] TCP established hash table entries: 262144 (order: 9,
>>> >> 2097152 bytes)
>>> >> [ 1.463005] TCP bind hash table entries: 65536 (order: 8, 1048576
>>> >> bytes)
>>> >> [ 1.469713] TCP: Hash tables configured (established 262144 bind
>>> >> 65536)
>>> >> [ 1.476246] TCP: reno registered
>>> >> [ 1.479464] UDP hash table entries: 16384 (order: 7, 524288 bytes)
>>> >> [ 1.485680] UDP-Lite hash table entries: 16384 (order: 7, 524288
>>> >> bytes)
>>> >> [ 1.492306] NET: Registered protocol family 1
>>> >> [ 1.496818] PCI: CLS mismatch (64 != 32), using 64 bytes
>>> >> [ 1.496823] pci 0000:06:03.0: Video device with shadowed ROM
>>> >> [ 1.496853] Unpacking initramfs...
>>> >> [ 1.690454] Freeing initrd memory: 15968K (ffff8800360c0000 -
>>> >> ffff880037058000)
>>> >> [ 1.697700] PCI-DMA: Using software bounce buffering for IO
>>> >> (SWIOTLB)
>>> >> [ 1.704118] software IO TLB [mem 0xca492000-0xce492000] (64MB)
>>> >> mapped at [ffff8800ca492000-ffff8800ce491fff]
>>> >> [ 1.714164] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
>>> >> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>>> >> [ 1.724674] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.730426] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.736250] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.750730] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.756546] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.762360] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.768179] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.773991] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
>>> >> [ 1.779835] microcode: Microcode Update Driver: v2.00
>>> >> <***@aivazian.fsnet.co.uk>, Peter Oruba
>>> >> [ 1.788826] futex hash table entries: 2048 (order: 5, 131072 bytes)
>>> >> [ 1.795033] audit: initializing netlink subsys (disabled)
>>> >> [ 1.800388] audit: type=2000 audit(1443100076.548:1): initialized
>>> >> [ 1.806664] HugeTLB registered 2 MB page size, pre-allocated 0
>>> >> pages
>>> >> [ 1.812933] zpool: loaded
>>> >> [ 1.815517] zbud: loaded
>>> >> [ 1.818158] VFS: Disk quotas dquot_6.5.2
>>> >> [ 1.821997] Dquot-cache hash table entries: 512 (order 0, 4096
>>> >> bytes)
>>> >> [ 1.828445] msgmni has been set to 32768
>>> >> [ 1.832595] alg: No test for stdrng (krng)
>>> >> [ 1.836625] Block layer SCSI generic (bsg) driver version 0.4
>>> >> loaded (major 252)
>>> >> [ 1.844014] io scheduler noop registered
>>> >> [ 1.847878] io scheduler deadline registered
>>> >> [ 1.852131] io scheduler cfq registered (default)
>>> >> [ 1.856959] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>>> >> [ 1.857070] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
>>> >> [ 1.857283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>> >> [ 1.862775] pciehp: PCI Express Hot Plug Controller Driver version:
>>> >> 0.4
>>> >> [ 1.869391] intel_idle: MWAIT substates: 0x1120
>>> >> [ 1.869392] intel_idle: v0.4 model 0x3A
>>> >> [ 1.869393] intel_idle: lapic_timer_reliable_states 0xffffffff
>>> >> [ 1.869628] ERST: Error Record Serialization Table (ERST) support
>>> >> is initialized.
>>> >> [ 1.877034] pstore: Registered erst as persistent store backend
>>> >> [ 1.882975] GHES: APEI firmware first mode is enabled by WHEA _OSC.
>>> >> [ 1.889229] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>>> >> [ 1.915898] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
>>> >> is a 16550A
>>> >> [ 1.943574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
>>> >> is a 16550A
>>> >> [ 1.971232] 00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud =
>>> >> 115200) is a 16550A
>>> >> [ 1.978753] Linux agpgart interface v0.103
>>> >> [ 1.982831] i8042: PNP: No PS/2 controller found. Probing ports
>>> >> directly.
>>> >> [ 1.992701] serio: i8042 KBD port at 0x60,0x64 irq 1
>>> >> [ 1.997575] serio: i8042 AUX port at 0x60,0x64 irq 12
>>> >> [ 2.002720] mousedev: PS/2 mouse device common for all mice
>>> >> [ 2.008232] rtc_cmos 00:02: RTC can wake from S4
>>> >> [ 2.012908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>>> >> [ 2.018943] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
>>> >> nvram, hpet irqs
>>> >> [ 2.026564] ledtrig-cpu: registered to indicate activity on CPUs
>>> >> [ 2.032717] AMD IOMMUv2 driver by Joerg Roedel
>>> >> <***@amd.com>
>>> >> [ 2.039059] AMD IOMMUv2 functionality not available on this system
>>> >> [ 2.045283] TCP: cubic registered
>>> >> [ 2.048521] IPv6: Loaded, but administratively disabled, reboot
>>> >> required to enable
>>> >> [ 2.056071] mip6: Mobile IPv6
>>> >> [ 2.059020] mip6: mip6_init: can't add xfrm type(destopt)
>>> >> [ 2.064404] NET: Registered protocol family 17
>>> >> [ 2.068836] mpls_gso: MPLS GSO support
>>> >> [ 2.072972] registered taskstats version 1
>>> >> [ 2.077499] rtc_cmos 00:02: setting system clock to 2015-09-24
>>> >> 13:07:57 UTC (1443100077)
>>> >> [ 2.085560] PM: Hibernation image not present or could not be
>>> >> loaded.
>>> >> [ 2.086094] Freeing unused kernel memory: 1228K (ffffffff818f3000 -
>>> >> ffffffff81a26000)
>>> >> [ 2.093851] Write protecting the kernel read-only data: 8192k
>>> >> [ 2.100532] Freeing unused kernel memory: 620K (ffff880001565000 -
>>> >> ffff880001600000)
>>> >> [ 2.108556] Freeing unused kernel memory: 216K (ffff8800017ca000 -
>>> >> ffff880001800000)
>>> >> [ 2.123393] udevd[94]: starting version 175
>>> >> [ 2.131920] pps_core: LinuxPPS API ver. 1 registered
>>> >> [ 2.136823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
>>> >> Rodolfo Giometti <***@linux.it>
>>> >> [ 2.147106] PTP clock support registered
>>> >> [ 2.151071] ACPI: bus type USB registered
>>> >> [ 2.155038] usbcore: registered new interface driver usbfs
>>> >> [ 2.160469] usbcore: registered new interface driver hub
>>> >> [ 2.165787] usbcore: registered new device driver usb
>>> >> [ 2.171019] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>>> >> [ 2.176789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>>> >> [ 2.182928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>>> >> Driver
>>> >> [ 2.189595] ehci-pci: EHCI PCI platform driver
>>> >> [ 2.194192] i40e: Intel(R) Ethernet Connection XL710 Network Driver
>>> >> - version 1.3.39.1
>>> >> [ 2.197599] e1000e 0000:00:19.0: Interrupt Throttling Rate
>>> >> (ints/sec) set to dynamic conservative mode
>>> >> [ 2.197641] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>>> >> [ 2.198073] thermal LNXTHERM:00: registered as thermal_zone0
>>> >> [ 2.198073] ACPI: Thermal Zone [TZ00] (28 C)
>>> >> [ 2.198216] thermal LNXTHERM:01: registered as thermal_zone1
>>> >> [ 2.198216] ACPI: Thermal Zone [TZ01] (30 C)
>>> >> [ 2.231104] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
>>> >> [ 2.249391] i40e 0000:02:00.0: fw 4.40.35115 api 1.4 nvm 4.53
>>> >> 0x80001dc0 1.123.0
>>> >> [ 2.256998] SCSI subsystem initialized
>>> >> [ 2.261957] libata version 3.00 loaded.
>>> >> [ 2.453377] e1000e 0000:00:19.0 eth0: registered PHC clock
>>> >> [ 2.458796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width
>>> >> x1) 00:25:90:a8:02:51
>>> >> [ 2.466693] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
>>> >> Connection
>>> >> [ 2.473600] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
>>> >> FFFFFF-0FF
>>> >> [ 2.480564] ehci-pci 0000:00:1a.0: EHCI Host Controller
>>> >> [ 2.480631] e1000e 0000:05:00.0: Interrupt Throttling Rate
>>> >> (ints/sec) set to dynamic conservative mode
>>> >> [ 2.480663] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
>>> >> [ 2.480665] e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
>>> >> [ 2.480667] e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
>>> >> [ 2.495076] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
>>> >> bus number 1
>>> >> [ 2.495874] i40e 0000:02:00.0: MAC address: 3c:fd:fe:9c:56:b8
>>> >> [ 2.499857] i40e 0000:02:00.0: SAN MAC: 3c:fd:fe:9c:56:ba
>>> >> [ 2.513542] ehci-pci 0000:00:1a.0: debug port 2
>>> >> [ 2.514095] i40e 0000:02:00.0: irq 30 for MSI/MSI-X
>>> >> [ 2.514098] i40e 0000:02:00.0: irq 31 for MSI/MSI-X
>>> >> [ 2.514099] i40e 0000:02:00.0: irq 32 for MSI/MSI-X
>>> >> [ 2.514101] i40e 0000:02:00.0: irq 33 for MSI/MSI-X
>>> >> [ 2.514103] i40e 0000:02:00.0: irq 34 for MSI/MSI-X
>>> >> [ 2.514105] i40e 0000:02:00.0: irq 35 for MSI/MSI-X
>>> >> [ 2.514107] i40e 0000:02:00.0: irq 36 for MSI/MSI-X
>>> >> [ 2.514108] i40e 0000:02:00.0: irq 37 for MSI/MSI-X
>>> >> [ 2.514110] i40e 0000:02:00.0: irq 38 for MSI/MSI-X
>>> >> [ 2.514111] i40e 0000:02:00.0: irq 39 for MSI/MSI-X
>>> >> [ 2.514113] i40e 0000:02:00.0: irq 40 for MSI/MSI-X
>>> >> [ 2.514114] i40e 0000:02:00.0: irq 41 for MSI/MSI-X
>>> >> [ 2.514116] i40e 0000:02:00.0: irq 42 for MSI/MSI-X
>>> >> [ 2.514118] i40e 0000:02:00.0: irq 43 for MSI/MSI-X
>>> >> [ 2.514119] i40e 0000:02:00.0: irq 44 for MSI/MSI-X
>>> >> [ 2.514121] i40e 0000:02:00.0: irq 45 for MSI/MSI-X
>>> >> [ 2.514122] i40e 0000:02:00.0: irq 46 for MSI/MSI-X
>>> >> [ 2.514124] i40e 0000:02:00.0: irq 47 for MSI/MSI-X
>>> >> [ 2.521951] ehci-pci 0000:00:1a.0: cache line size of 64 is not
>>> >> supported
>>> >> [ 2.521964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb24000
>>> >> [ 2.537912] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>>> >> [ 2.543607] usb usb1: New USB device found, idVendor=1d6b,
>>> >> idProduct=0002
>>> >> [ 2.550333] usb usb1: New USB device strings: Mfr=3, Product=2,
>>> >> SerialNumber=1
>>> >> [ 2.557541] usb usb1: Product: EHCI Host Controller
>>> >> [ 2.562399] usb usb1: Manufacturer: Linux 3.18.20 ehci_hcd
>>> >> [ 2.568471] usb usb1: SerialNumber: 0000:00:1a.0
>>> >> [ 2.573164] hub 1-0:1.0: USB hub found
>>> >> [ 2.576818] hub 1-0:1.0: 2 ports detected
>>> >> [ 2.580962] ehci-pci 0000:00:1d.0: EHCI Host Controller
>>> >> [ 2.586095] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
>>> >> bus number 2
>>> >> [ 2.593480] ehci-pci 0000:00:1d.0: debug port 2
>>> >> [ 2.599535] e1000e 0000:05:00.0 eth2: registered PHC clock
>>> >> [ 2.601911] ehci-pci 0000:00:1d.0: cache line size of 64 is not
>>> >> supported
>>> >> [ 2.601922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb23000
>>> >> [ 2.610602] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width
>>> >> x1) 00:25:90:a8:02:50
>>> >> [ 2.613936] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>>> >> [ 2.613963] usb usb2: New USB device found, idVendor=1d6b,
>>> >> idProduct=0002
>>> >> [ 2.613964] usb usb2: New USB device strings: Mfr=3, Product=2,
>>> >> SerialNumber=1
>>> >> [ 2.613965] usb usb2: Product: EHCI Host Controller
>>> >> [ 2.613965] usb usb2: Manufacturer: Linux 3.18.20 ehci_hcd
>>> >> [ 2.613966] usb usb2: SerialNumber: 0000:00:1d.0
>>> >> [ 2.614075] hub 2-0:1.0: USB hub found
>>> >> [ 2.614078] hub 2-0:1.0: 2 ports detected
>>> >> [ 2.614192] ahci 0000:00:1f.2: version 3.0
>>> >> [ 2.614340] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
>>> >> [ 2.614485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3
>>> >> Gbps 0x3f impl SATA mode
>>> >> [ 2.614486] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
>>> >> part ems apst
>>> >> [ 2.626630] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x8
>>> >> [ 2.654604] scsi host0: ahci
>>> >> [ 2.654992] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66
>>> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>>> >> [ 2.657763] scsi host1: ahci
>>> >> [ 2.658083] scsi host2: ahci
>>> >> [ 2.658320] scsi host3: ahci
>>> >> [ 2.658546] scsi host4: ahci
>>> >> [ 2.658747] scsi host5: ahci
>>> >> [ 2.658785] ata1: SATA max UDMA/133 abar ***@0xdfb22000 port
>>> >> 0xdfb22100 irq 48
>>> >> [ 2.658788] ata2: SATA max UDMA/133 abar ***@0xdfb22000 port
>>> >> 0xdfb22180 irq 48
>>> >> [ 2.658790] ata3: SATA max UDMA/133 abar ***@0xdfb22000 port
>>> >> 0xdfb22200 irq 48
>>> >> [ 2.658792] ata4: SATA max UDMA/133 abar ***@0xdfb22000 port
>>> >> 0xdfb22280 irq 48
>>> >> [ 2.658795] ata5: SATA max UDMA/133 abar ***@0xdfb22000 port
>>> >> 0xdfb22300 irq 48
>>> >> [ 2.658798] ata6: SATA max UDMA/133 abar ***@0xdfb22000 port
>>> >> 0xdfb22380 irq 48
>>> >> [ 2.670025] i40e 0000:02:00.1: fw 4.40.35115 api 1.4 nvm 4.53
>>> >> 0x80001dc0 1.123.0
>>> >> [ 2.714122] tsc: Refined TSC clocksource calibration: 3500.024 MHz
>>> >> [ 2.769612] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network
>>> >> Connection
>>> >> [ 2.776551] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No:
>>> >> FFFFFF-0FF
>>> >> [ 2.890322] usb 1-1: new high-speed USB device number 2 using
>>> >> ehci-pci
>>> >> [ 2.916415] i40e 0000:02:00.1: MAC address: 3c:fd:fe:9c:56:b9
>>> >> [ 2.926260] i40e 0000:02:00.1: SAN MAC: 3c:fd:fe:9c:56:bb
>>> >> [ 2.930381] usb 2-1: new high-speed USB device number 2 using
>>> >> ehci-pci
>>> >> [ 2.952496] i40e 0000:02:00.1: irq 49 for MSI/MSI-X
>>> >> [ 2.952503] i40e 0000:02:00.1: irq 50 for MSI/MSI-X
>>> >> [ 2.952508] i40e 0000:02:00.1: irq 51 for MSI/MSI-X
>>> >> [ 2.952512] i40e 0000:02:00.1: irq 52 for MSI/MSI-X
>>> >> [ 2.952516] i40e 0000:02:00.1: irq 53 for MSI/MSI-X
>>> >> [ 2.952520] i40e 0000:02:00.1: irq 54 for MSI/MSI-X
>>> >> [ 2.952525] i40e 0000:02:00.1: irq 55 for MSI/MSI-X
>>> >> [ 2.952537] i40e 0000:02:00.1: irq 56 for MSI/MSI-X
>>> >> [ 2.952539] i40e 0000:02:00.1: irq 57 for MSI/MSI-X
>>> >> [ 2.952541] i40e 0000:02:00.1: irq 58 for MSI/MSI-X
>>> >> [ 2.952543] i40e 0000:02:00.1: irq 59 for MSI/MSI-X
>>> >> [ 2.952545] i40e 0000:02:00.1: irq 60 for MSI/MSI-X
>>> >> [ 2.952547] i40e 0000:02:00.1: irq 61 for MSI/MSI-X
>>> >> [ 2.952549] i40e 0000:02:00.1: irq 62 for MSI/MSI-X
>>> >> [ 2.952550] i40e 0000:02:00.1: irq 63 for MSI/MSI-X
>>> >> [ 2.952554] i40e 0000:02:00.1: irq 64 for MSI/MSI-X
>>> >> [ 2.952556] i40e 0000:02:00.1: irq 65 for MSI/MSI-X
>>> >> [ 2.952558] i40e 0000:02:00.1: irq 66 for MSI/MSI-X
>>> >> [ 2.978497] ata5: SATA link down (SStatus 0 SControl 300)
>>> >> [ 2.983838] ata6: SATA link down (SStatus 0 SControl 300)
>>> >> [ 2.989225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>> >> [ 2.995381] ata4: SATA link down (SStatus 0 SControl 300)
>>> >> [ 3.000756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>> >> [ 3.007184] ata2: SATA link down (SStatus 0 SControl 300)
>>> >> [ 3.012510] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>>> >> succeeded
>>> >> [ 3.012514] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>>> >> LOCK) filtered out
>>> >> [ 3.020391] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>>> >> CONFIGURATION OVERLAY) filtered out
>>> >> [ 3.026954] usb 1-1: New USB device found, idVendor=8087,
>>> >> idProduct=0024
>>> >> [ 3.026955] usb 1-1: New USB device strings: Mfr=0, Product=0,
>>> >> SerialNumber=0
>>> >> [ 3.027240] hub 1-1:1.0: USB hub found
>>> >> [ 3.027332] hub 1-1:1.0: 6 ports detected
>>> >> [ 3.050510] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>>> >> succeeded
>>> >> [ 3.050512] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>>> >> LOCK) filtered out
>>> >> [ 3.061847] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x8
>>> >> [ 3.067012] usb 2-1: New USB device found, idVendor=8087,
>>> >> idProduct=0024
>>> >> [ 3.067013] usb 2-1: New USB device strings: Mfr=0, Product=0,
>>> >> SerialNumber=0
>>> >> [ 3.067296] hub 2-1:1.0: USB hub found
>>> >> [ 3.067384] hub 2-1:1.0: 6 ports detected
>>> >> [ 3.090237] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66
>>> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>>> >> [ 3.103551] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>>> >> CONFIGURATION OVERLAY) filtered out
>>> >> [ 3.112266] ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10250, max
>>> >> UDMA/133
>>> >> [ 3.118799] ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth
>>> >> 31/32)
>>> >> [ 3.125486] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, 1.00, max
>>> >> UDMA/133
>>> >> [ 3.132254] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>>> >> succeeded
>>> >> [ 3.132259] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>>> >> LOCK) filtered out
>>> >> [ 3.140106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>>> >> CONFIGURATION OVERLAY) filtered out
>>> >> [ 3.148916] ata1.00: configured for UDMA/133
>>> >> [ 3.153298] scsi 0:0:0:0: Direct-Access ATA INTEL
>>> >> SSDSC2BA20 0250 PQ: 0 ANSI: 5
>>> >> [ 3.154140] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>>> >> succeeded
>>> >> [ 3.154142] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
>>> >> LOCK) filtered out
>>> >> [ 3.154143] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>>> >> CONFIGURATION OVERLAY) filtered out
>>> >> [ 3.156130] ata3.00: configured for UDMA/133
>>> >> [ 3.185352] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N
>>> >> 1.00 PQ: 0 ANSI: 5
>>> >> [ 3.298953] usb 1-1.2: new full-speed USB device number 3 using
>>> >> ehci-pci
>>> >> [ 3.323219] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks:
>>> >> (200 GB/186 GiB)
>>> >> [ 3.330670] sd 0:0:0:0: [sda] Write Protect is off
>>> >> [ 3.335418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> >> [ 3.335427] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>>> >> enabled, doesn't support DPO or FUA
>>> >> [ 3.338917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
>>> >> dvd-ram cd/rw xa/form2 cdda tray
>>> >> [ 3.338918] cdrom: Uniform CD-ROM driver Revision: 3.20
>>> >> [ 3.339081] sr 2:0:0:0: Attached scsi CD-ROM sr0
>>> >> [ 3.358408] sd 0:0:0:0: Attached scsi generic sg0 type 0
>>> >> [ 3.358668] sda: sda1 sda2
>>> >> [ 3.358886] sd 0:0:0:0: [sda] Attached SCSI disk
>>> >> [ 3.371134] sr 2:0:0:0: Attached scsi generic sg1 type 5
>>> >> [ 3.396737] usb 1-1.2: New USB device found, idVendor=0557,
>>> >> idProduct=2221
>>> >> [ 3.403526] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
>>> >> SerialNumber=0
>>> >> [ 3.410814] usb 1-1.2: Product: Hermon USB hidmouse Device
>>> >> [ 3.416282] usb 1-1.2: Manufacturer: Winbond Electronics Corp
>>> >> [ 3.423736] hidraw: raw HID events driver (C) Jiri Kosina
>>> >> [ 3.430436] usbcore: registered new interface driver usbhid
>>> >> [ 3.435922] usbhid: USB HID core driver
>>> >> [ 3.440716] input: Winbond Electronics Corp Hermon USB hidmouse
>>> >> Device as
>>> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
>>> 1.2:1.0/0003:0557:2221.0001/input/input2
>>> >> [ 3.455434] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID
>>> >> v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on
>>> >> usb-0000:00:1a.0-1.2/input0
>>> >> [ 3.470147] input: Winbond Electronics Corp Hermon USB hidmouse
>>> >> Device as
>>> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
>>> 1.2:1.1/0003:0557:2221.0002/input/input3
>>> >> [ 3.484849] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID
>>> >> v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device]
>>> >> on usb-0000:00:1a.0-1.2/input1
>>> >> [ 3.507384] PM: Starting manual resume from disk
>>> >> [ 3.511922] PM: Hibernation image partition 8:1 present
>>> >> [ 3.511923] PM: Looking for hibernation image.
>>> >> [ 3.512127] PM: Image not found (code -22)
>>> >> [ 3.512131] PM: Hibernation image not present or could not be
>>> >> loaded.
>>> >> [ 3.517313] EXT4-fs (sda2): mounting ext3 file system using the
>>> >> ext4 subsystem
>>> >> [ 3.529000] EXT4-fs (sda2): mounted filesystem with ordered data
>>> >> mode. Opts: (null)
>>> >> [ 3.715841] Switched to clocksource tsc
>>> >> [ 3.885031] udevd[667]: starting version 175
>>> >> [ 4.011695] input: Power Button as
>>> >> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>>> >> [ 4.020070] ACPI: Power Button [PWRB]
>>> >> [ 4.023703] input: Power Button as
>>> >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>>> >> [ 4.031033] ACPI: Power Button [PWRF]
>>> >> [ 4.034781] EDAC MC: Ver: 3.0.0
>>> >> [ 4.038626] EDAC MC0: Giving out device to module ie31200_edac
>>> >> controller IE31200: DEV 0000:00:00.0 (POLLED)
>>> >> [ 4.115904] ipmi message handler version 39.2
>>> >> [ 4.121319] IPMI System Interface driver.
>>> >> [ 4.126068] ipmi_si: probing via ACPI
>>> >> [ 4.129851] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
>>> >> [ 4.135777] i40e 0000:02:00.1 rename5: renamed from eth3
>>> >> [ 4.141149] ipmi_si: Adding ACPI-specified kcs state machine
>>> >> [ 4.147092] ipmi_si: probing via SMBIOS
>>> >> [ 4.147160] input: PC Speaker as
>>> >> /devices/platform/pcspkr/input/input6
>>> >> [ 4.157409] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
>>> >> [ 4.163305] ipmi_si: Adding SMBIOS-specified kcs state machine
>>> >> duplicate interface
>>> >> [ 4.170854] ipmi_si: probing via SPMI
>>> >> [ 4.174504] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
>>> >> [ 4.177849] i40e 0000:02:00.0 rename3: renamed from eth1
>>> >> [ 4.185527] ipmi_si: Adding SPMI-specified kcs state machine
>>> >> [ 4.185655] ACPI Warning: SystemIO range
>>> >> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
>>> >> 0x0000000000000400-0x000000000000047F (\PMIO) (20140926/utaddress-254)
>>> >> [ 4.185658] ACPI: If an ACPI driver is available for this device,
>>> >> you should use it instead of the native driver
>>> >> [ 4.185660] ACPI Warning: SystemIO range
>>> >> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
>>> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>>> >> [ 4.185662] ACPI: If an ACPI driver is available for this device,
>>> >> you should use it instead of the native driver
>>> >> [ 4.185662] ACPI Warning: SystemIO range
>>> >> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
>>> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>>> >> [ 4.185664] ACPI: If an ACPI driver is available for this device,
>>> >> you should use it instead of the native driver
>>> >> [ 4.185664] ACPI Warning: SystemIO range
>>> >> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
>>> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-254)
>>> >> [ 4.185665] ACPI: If an ACPI driver is available for this device,
>>> >> you should use it instead of the native driver
>>> >> [ 4.185665] lpc_ich: Resource conflict(s) found affecting gpio_ich
>>> >> [ 4.280990] iTCO_vendor_support: vendor-support=0
>>> >> [ 4.304270] duplicate interface
>>> >> [ 4.307664] ipmi_si: Trying ACPI-specified kcs state machine at i/o
>>> >> address 0xca2, slave address 0x0, irq 0
>>> >> [ 4.318187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>>> >> [ 4.323711] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
>>> >> TCOBASE=0x0460)
>>> >> [ 4.323818] e1000e 0000:00:19.0 eth3: renamed from eth0
>>> >> [ 4.336446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>>> >> [ 4.342474] AVX version of gcm_enc/dec engaged.
>>> >> [ 4.346907] AES CTR mode by8 optimization enabled
>>> >> [ 4.351931] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>>> >> [ 4.352819] alg: No test for __gcm-aes-aesni
>>> >> (__driver-gcm-aes-aesni)
>>> >> [ 4.364158] i40e 0000:02:00.1 eth1: renamed from rename5
>>> >> [ 4.370154] [drm] Initialized drm 1.1.0 20060810
>>> >> [ 4.374797] Error: Driver 'pcspkr' is already registered,
>>> >> aborting...
>>> >> [ 4.381228] alg: No test for crc32 (crc32-pclmul)
>>> >> [ 4.395990] [TTM] Zone kernel: Available graphics memory: 16494382
>>> >> kiB
>>> >> [ 4.396626] i40e 0000:02:00.0 eth0: renamed from rename3
>>> >> [ 4.407813] [TTM] Zone dma32: Available graphics memory: 2097152
>>> >> kiB
>>> >> [ 4.414324] [TTM] Initializing pool allocator
>>> >> [ 4.418678] [TTM] Initializing DMA pool allocator
>>> >> [ 4.425605] intel_rapl: Found RAPL domain package
>>> >> [ 4.430215] intel_rapl: Found RAPL domain core
>>> >> [ 4.446166] fbcon: mgadrmfb (fb0) is primary device
>>> >> [ 4.489833] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c,
>>> >> prod_id: 0x0624, dev_id: 0x20)
>>> >> [ 4.489843] ipmi_si 00:0a: IPMI kcs interface initialized
>>> >> [ 4.604074] Console: switching to colour frame buffer device 128x48
>>> >> [ 4.698245] mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer device
>>> >> [ 4.704491] mgag200 0000:06:03.0: registered panic notifier
>>> >> [ 4.733133] [drm] Initialized mgag200 1.0.0 20110418 for
>>> >> 0000:06:03.0 on minor 0
>>> >> [ 4.975874] Adding 3905532k swap on /dev/sda1. Priority:-1
>>> >> extents:1 across:3905532k SSFS
>>> >> [ 5.002394] EXT4-fs (sda2): re-mounted. Opts: (null)
>>> >> [ 5.044749] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>>> >> [ 5.077354] loop: module loaded
>>> >> [ 5.087636] Ethernet Channel Bonding Driver: v3.7.1 (April 27,
>>> >> 2011)
>>> >> [ 5.101990] nf_conntrack version 0.5.0 (17374463 buckets, 138995704
>>> >> max)
>>> >> [ 5.108653] nf_conntrack: falling back to vmalloc.
>>> >> [ 5.735510] random: dd urandom read with 92 bits of entropy
>>> >> available
>>> >> [ 5.927034] bond0: Setting xmit hash policy to layer3+4 (1)
>>> >> [ 5.927105] bond0: Setting MII monitoring interval to 100
>>> >> [ 5.963685] bond0: Setting LACP rate to slow (0)
>>> >> [ 6.119830] bond0: Adding slave eth0
>>> >> [ 6.119841] i40e 0000:02:00.0 eth0: already using mac address
>>> >> 3c:fd:fe:9c:56:b8
>>> >> [ 6.123689] i40e 0000:02:00.0 eth0: NIC Link is Up 10 Gbps Full
>>> >> Duplex, Flow Control: None
>>> >> [ 6.123746] bond0: Enslaving eth0 as a backup interface with an up
>>> >> link
>>> >> [ 6.126208] bond0: Adding slave eth1
>>> >> [ 6.126212] i40e 0000:02:00.1 eth1: set new mac address
>>> >> 3c:fd:fe:9c:56:b8
>>> >> [ 6.135693] i40e 0000:02:00.1 eth1: NIC Link is Up 10 Gbps Full
>>> >> Duplex, Flow Control: None
>>> >> [ 6.135756] bond0: Enslaving eth1 as a backup interface with an up
>>> >> link
>>> >> [ 7.145905] random: nonblocking pool is initialized
>>> >> [ 12.460991] Process accounting resumed
>>> >> [ 12.918920] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>>> >> [ 13.021814] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>>> >> [ 13.279044] nf_conntrack: falling back to vmalloc.
>>> >> [ 13.323161] ip_tables: (C) 2000-2006 Netfilter Core Team
>>> >>
>>> >> On 2015-08-27 16:43, Rose, Gregory V wrote:
>>> >>>> -----Original Message-----
>>> >>>> From: Christian Ruppert [mailto:***@qasl.de]
>>> >>>> Sent: Thursday, August 27, 2015 4:54 AM
>>> >>>> To: Fujinaka, Todd
>>> >>>> Cc: Rose, Gregory V; e1000-***@lists.sf.net
>>> >>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>> >>>>
>>> >>>> Well, that's it for now anyway...
>>> >>>>
>>> >>>> ...
>>> >>>> Power cycle is required to complete the update process.
>>> >>>> Tool execution completed with the following status: All operations
>>> >>>> completed successfully
>>> >>>>
>>> >>>> The card doesn't even appear in "lspci" anymore... :/ I used a Win7
>>> >>>> to
>>> >>>> flash it since a co-worker already broke one when flashing via
>>> >>>> Linux. No
>>> >>>> idea how to unbrick it.
>>> >>>
>>> >>> Christian,
>>> >>>
>>> >>> I'm very sorry to hear that. It is pretty rare for this sort of
>>> >>> thing
>>> >>> to happen but not unheard of. Please contact ***@intel.com to
>>> >>> get
>>> >>> help replacing the part.
>>> >>>
>>> >>> - Greg
>>> >>>
>>> >>>>
>>> >>>>
>>> >>>> On 2015-08-27 01:25, Fujinaka, Todd wrote:
>>> >>>> > Attachments don't work on this mailing list (though they may have
>>> >>>> > gotten to Greg). Please file a bug on e1000.sourceforge.net and
>>> attach
>>> >>>> > the files there.
>>> >>>> >
>>> >>>> > Todd Fujinaka
>>> >>>> > Software Application Engineer
>>> >>>> > Networking Division (ND)
>>> >>>> > Intel Corporation
>>> >>>> > ***@intel.com
>>> >>>> > (503) 712-4565
>>> >>>> >
>>> >>>> > -----Original Message-----
>>> >>>> > From: Christian Ruppert [mailto:***@qasl.de]
>>> >>>> > Sent: Wednesday, August 26, 2015 10:24 AM
>>> >>>> > To: Rose, Gregory V
>>> >>>> > Cc: e1000-***@lists.sf.net
>>> >>>> > Subject: Re: [E1000-devel] X710 / i40e interface resets
>>> >>>> >
>>> >>>> > On 2015-08-26 01:19, Rose, Gregory V wrote:
>>> >>>> >>> -----Original Message-----
>>> >>>> >>> From: Christian Ruppert [mailto:***@qasl.de]
>>> >>>> >>> Sent: Friday, August 21, 2015 7:06 AM
>>> >>>> >>> To: Rose, Gregory V
>>> >>>> >>> Cc: e1000-***@lists.sf.net
>>> >>>> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>> >>>> >>>
>>> >>>> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>>> >>>> >>> >> -----Original Message-----
>>> >>>> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
>>> >>>> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>>> >>>> >>> >> To: Rose, Gregory V
>>> >>>> >>> >> Cc: e1000-***@lists.sf.net
>>> >>>> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>> >>>> >>> >>
>>> >>>> >>
>>> >>>> >> [snip]
>>> >>>> >>
>>> >>>> >>> > I've been told that the Tx driver issue detected message is due
>>> to
>>> >>>> >>> > a MDD (Malicious Driver Detection) event. We need to find out
>>> what
>>> >>>> >>> > is causing that so if you could please send me your system log
>>> and
>>> >>>> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I
>>> can
>>> >>>> >>> > see what might be occurring. If not then we'll have to debug
>>> >>>> further.
>>> >>>> >>>
>>> >>>> >>> See the initial Mail for ethtool -k and so on. Also:
>>> >>>> >>> # ethtool eth0
>>> >>>> >>> Settings for eth0:
>>> >>>> >>> Supported ports: [ FIBRE ]
>>> >>>> >>> Supported link modes: 1000baseT/Full
>>> >>>> >>> 10000baseT/Full
>>> >>>> >>> Supported pause frame use: Symmetric
>>> >>>> >>> Supports auto-negotiation: No
>>> >>>> >>> Advertised link modes: 1000baseT/Full
>>> >>>> >>> 10000baseT/Full
>>> >>>> >>> Advertised pause frame use: No
>>> >>>> >>> Advertised auto-negotiation: No
>>> >>>> >>> Speed: 10000Mb/s
>>> >>>> >>> Duplex: Full
>>> >>>> >>> Port: FIBRE
>>> >>>> >>> PHYAD: 0
>>> >>>> >>> Transceiver: external
>>> >>>> >>> Auto-negotiation: off
>>> >>>> >>> Supports Wake-on: d
>>> >>>> >>> Wake-on: d
>>> >>>> >>> Current message level: 0x0000000f (15)
>>> >>>> >>> drv probe link timer
>>> >>>> >>> Link detected: yes
>>> >>>> >>> # ethtool -i eth0
>>> >>>> >>> driver: i40e
>>> >>>> >>> version: 1.2.48
>>> >>>> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>>> >>>> >>> bus-info: 0000:02:00.0
>>> >>>> >>> supports-statistics: yes
>>> >>>> >>> supports-test: yes
>>> >>>> >>> supports-eeprom-access: yes
>>> >>>> >>> supports-register-dump: yes
>>> >>>> >>> supports-priv-flags: yes
>>> >>>> >>
>>> >>>> >> I also need the output of 'dmesg' - and I need to figure out how
>>> to
>>> >>>> >> determine what specific MDD event is occurring. I'll get back to
>>> you
>>> >>>> >> with instructions on how to do that when I get the system log from
>>> >>>> >> you.
>>> >>>> >
>>> >>>> > See the attached file. It's a dmesg from boot + some minutes.
>>> >>>> > I'll upgrade the card's firmware tomorrow I guess and try out the
>>> new
>>> >>>> > drivers btw.
>>> >>>> >
>>> >>>> >>
>>> >>>> >> Thanks,
>>> >>>> >>
>>> >>>> >> - Greg
>>> >>>> >
>>> >>>> > --
>>> >>>> > Regards,
>>> >>>> > Christian Ruppert
>>> >>>>
>>> >>>> --
>>> >>>> Regards,
>>> >>>> Christian Ruppert
>>>
>>> --
>>> Regards,
>>> Christian Ruppert

--
Regards,
Christian Ruppert
Rose, Gregory V
2015-10-07 16:49:32 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Wednesday, October 07, 2015 8:00 AM
> To: Rose, Gregory V
> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>
> On 2015-10-07 16:14, Rose, Gregory V wrote:
> >> -----Original Message-----
> >> From: Christian Ruppert [mailto:***@qasl.de]
> >> Sent: Wednesday, October 07, 2015 12:59 AM
> >> To: Rose, Gregory V
> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >>
> >> Is there anything else I can do to help to get that debugged/fixed?
> >> We upgraded the connection from 1G to 10G btw (it was 1G before).
> >
> > We'll need to get a setup to reproduce the problem so we can debug it.
> > Can you provide that information? Or perhaps you've provided it
> > before and I'm just not seeing it? If that's the case can you point
> > me to it again?
> >
> > Thanks,
> >
> > - Greg
>
> Hi Greg,
>
> in this case it's a Supermicro 5017C-MTF (X9SCL/X9SCM) using a X710 10GE
> card, both ports connected to 10GE switch ports (LACP).
> WAN->Router->Swich->Host
> The host in this case acts as a loadbalancer using e.g. Varnish and
> HAProxy and doing mostly HTTP traffic (also SSL termination).
> Do you need anything else?

Maybe, but first let me ask you if you're using the VEPA mode work around for bonding?

- Greg

>
> >
> >>
> >> On 2015-09-28 16:53, Christian Ruppert wrote:
> >> > And there we go:
> >> >
> >> > [77571.409182] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [77572.245943] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> > [94412.738896] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [94413.569379] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> > [94516.443592] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [94516.718341] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> > [96850.580882] i40e 0000:02:00.0: TX driver issue detected, PF reset
> >> > issued
> >> > [96851.036998] bond0: link status up again after 0 ms for interface
> >> > eth0
> >> > [96939.474122] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [96940.217799] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> > [96945.007365] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [96945.225029] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> > [96965.362669] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [96966.255350] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> > [99844.991331] i40e 0000:02:00.0: TX driver issue detected, PF reset
> >> > issued
> >> > [99845.360288] bond0: link status up again after 0 ms for interface
> >> > eth0
> >> > [159908.054220] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [159909.165679] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> > [329531.138706] i40e 0000:02:00.1: TX driver issue detected, PF reset
> >> > issued
> >> > [329532.167421] bond0: link status up again after 0 ms for interface
> >> > eth1
> >> >
> >> > On 2015-09-25 16:19, Christian Ruppert wrote:
> >> >> Hi,
> >> >>
> >> >> the card came back and I had to flash it again but it worked
> perfectly
> >> >> fine this time :)
> >> >> So I setup a new Kernel (3.18.20) and the most recent i40e driver
> >> >> (1.3.39.1) and removed the previous workaround to disable ntuples on
> >> >> both interfaces. So basically a vanilla setup.
> >> >> That host is up for several hours no and there was no spam so far
> and
> >> >> only one reset yet:
> >> >> Sep 25 12:38:54 somehost kernel: [77571.409182] i40e 0000:02:00.1:
> TX
> >> >> driver issue detected, PF reset issued
> >> >> Sep 25 12:38:55 somehost kernel: [77572.245943] bond0: link status
> up
> >> >> again after 0 ms for interface eth1
> >> >>
> >> >> and here's the requested dmesg again:
> >> >> [ 0.000000] Initializing cgroup subsys cpuset
> >> >> [ 0.000000] Initializing cgroup subsys cpu
> >> >> [ 0.000000] Initializing cgroup subsys cpuacct
> >> >> [ 0.000000] Linux version 3.18.20 (***@somehost) (gcc version
> 4.7.2
> >> >> (Debian 4.7.2-5) ) #1 SMP Wed Aug 26 14:25:15 CEST 2015
> >> >> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
> >> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
> >> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
> >> >> [ 0.000000] e820: BIOS-provided physical RAM map:
> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-
> 0x0000000000099bff]
> >> >> usable
> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000000099c00-
> 0x000000000009ffff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-
> 0x00000000000fffff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-
> 0x00000000becc8fff]
> >> >> usable
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000becc9000-
> 0x00000000bed0bfff]
> >> >> ACPI NVS
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000bed0c000-
> 0x00000000ce491fff]
> >> >> usable
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce492000-
> 0x00000000ce534fff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce535000-
> 0x00000000ce5c6fff]
> >> >> usable
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce5c7000-
> 0x00000000ce68bfff]
> >> >> ACPI NVS
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce68c000-
> 0x00000000cf7fefff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-
> 0x00000000cf7fffff]
> >> >> usable
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-
> 0x00000000efffffff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-
> 0x00000000fec00fff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-
> 0x00000000fed03fff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-
> 0x00000000fed1ffff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-
> 0x00000000fee00fff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-
> 0x00000000ffffffff]
> >> >> reserved
> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-
> 0x000000082fffffff]
> >> >> usable
> >> >> [ 0.000000] console [earlyser0] enabled
> >> >> [ 0.000000] NX (Execute Disable) protection: active
> >> >> [ 0.000000] SMBIOS 2.7 present.
> >> >> [ 0.000000] DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2
> >> >> 02/20/2015
> >> >> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
> >> >> reserved
> >> >> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> >> >> [ 0.000000] AGP: No AGP bridge found
> >> >> [ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
> >> >> [ 0.000000] MTRR default type: uncachable
> >> >> [ 0.000000] MTRR fixed ranges enabled:
> >> >> [ 0.000000] 00000-9FFFF write-back
> >> >> [ 0.000000] A0000-BFFFF uncachable
> >> >> [ 0.000000] C0000-CBFFF write-protect
> >> >> [ 0.000000] CC000-E7FFF uncachable
> >> >> [ 0.000000] E8000-FFFFF write-protect
> >> >> [ 0.000000] MTRR variable ranges enabled:
> >> >> [ 0.000000] 0 base 000000000 mask 800000000 write-back
> >> >> [ 0.000000] 1 base 800000000 mask FE0000000 write-back
> >> >> [ 0.000000] 2 base 820000000 mask FF0000000 write-back
> >> >> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
> >> >> [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
> >> >> [ 0.000000] 5 disabled
> >> >> [ 0.000000] 6 disabled
> >> >> [ 0.000000] 7 disabled
> >> >> [ 0.000000] 8 disabled
> >> >> [ 0.000000] 9 disabled
> >> >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> >> >> 0x7010600070106
> >> >> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
> >> >> reserved
> >> >> [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
> >> >> [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf]
> >> >> mapped at [ffff8800000fd7b0]
> >> >> [ 0.000000] Base memory trampoline at [ffff880000093000] 93000
> size
> >> >> 24576
> >> >> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> >> >> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> >> >> [ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
> >> >> [ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
> >> >> [ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
> >> >> [ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
> >> >> [ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M
> >> >> [ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
> >> >> [ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
> >> >> [ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M
> >> >> [ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff]
> >> >> [ 0.000000] [mem 0x800000000-0x82bffffff] page 2M
> >> >> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbecc8fff]
> >> >> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> >> >> [ 0.000000] [mem 0x00200000-0xbebfffff] page 2M
> >> >> [ 0.000000] [mem 0xbec00000-0xbecc8fff] page 4k
> >> >> [ 0.000000] init_memory_mapping: [mem 0xbed0c000-0xce491fff]
> >> >> [ 0.000000] [mem 0xbed0c000-0xbedfffff] page 4k
> >> >> [ 0.000000] [mem 0xbee00000-0xce3fffff] page 2M
> >> >> [ 0.000000] [mem 0xce400000-0xce491fff] page 4k
> >> >> [ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
> >> >> [ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
> >> >> [ 0.000000] init_memory_mapping: [mem 0xce535000-0xce5c6fff]
> >> >> [ 0.000000] [mem 0xce535000-0xce5c6fff] page 4k
> >> >> [ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
> >> >> [ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
> >> >> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
> >> >> [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
> >> >> [ 0.000000] RAMDISK: [mem 0x360c0000-0x37057fff]
> >> >> [ 0.000000] ACPI: Early table checksum verification disabled
> >> >> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
> >> >> [ 0.000000] ACPI: XSDT 0x00000000CE64F088 00008C (v01 SUPERM
> >> >> SMCI--MB 00000001 AMI 00010013)
> >> >> [ 0.000000] ACPI: FACP 0x00000000CE65A210 00010C (v05 SUPERM
> >> >> SMCI--MB 00000001 AMI 00010013)
> >> >> [ 0.000000] ACPI: DSDT 0x00000000CE64F1A8 00B068 (v02 SUPERM
> >> >> SMCI--MB 00000000 INTL 20051117)
> >> >> [ 0.000000] ACPI: FACS 0x00000000CE68A080 000040
> >> >> [ 0.000000] ACPI: APIC 0x00000000CE65A320 000092 (v03 SUPERM
> >> >> SMCI--MB 00000001 AMI 00010013)
> >> >> [ 0.000000] ACPI: FPDT 0x00000000CE65A3B8 000044 (v01 SUPERM
> >> >> SMCI--MB 00000001 AMI 00010013)
> >> >> [ 0.000000] ACPI: MCFG 0x00000000CE65A400 00003C (v01 SUPERM
> >> >> SMCI--MB 00000001 MSFT 00000097)
> >> >> [ 0.000000] ACPI: HPET 0x00000000CE65A440 000038 (v01 SUPERM
> >> >> SMCI--MB 00000001 AMI. 00000005)
> >> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A478 000397 (v01 SataRe
> >> >> SataTabl 00001000 INTL 20091112)
> >> >> [ 0.000000] ACPI: SPMI 0x00000000CE65A810 000040 (v05 A M I
> >> >> OEMSPMI 00000000 AMI. 00000000)
> >> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A850 0009A4 (v01 PmRef
> >> >> Cpu0Ist 00003000 INTL 20051117)
> >> >> [ 0.000000] ACPI: SSDT 0x00000000CE65B1F8 000B18 (v01 PmRef
> CpuPm
> >> >> 00003000 INTL 20051117)
> >> >> [ 0.000000] ACPI: EINJ 0x00000000CE65BD10 000130 (v01 AMI AMI
> >> >> EINJ 00000000 00000000)
> >> >> [ 0.000000] ACPI: ERST 0x00000000CE65BE40 000210 (v01 AMIER AMI
> >> >> ERST 00000000 00000000)
> >> >> [ 0.000000] ACPI: HEST 0x00000000CE65C050 0000A8 (v01 AMI AMI
> >> >> HEST 00000000 00000000)
> >> >> [ 0.000000] ACPI: BERT 0x00000000CE65C0F8 000030 (v01 AMI AMI
> >> >> BERT 00000000 00000000)
> >> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
> >> >> [ 0.000000] No NUMA configuration found
> >> >> [ 0.000000] Faking a node at [mem
> >> >> 0x0000000000000000-0x000000082fffffff]
> >> >> [ 0.000000] NODE_DATA(0) allocated [mem 0x82ffdc000-0x82ffdffff]
> >> >> [ 0.000000] [ffffea0000000000-ffffea001cbfffff] PMD ->
> >> >> [ffff88080f600000-ffff88082b7fffff] on node 0
> >> >> [ 0.000000] Zone ranges:
> >> >> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> >> >> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> >> >> [ 0.000000] Normal [mem 0x100000000-0x82fffffff]
> >> >> [ 0.000000] Movable zone start for each node
> >> >> [ 0.000000] Early memory node ranges
> >> >> [ 0.000000] node 0: [mem 0x00001000-0x00098fff]
> >> >> [ 0.000000] node 0: [mem 0x00100000-0xbecc8fff]
> >> >> [ 0.000000] node 0: [mem 0xbed0c000-0xce491fff]
> >> >> [ 0.000000] node 0: [mem 0xce535000-0xce5c6fff]
> >> >> [ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
> >> >> [ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
> >> >> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x82fffffff]
> >> >> [ 0.000000] On node 0 totalpages: 8381562
> >> >> [ 0.000000] DMA zone: 56 pages used for memmap
> >> >> [ 0.000000] DMA zone: 21 pages reserved
> >> >> [ 0.000000] DMA zone: 3992 pages, LIFO batch:0
> >> >> [ 0.000000] DMA32 zone: 11498 pages used for memmap
> >> >> [ 0.000000] DMA32 zone: 840930 pages, LIFO batch:31
> >> >> [ 0.000000] Normal zone: 103040 pages used for memmap
> >> >> [ 0.000000] Normal zone: 7536640 pages, LIFO batch:31
> >> >> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> >> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> >> >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> >> >> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000]
> gsi_base[0])
> >> >> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
> >> >> GSI 0-23
> >> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
> >> >> dfl)
> >> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> >> >> level)
> >> >> [ 0.000000] ACPI: IRQ0 used by override.
> >> >> [ 0.000000] ACPI: IRQ9 used by override.
> >> >> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> >> >> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> >> >> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0x00000000-0x00000fff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0x00099000-0x00099fff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0x0009a000-0x0009ffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0x000a0000-0x000dffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0x000e0000-0x000fffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xbecc9000-0xbed0bfff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xce492000-0xce534fff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xce5c7000-0xce68bfff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xce68c000-0xcf7fefff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xcf800000-0xdfffffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xe0000000-0xefffffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xf0000000-0xfebfffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfec00000-0xfec00fff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfec01000-0xfecfffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfed00000-0xfed03fff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfed04000-0xfed1bfff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfed1c000-0xfed1ffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfed20000-0xfedfffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfee00000-0xfee00fff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xfee01000-0xfeffffff]
> >> >> [ 0.000000] PM: Registered nosave memory: [mem
> >> >> 0xff000000-0xffffffff]
> >> >> [ 0.000000] e820: [mem 0xcf800000-0xdfffffff] available for PCI
> >> >> devices
> >> >> [ 0.000000] Booting paravirtualized kernel on bare hardware
> >> >> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
> >> >> nr_cpu_ids:8 nr_node_ids:1
> >> >> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88082fc00000
> s80960
> >> >> r8192 d29632 u262144
> >> >> [ 0.000000] pcpu-alloc: s80960 r8192 d29632 u262144
> alloc=1*2097152
> >> >> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> >> >> [ 0.000000] Built 1 zonelists in Node order, mobility grouping
> on.
> >> >> Total pages: 8266947
> >> >> [ 0.000000] Policy zone: Normal
> >> >> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
> >> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
> >> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
> >> >> [ 0.000000] Intel-IOMMU: disabled
> >> >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> >> >> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
> >> >> standard form
> >> >> [ 0.000000] AGP: Checking aperture...
> >> >> [ 0.000000] AGP: No AGP bridge found
> >> >> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> >> >> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
> >> >> bailing!
> >> >> [ 0.000000] Memory: 32970712K/33526248K available (5512K kernel
> >> >> code, 966K rwdata, 1832K rodata, 1228K init, 852K bss, 555536K
> >> >> reserved)
> >> >> [ 0.000000] Hierarchical RCU implementation.
> >> >> [ 0.000000] RCU dyntick-idle grace-period acceleration is
> >> enabled.
> >> >> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to
> >> nr_cpu_ids=8.
> >> >> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
> >> >> nr_cpu_ids=8
> >> >> [ 0.000000] NR_IRQS:33024 nr_irqs:488 0
> >> >> [ 0.000000] Console: colour VGA+ 80x25
> >> >> [ 0.000000] console [tty0] enabled
> >> >> [ 0.000000] allocated 134217728 bytes of page_cgroup
> >> >> [ 0.000000] please try 'cgroup_disable=memory' option if you
> don't
> >> >> want memory cgroups
> >> >> [ 0.000000] hpet clockevent registered
> >> >> [ 0.000000] tsc: Fast TSC calibration failed
> >> >> [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
> >> >> [ 0.000000] tsc: Detected 3499.669 MHz processor
> >> >> [ 0.000025] Calibrating delay loop (skipped), value calculated
> >> >> using timer frequency.. 6999.33 BogoMIPS (lpj=13998676)
> >> >> [ 0.010617] pid_max: default: 32768 minimum: 301
> >> >> [ 0.015230] ACPI: Core revision 20140926
> >> >> [ 0.024681] ACPI: All ACPI Tables successfully acquired
> >> >> [ 0.039606] Security Framework initialized
> >> >> [ 0.043611] AppArmor: AppArmor disabled by boot time parameter
> >> >> [ 0.049421] Yama: becoming mindful.
> >> >> [ 0.054266] Dentry cache hash table entries: 4194304 (order: 13,
> >> >> 33554432 bytes)
> >> >> [ 0.067119] Inode-cache hash table entries: 2097152 (order: 12,
> >> >> 16777216 bytes)
> >> >> [ 0.076825] Mount-cache hash table entries: 65536 (order: 7,
> 524288
> >> >> bytes)
> >> >> [ 0.083636] Mountpoint-cache hash table entries: 65536 (order: 7,
> >> >> 524288 bytes)
> >> >> [ 0.091133] Initializing cgroup subsys memory
> >> >> [ 0.095401] Initializing cgroup subsys devices
> >> >> [ 0.099824] Initializing cgroup subsys freezer
> >> >> [ 0.104249] Initializing cgroup subsys net_cls
> >> >> [ 0.108676] Initializing cgroup subsys blkio
> >> >> [ 0.112929] Initializing cgroup subsys perf_event
> >> >> [ 0.117615] Initializing cgroup subsys net_prio
> >> >> [ 0.122145] CPU: Physical Processor ID: 0
> >> >> [ 0.126120] CPU: Processor Core ID: 0
> >> >> [ 0.129769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> >> >> [ 0.129769] ENERGY_PERF_BIAS: View and update with
> >> >> x86_energy_perf_policy(8)
> >> >> [ 0.143037] mce: CPU supports 9 MCE banks
> >> >> [ 0.146959] CPU0: Thermal monitoring enabled (TM1)
> >> >> [ 0.151728] process: using mwait in idle threads
> >> >> [ 0.156328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
> >> >> [ 0.156328] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB
> 0
> >> >> [ 0.168125] Freeing SMP alternatives memory: 20K
> (ffffffff81a26000
> >> >> - ffffffff81a2b000)
> >> >> [ 0.176733] ftrace: allocating 22083 entries in 87 pages
> >> >> [ 0.197324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> >> >> [ 0.242968] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 V2 @
> >> >> 3.50GHz (fam: 06, model: 3a, stepping: 09)
> >> >> [ 0.252247] TSC deadline timer enabled
> >> >> [ 0.252264] Performance Events: PEBS fmt1+, 16-deep LBR,
> IvyBridge
> >> >> events, full-width counters, Intel PMU driver.
> >> >> [ 0.262484] ... version: 3
> >> >> [ 0.266477] ... bit width: 48
> >> >> [ 0.270555] ... generic registers: 4
> >> >> [ 0.274548] ... value mask: 0000ffffffffffff
> >> >> [ 0.279843] ... max period: 0000ffffffffffff
> >> >> [ 0.285137] ... fixed-purpose events: 3
> >> >> [ 0.289130] ... event mask: 000000070000000f
> >> >> [ 0.295409] x86: Booting SMP configuration:
> >> >> [ 0.299494] .... node #0, CPUs: #1
> >> >> [ 0.316534] NMI watchdog: enabled on all CPUs, permanently
> consumes
> >> >> one hw-PMU counter.
> >> >> [ 0.324669] #2 #3 #4 #5 #6 #7
> >> >> [ 0.407240] x86: Booted up 1 node, 8 CPUs
> >> >> [ 0.411319] smpboot: Total of 8 processors activated (55994.70
> >> >> BogoMIPS)
> >> >> [ 0.424047] devtmpfs: initialized
> >> >> [ 0.430926] PM: Registering ACPI NVS region [mem
> >> >> 0xbecc9000-0xbed0bfff] (274432 bytes)
> >> >> [ 0.438777] PM: Registering ACPI NVS region [mem
> >> >> 0xce5c7000-0xce68bfff] (806912 bytes)
> >> >> [ 0.447304] pinctrl core: initialized pinctrl subsystem
> >> >> [ 0.452519] NET: Registered protocol family 16
> >> >> [ 0.468890] cpuidle: using governor ladder
> >> >> [ 0.488929] cpuidle: using governor menu
> >> >> [ 0.492803] ACPI FADT declares the system doesn't support PCIe
> >> >> ASPM, so disable it
> >> >> [ 0.500309] ACPI: bus type PCI registered
> >> >> [ 0.504301] acpiphp: ACPI Hot Plug PCI Controller Driver version:
> >> >> 0.5
> >> >> [ 0.510784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> >> >> 0xe0000000-0xefffffff] (base 0xe0000000)
> >> >> [ 0.520010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
> >> >> in E820
> >> >> [ 0.526980] PCI: Using configuration type 1 for base access
> >> >> [ 0.544821] ACPI: Added _OSI(Module Device)
> >> >> [ 0.548905] ACPI: Added _OSI(Processor Device)
> >> >> [ 0.553330] ACPI: Added _OSI(3.0 _SCP Extensions)
> >> >> [ 0.558017] ACPI: Added _OSI(Processor Aggregator Device)
> >> >> [ 0.565243] ACPI: Executed 1 blocks of module-level executable
> AML
> >> >> code
> >> >> [ 0.739624] \_SB_:_OSC invalid UUID
> >> >> [ 0.739625] _OSC request data:1 1f
> >> >> [ 0.739811] ACPI: Dynamic OEM Table Load:
> >> >> [ 0.743707] ACPI: SSDT 0xFFFF880807B5C000 00083B (v01 PmRef
> >> >> Cpu0Cst 00003001 INTL 20051117)
> >> >> [ 0.764280] ACPI: Dynamic OEM Table Load:
> >> >> [ 0.768173] ACPI: SSDT 0xFFFF880807049C00 000303 (v01 PmRef
> ApIst
> >> >> 00003000 INTL 20051117)
> >> >> [ 0.788649] ACPI: Dynamic OEM Table Load:
> >> >> [ 0.792543] ACPI: SSDT 0xFFFF880807007C00 000119 (v01 PmRef
> ApCst
> >> >> 00003000 INTL 20051117)
> >> >> [ 0.813761] ACPI: Interpreter enabled
> >> >> [ 0.817329] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> >> >> State [\_S2_] (20140926/hwxface-580)
> >> >> [ 0.826523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
> >> >> State [\_S3_] (20140926/hwxface-580)
> >> >> [ 0.835727] ACPI: (supports S0 S1 S4 S5)
> >> >> [ 0.839628] ACPI: Using IOAPIC for interrupt routing
> >> >> [ 0.844615] HEST: Table parsing has been initialized.
> >> >> [ 0.849610] PCI: Using host bridge windows from ACPI; if
> necessary,
> >> >> use "pci=nocrs" and report a bug
> >> >> [ 0.863689] ACPI: Power Resource [FN00] (off)
> >> >> [ 0.868006] ACPI: Power Resource [FN01] (off)
> >> >> [ 0.872344] ACPI: Power Resource [FN02] (off)
> >> >> [ 0.876682] ACPI: Power Resource [FN03] (off)
> >> >> [ 0.881022] ACPI: Power Resource [FN04] (off)
> >> >> [ 0.885681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-
> fe])
> >> >> [ 0.891767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig
> ASPM
> >> >> ClockPM Segments MSI]
> >> >> [ 0.900002] acpi PNP0A08:00: _OSC: platform does not support
> >> >> [PCIeHotplug PME]
> >> >> [ 0.907216] acpi PNP0A08:00: _OSC: OS now controls [AER
> >> >> PCIeCapability]
> >> >> [ 0.914173] PCI host bridge to bus 0000:00
> >> >> [ 0.918169] pci_bus 0000:00: root bus resource [bus 00-fe]
> >> >> [ 0.923636] pci_bus 0000:00: root bus resource [io 0x0000-
> 0x0cf7]
> >> >> [ 0.929798] pci_bus 0000:00: root bus resource [io 0x0d00-
> 0xffff]
> >> >> [ 0.935959] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000a0000-0x000bffff]
> >> >> [ 0.942817] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000cc000-0x000cffff]
> >> >> [ 0.949673] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000d0000-0x000d3fff]
> >> >> [ 0.956530] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000d4000-0x000d7fff]
> >> >> [ 0.963386] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000d8000-0x000dbfff]
> >> >> [ 0.970243] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000dc000-0x000dffff]
> >> >> [ 0.977101] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000e0000-0x000e3fff]
> >> >> [ 0.983957] pci_bus 0000:00: root bus resource [mem
> >> >> 0x000e4000-0x000e7fff]
> >> >> [ 0.990814] pci_bus 0000:00: root bus resource [mem
> >> >> 0xd0000000-0xfeafffff]
> >> >> [ 0.997674] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
> >> >> [ 0.997751] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
> >> >> [ 0.997831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> >> >> [ 0.997870] pci 0000:00:01.0: System wakeup disabled by ACPI
> >> >> [ 1.003450] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
> >> >> [ 1.003473] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
> >> >> [ 1.003502] pci 0000:00:01.1: System wakeup disabled by ACPI
> >> >> [ 1.009121] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
> >> >> [ 1.009138] pci 0000:00:19.0: reg 0x10: [mem 0xdfb00000-
> 0xdfb1ffff]
> >> >> [ 1.009145] pci 0000:00:19.0: reg 0x14: [mem 0xdfb25000-
> 0xdfb25fff]
> >> >> [ 1.009153] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
> >> >> [ 1.009212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> >> >> [ 1.009246] pci 0000:00:19.0: System wakeup disabled by ACPI
> >> >> [ 1.014835] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> >> >> [ 1.014854] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb24000-
> 0xdfb243ff]
> >> >> [ 1.014938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> >> >> [ 1.014983] pci 0000:00:1a.0: System wakeup disabled by ACPI
> >> >> [ 1.020571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> >> >> [ 1.020648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> >> >> [ 1.020686] pci 0000:00:1c.0: System wakeup disabled by ACPI
> >> >> [ 1.026274] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
> >> >> [ 1.026351] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> >> >> [ 1.026388] pci 0000:00:1c.4: System wakeup disabled by ACPI
> >> >> [ 1.031981] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> >> >> [ 1.032000] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb23000-
> 0xdfb233ff]
> >> >> [ 1.032084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> >> >> [ 1.032129] pci 0000:00:1d.0: System wakeup disabled by ACPI
> >> >> [ 1.037718] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> >> >> [ 1.037791] pci 0000:00:1e.0: System wakeup disabled by ACPI
> >> >> [ 1.043379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
> >> >> [ 1.043532] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
> >> >> [ 1.043549] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
> >> >> [ 1.043556] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
> >> >> [ 1.043563] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
> >> >> [ 1.043570] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
> >> >> [ 1.043577] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
> >> >> [ 1.043584] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb22000-
> 0xdfb227ff]
> >> >> [ 1.043625] pci 0000:00:1f.2: PME# supported from D3hot
> >> >> [ 1.043684] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> >> >> [ 1.043697] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb21000-
> 0xdfb210ff
> >> >> 64bit]
> >> >> [ 1.043716] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
> >> >> [ 1.043832] pci 0000:00:01.0: PCI bridge to [bus 01]
> >> >> [ 1.048735] pci 0000:02:00.0: [8086:1572] type 00 class 0x020000
> >> >> [ 1.048745] pci 0000:02:00.0: reg 0x10: [mem 0xdd800000-
> 0xddffffff
> >> >> 64bit pref]
> >> >> [ 1.048755] pci 0000:02:00.0: reg 0x1c: [mem 0xde808000-
> 0xde80ffff
> >> >> 64bit pref]
> >> >> [ 1.048764] pci 0000:02:00.0: reg 0x30: [mem 0xdfa80000-
> 0xdfafffff
> >> >> pref]
> >> >> [ 1.048800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> >> >> [ 1.048818] pci 0000:02:00.0: reg 0x184: [mem 0xde400000-
> 0xde40ffff
> >> >> 64bit pref]
> >> >> [ 1.048827] pci 0000:02:00.0: reg 0x190: [mem 0xde910000-
> 0xde913fff
> >> >> 64bit pref]
> >> >> [ 1.048862] pci 0000:02:00.1: [8086:1572] type 00 class 0x020000
> >> >> [ 1.048872] pci 0000:02:00.1: reg 0x10: [mem 0xdd000000-
> 0xdd7fffff
> >> >> 64bit pref]
> >> >> [ 1.048882] pci 0000:02:00.1: reg 0x1c: [mem 0xde800000-
> 0xde807fff
> >> >> 64bit pref]
> >> >> [ 1.048891] pci 0000:02:00.1: reg 0x30: [mem 0xdfa00000-
> 0xdfa7ffff
> >> >> pref]
> >> >> [ 1.048925] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
> >> >> [ 1.048942] pci 0000:02:00.1: reg 0x184: [mem 0xde000000-
> 0xde00ffff
> >> >> 64bit pref]
> >> >> [ 1.048951] pci 0000:02:00.1: reg 0x190: [mem 0xde810000-
> 0xde813fff
> >> >> 64bit pref]
> >> >> [ 1.056725] pci 0000:00:01.1: PCI bridge to [bus 02-03]
> >> >> [ 1.061856] pci 0000:00:01.1: bridge window [mem
> >> >> 0xdfa00000-0xdfafffff]
> >> >> [ 1.061858] pci 0000:00:01.1: bridge window [mem
> >> >> 0xdd000000-0xdeafffff 64bit pref]
> >> >> [ 1.061915] pci 0000:00:1c.0: PCI bridge to [bus 04]
> >> >> [ 1.066903] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
> >> >> [ 1.066942] pci 0000:05:00.0: reg 0x10: [mem 0xdf900000-
> 0xdf91ffff]
> >> >> [ 1.066987] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
> >> >> [ 1.067010] pci 0000:05:00.0: reg 0x1c: [mem 0xdf920000-
> 0xdf923fff]
> >> >> [ 1.067239] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
> >> >> [ 1.067289] pci 0000:05:00.0: System wakeup disabled by ACPI
> >> >> [ 1.080881] pci 0000:00:1c.4: PCI bridge to [bus 05]
> >> >> [ 1.085759] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
> >> >> [ 1.085762] pci 0000:00:1c.4: bridge window [mem
> >> >> 0xdf900000-0xdf9fffff]
> >> >> [ 1.085807] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
> >> >> [ 1.085822] pci 0000:06:03.0: reg 0x10: [mem 0xdc000000-
> 0xdcffffff
> >> >> pref]
> >> >> [ 1.085831] pci 0000:06:03.0: reg 0x14: [mem 0xdf800000-
> 0xdf803fff]
> >> >> [ 1.085839] pci 0000:06:03.0: reg 0x18: [mem 0xdf000000-
> 0xdf7fffff]
> >> >> [ 1.085948] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive
> >> >> decode)
> >> >> [ 1.092645] pci 0000:00:1e.0: bridge window [mem
> >> >> 0xdf000000-0xdf8fffff]
> >> >> [ 1.092650] pci 0000:00:1e.0: bridge window [mem
> >> >> 0xdc000000-0xdcffffff 64bit pref]
> >> >> [ 1.092651] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
> >> >> (subtractive decode)
> >> >> [ 1.092652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
> >> >> (subtractive decode)
> >> >> [ 1.092653] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000a0000-0x000bffff] (subtractive decode)
> >> >> [ 1.092655] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000cc000-0x000cffff] (subtractive decode)
> >> >> [ 1.092656] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000d0000-0x000d3fff] (subtractive decode)
> >> >> [ 1.092657] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000d4000-0x000d7fff] (subtractive decode)
> >> >> [ 1.092658] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000d8000-0x000dbfff] (subtractive decode)
> >> >> [ 1.092659] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000dc000-0x000dffff] (subtractive decode)
> >> >> [ 1.092660] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000e0000-0x000e3fff] (subtractive decode)
> >> >> [ 1.092661] pci 0000:00:1e.0: bridge window [mem
> >> >> 0x000e4000-0x000e7fff] (subtractive decode)
> >> >> [ 1.092662] pci 0000:00:1e.0: bridge window [mem
> >> >> 0xd0000000-0xfeafffff] (subtractive decode)
> >> >> [ 1.092690] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
> >> >> unsupported)
> >> >> [ 1.100314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11
> 12
> >> >> 14 15)
> >> >> [ 1.107107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11
> 12
> >> >> 14 15)
> >> >> [ 1.113962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11
> 12
> >> >> 14 15)
> >> >> [ 1.120818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11
> 12
> >> >> 14 15)
> >> >> [ 1.127675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11
> 12
> >> >> 14 15)
> >> >> [ 1.134531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11
> 12
> >> >> 14 15) *0, disabled.
> >> >> [ 1.142515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11
> 12
> >> >> 14 15) *0, disabled.
> >> >> [ 1.150505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11
> 12
> >> >> 14 15)
> >> >> [ 1.157484] ACPI: Enabled 4 GPEs in block 00 to 3F
> >> >> [ 1.162221] vgaarb: setting as boot device: PCI:0000:06:03.0
> >> >> [ 1.167794] vgaarb: device added:
> >> >> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
> >> >> [ 1.175867] vgaarb: loaded
> >> >> [ 1.178556] vgaarb: bridge control possible 0000:06:03.0
> >> >> [ 1.183909] PCI: Using ACPI for IRQ routing
> >> >> [ 1.193792] PCI: pci_cache_line_size set to 64 bytes
> >> >> [ 1.193833] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
> >> >> [ 1.193834] e820: reserve RAM buffer [mem 0xbecc9000-0xbfffffff]
> >> >> [ 1.193835] e820: reserve RAM buffer [mem 0xce492000-0xcfffffff]
> >> >> [ 1.193836] e820: reserve RAM buffer [mem 0xce5c7000-0xcfffffff]
> >> >> [ 1.193837] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
> >> >> [ 1.193935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0,
> 0
> >> >> [ 1.199994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> >> >> [ 1.207831] Switched to clocksource hpet
> >> >> [ 1.215086] pnp: PnP ACPI init
> >> >> [ 1.218096] system 00:00: [mem 0xfed40000-0xfed44fff] has been
> >> >> reserved
> >> >> [ 1.224641] system 00:00: Plug and Play ACPI device, IDs PNP0c01
> >> >> (active)
> >> >> [ 1.224688] system 00:01: [io 0x0680-0x069f] has been reserved
> >> >> [ 1.230542] system 00:01: [io 0x1000-0x100f] has been reserved
> >> >> [ 1.236442] system 00:01: [io 0xffff] has been reserved
> >> >> [ 1.241736] system 00:01: [io 0xffff] has been reserved
> >> >> [ 1.247031] system 00:01: [io 0x0400-0x0453] could not be
> reserved
> >> >> [ 1.253282] system 00:01: [io 0x0458-0x047f] has been reserved
> >> >> [ 1.259182] system 00:01: [io 0x0500-0x057f] has been reserved
> >> >> [ 1.265084] system 00:01: [io 0x164e-0x164f] has been reserved
> >> >> [ 1.270987] system 00:01: Plug and Play ACPI device, IDs PNP0c02
> >> >> (active)
> >> >> [ 1.271008] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
> >> >> (active)
> >> >> [ 1.271039] system 00:03: [io 0x0454-0x0457] has been reserved
> >> >> [ 1.276891] system 00:03: Plug and Play ACPI device, IDs INT3f0d
> >> >> PNP0c02 (active)
> >> >> [ 1.276924] system 00:04: [io 0x04d0-0x04d1] has been reserved
> >> >> [ 1.282792] system 00:04: Plug and Play ACPI device, IDs PNP0c02
> >> >> (active)
> >> >> [ 1.282868] system 00:05: [io 0x0a00-0x0a1f] has been reserved
> >> >> [ 1.288693] system 00:05: [io 0x0a30-0x0a3f] has been reserved
> >> >> [ 1.294594] system 00:05: Plug and Play ACPI device, IDs PNP0c02
> >> >> (active)
> >> >> [ 1.294751] pnp 00:06: [dma 0 disabled]
> >> >> [ 1.294780] pnp 00:06: Plug and Play ACPI device, IDs PNP0501
> >> >> (active)
> >> >> [ 1.294921] pnp 00:07: [dma 0 disabled]
> >> >> [ 1.294947] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
> >> >> (active)
> >> >> [ 1.295019] system 00:08: [io 0x0b00-0x0b7f] has been reserved
> >> >> [ 1.300845] system 00:08: Plug and Play ACPI device, IDs PNP0c02
> >> >> (active)
> >> >> [ 1.300958] pnp 00:09: [dma 0 disabled]
> >> >> [ 1.300985] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
> >> >> (active)
> >> >> [ 1.301064] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001
> >> >> (active)
> >> >> [ 1.301198] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been
> >> >> reserved
> >> >> [ 1.307720] system 00:0b: [mem 0xfed10000-0xfed17fff] has been
> >> >> reserved
> >> >> [ 1.314314] system 00:0b: [mem 0xfed18000-0xfed18fff] has been
> >> >> reserved
> >> >> [ 1.320909] system 00:0b: [mem 0xfed19000-0xfed19fff] has been
> >> >> reserved
> >> >> [ 1.327506] system 00:0b: [mem 0xe0000000-0xefffffff] has been
> >> >> reserved
> >> >> [ 1.334102] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been
> >> >> reserved
> >> >> [ 1.340701] system 00:0b: [mem 0xfed90000-0xfed93fff] has been
> >> >> reserved
> >> >> [ 1.347295] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been
> >> >> reserved
> >> >> [ 1.353892] system 00:0b: [mem 0xff000000-0xffffffff] has been
> >> >> reserved
> >> >> [ 1.360488] system 00:0b: [mem 0xfee00000-0xfeefffff] could not
> be
> >> >> reserved
> >> >> [ 1.367430] system 00:0b: [mem 0xd0000000-0xd0000fff] has been
> >> >> reserved
> >> >> [ 1.374027] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
> >> >> (active)
> >> >> [ 1.374113] pnp: PnP ACPI: found 12 devices
> >> >> [ 1.384167] pci 0000:00:01.0: PCI bridge to [bus 01]
> >> >> [ 1.389053] pci 0000:00:01.1: PCI bridge to [bus 02-03]
> >> >> [ 1.394250] pci 0000:00:01.1: bridge window [mem
> >> >> 0xdfa00000-0xdfafffff]
> >> >> [ 1.401020] pci 0000:00:01.1: bridge window [mem
> >> >> 0xdd000000-0xdeafffff 64bit pref]
> >> >> [ 1.408745] pci 0000:00:1c.0: PCI bridge to [bus 04]
> >> >> [ 1.413701] pci 0000:00:1c.4: PCI bridge to [bus 05]
> >> >> [ 1.418641] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
> >> >> [ 1.424718] pci 0000:00:1c.4: bridge window [mem
> >> >> 0xdf900000-0xdf9fffff]
> >> >> [ 1.431489] pci 0000:00:1e.0: PCI bridge to [bus 06]
> >> >> [ 1.436435] pci 0000:00:1e.0: bridge window [mem
> >> >> 0xdf000000-0xdf8fffff]
> >> >> [ 1.443203] pci 0000:00:1e.0: bridge window [mem
> >> >> 0xdc000000-0xdcffffff 64bit pref]
> >> >> [ 1.450929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> >> >> [ 1.450931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> >> >> [ 1.450932] pci_bus 0000:00: resource 6 [mem 0x000a0000-
> 0x000bffff]
> >> >> [ 1.450933] pci_bus 0000:00: resource 7 [mem 0x000cc000-
> 0x000cffff]
> >> >> [ 1.450934] pci_bus 0000:00: resource 8 [mem 0x000d0000-
> 0x000d3fff]
> >> >> [ 1.450935] pci_bus 0000:00: resource 9 [mem 0x000d4000-
> 0x000d7fff]
> >> >> [ 1.450936] pci_bus 0000:00: resource 10 [mem
> >> >> 0x000d8000-0x000dbfff]
> >> >> [ 1.450937] pci_bus 0000:00: resource 11 [mem
> >> >> 0x000dc000-0x000dffff]
> >> >> [ 1.450938] pci_bus 0000:00: resource 12 [mem
> >> >> 0x000e0000-0x000e3fff]
> >> >> [ 1.450939] pci_bus 0000:00: resource 13 [mem
> >> >> 0x000e4000-0x000e7fff]
> >> >> [ 1.450940] pci_bus 0000:00: resource 14 [mem
> >> >> 0xd0000000-0xfeafffff]
> >> >> [ 1.450941] pci_bus 0000:02: resource 1 [mem 0xdfa00000-
> 0xdfafffff]
> >> >> [ 1.450942] pci_bus 0000:02: resource 2 [mem 0xdd000000-
> 0xdeafffff
> >> >> 64bit pref]
> >> >> [ 1.450943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
> >> >> [ 1.450944] pci_bus 0000:05: resource 1 [mem 0xdf900000-
> 0xdf9fffff]
> >> >> [ 1.450946] pci_bus 0000:06: resource 1 [mem 0xdf000000-
> 0xdf8fffff]
> >> >> [ 1.450947] pci_bus 0000:06: resource 2 [mem 0xdc000000-
> 0xdcffffff
> >> >> 64bit pref]
> >> >> [ 1.450948] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
> >> >> [ 1.450949] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
> >> >> [ 1.450950] pci_bus 0000:06: resource 6 [mem 0x000a0000-
> 0x000bffff]
> >> >> [ 1.450951] pci_bus 0000:06: resource 7 [mem 0x000cc000-
> 0x000cffff]
> >> >> [ 1.450952] pci_bus 0000:06: resource 8 [mem 0x000d0000-
> 0x000d3fff]
> >> >> [ 1.450953] pci_bus 0000:06: resource 9 [mem 0x000d4000-
> 0x000d7fff]
> >> >> [ 1.450954] pci_bus 0000:06: resource 10 [mem
> >> >> 0x000d8000-0x000dbfff]
> >> >> [ 1.450955] pci_bus 0000:06: resource 11 [mem
> >> >> 0x000dc000-0x000dffff]
> >> >> [ 1.450956] pci_bus 0000:06: resource 12 [mem
> >> >> 0x000e0000-0x000e3fff]
> >> >> [ 1.450957] pci_bus 0000:06: resource 13 [mem
> >> >> 0x000e4000-0x000e7fff]
> >> >> [ 1.450958] pci_bus 0000:06: resource 14 [mem
> >> >> 0xd0000000-0xfeafffff]
> >> >> [ 1.451014] NET: Registered protocol family 2
> >> >> [ 1.455462] TCP established hash table entries: 262144 (order: 9,
> >> >> 2097152 bytes)
> >> >> [ 1.463005] TCP bind hash table entries: 65536 (order: 8, 1048576
> >> >> bytes)
> >> >> [ 1.469713] TCP: Hash tables configured (established 262144 bind
> >> >> 65536)
> >> >> [ 1.476246] TCP: reno registered
> >> >> [ 1.479464] UDP hash table entries: 16384 (order: 7, 524288
> bytes)
> >> >> [ 1.485680] UDP-Lite hash table entries: 16384 (order: 7, 524288
> >> >> bytes)
> >> >> [ 1.492306] NET: Registered protocol family 1
> >> >> [ 1.496818] PCI: CLS mismatch (64 != 32), using 64 bytes
> >> >> [ 1.496823] pci 0000:06:03.0: Video device with shadowed ROM
> >> >> [ 1.496853] Unpacking initramfs...
> >> >> [ 1.690454] Freeing initrd memory: 15968K (ffff8800360c0000 -
> >> >> ffff880037058000)
> >> >> [ 1.697700] PCI-DMA: Using software bounce buffering for IO
> >> >> (SWIOTLB)
> >> >> [ 1.704118] software IO TLB [mem 0xca492000-0xce492000] (64MB)
> >> >> mapped at [ffff8800ca492000-ffff8800ce491fff]
> >> >> [ 1.714164] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
> >> >> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
> >> >> [ 1.724674] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.730426] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.736250] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.750730] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.756546] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.762360] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.768179] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.773991] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
> >> >> [ 1.779835] microcode: Microcode Update Driver: v2.00
> >> >> <***@aivazian.fsnet.co.uk>, Peter Oruba
> >> >> [ 1.788826] futex hash table entries: 2048 (order: 5, 131072
> bytes)
> >> >> [ 1.795033] audit: initializing netlink subsys (disabled)
> >> >> [ 1.800388] audit: type=2000 audit(1443100076.548:1): initialized
> >> >> [ 1.806664] HugeTLB registered 2 MB page size, pre-allocated 0
> >> >> pages
> >> >> [ 1.812933] zpool: loaded
> >> >> [ 1.815517] zbud: loaded
> >> >> [ 1.818158] VFS: Disk quotas dquot_6.5.2
> >> >> [ 1.821997] Dquot-cache hash table entries: 512 (order 0, 4096
> >> >> bytes)
> >> >> [ 1.828445] msgmni has been set to 32768
> >> >> [ 1.832595] alg: No test for stdrng (krng)
> >> >> [ 1.836625] Block layer SCSI generic (bsg) driver version 0.4
> >> >> loaded (major 252)
> >> >> [ 1.844014] io scheduler noop registered
> >> >> [ 1.847878] io scheduler deadline registered
> >> >> [ 1.852131] io scheduler cfq registered (default)
> >> >> [ 1.856959] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
> >> >> [ 1.857070] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
> >> >> [ 1.857283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> >> >> [ 1.862775] pciehp: PCI Express Hot Plug Controller Driver
> version:
> >> >> 0.4
> >> >> [ 1.869391] intel_idle: MWAIT substates: 0x1120
> >> >> [ 1.869392] intel_idle: v0.4 model 0x3A
> >> >> [ 1.869393] intel_idle: lapic_timer_reliable_states 0xffffffff
> >> >> [ 1.869628] ERST: Error Record Serialization Table (ERST) support
> >> >> is initialized.
> >> >> [ 1.877034] pstore: Registered erst as persistent store backend
> >> >> [ 1.882975] GHES: APEI firmware first mode is enabled by WHEA
> _OSC.
> >> >> [ 1.889229] Serial: 8250/16550 driver, 4 ports, IRQ sharing
> enabled
> >> >> [ 1.915898] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
> 115200)
> >> >> is a 16550A
> >> >> [ 1.943574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
> 115200)
> >> >> is a 16550A
> >> >> [ 1.971232] 00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud =
> >> >> 115200) is a 16550A
> >> >> [ 1.978753] Linux agpgart interface v0.103
> >> >> [ 1.982831] i8042: PNP: No PS/2 controller found. Probing ports
> >> >> directly.
> >> >> [ 1.992701] serio: i8042 KBD port at 0x60,0x64 irq 1
> >> >> [ 1.997575] serio: i8042 AUX port at 0x60,0x64 irq 12
> >> >> [ 2.002720] mousedev: PS/2 mouse device common for all mice
> >> >> [ 2.008232] rtc_cmos 00:02: RTC can wake from S4
> >> >> [ 2.012908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> >> >> [ 2.018943] rtc_cmos 00:02: alarms up to one month, y3k, 242
> bytes
> >> >> nvram, hpet irqs
> >> >> [ 2.026564] ledtrig-cpu: registered to indicate activity on CPUs
> >> >> [ 2.032717] AMD IOMMUv2 driver by Joerg Roedel
> >> >> <***@amd.com>
> >> >> [ 2.039059] AMD IOMMUv2 functionality not available on this
> system
> >> >> [ 2.045283] TCP: cubic registered
> >> >> [ 2.048521] IPv6: Loaded, but administratively disabled, reboot
> >> >> required to enable
> >> >> [ 2.056071] mip6: Mobile IPv6
> >> >> [ 2.059020] mip6: mip6_init: can't add xfrm type(destopt)
> >> >> [ 2.064404] NET: Registered protocol family 17
> >> >> [ 2.068836] mpls_gso: MPLS GSO support
> >> >> [ 2.072972] registered taskstats version 1
> >> >> [ 2.077499] rtc_cmos 00:02: setting system clock to 2015-09-24
> >> >> 13:07:57 UTC (1443100077)
> >> >> [ 2.085560] PM: Hibernation image not present or could not be
> >> >> loaded.
> >> >> [ 2.086094] Freeing unused kernel memory: 1228K (ffffffff818f3000
> -
> >> >> ffffffff81a26000)
> >> >> [ 2.093851] Write protecting the kernel read-only data: 8192k
> >> >> [ 2.100532] Freeing unused kernel memory: 620K (ffff880001565000
> -
> >> >> ffff880001600000)
> >> >> [ 2.108556] Freeing unused kernel memory: 216K (ffff8800017ca000
> -
> >> >> ffff880001800000)
> >> >> [ 2.123393] udevd[94]: starting version 175
> >> >> [ 2.131920] pps_core: LinuxPPS API ver. 1 registered
> >> >> [ 2.136823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> >> >> Rodolfo Giometti <***@linux.it>
> >> >> [ 2.147106] PTP clock support registered
> >> >> [ 2.151071] ACPI: bus type USB registered
> >> >> [ 2.155038] usbcore: registered new interface driver usbfs
> >> >> [ 2.160469] usbcore: registered new interface driver hub
> >> >> [ 2.165787] usbcore: registered new device driver usb
> >> >> [ 2.171019] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> >> >> [ 2.176789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
> >> >> [ 2.182928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> >> >> Driver
> >> >> [ 2.189595] ehci-pci: EHCI PCI platform driver
> >> >> [ 2.194192] i40e: Intel(R) Ethernet Connection XL710 Network
> Driver
> >> >> - version 1.3.39.1
> >> >> [ 2.197599] e1000e 0000:00:19.0: Interrupt Throttling Rate
> >> >> (ints/sec) set to dynamic conservative mode
> >> >> [ 2.197641] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
> >> >> [ 2.198073] thermal LNXTHERM:00: registered as thermal_zone0
> >> >> [ 2.198073] ACPI: Thermal Zone [TZ00] (28 C)
> >> >> [ 2.198216] thermal LNXTHERM:01: registered as thermal_zone1
> >> >> [ 2.198216] ACPI: Thermal Zone [TZ01] (30 C)
> >> >> [ 2.231104] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
> >> >> [ 2.249391] i40e 0000:02:00.0: fw 4.40.35115 api 1.4 nvm 4.53
> >> >> 0x80001dc0 1.123.0
> >> >> [ 2.256998] SCSI subsystem initialized
> >> >> [ 2.261957] libata version 3.00 loaded.
> >> >> [ 2.453377] e1000e 0000:00:19.0 eth0: registered PHC clock
> >> >> [ 2.458796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width
> >> >> x1) 00:25:90:a8:02:51
> >> >> [ 2.466693] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
> >> >> Connection
> >> >> [ 2.473600] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
> >> >> FFFFFF-0FF
> >> >> [ 2.480564] ehci-pci 0000:00:1a.0: EHCI Host Controller
> >> >> [ 2.480631] e1000e 0000:05:00.0: Interrupt Throttling Rate
> >> >> (ints/sec) set to dynamic conservative mode
> >> >> [ 2.480663] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
> >> >> [ 2.480665] e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
> >> >> [ 2.480667] e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
> >> >> [ 2.495076] ehci-pci 0000:00:1a.0: new USB bus registered,
> assigned
> >> >> bus number 1
> >> >> [ 2.495874] i40e 0000:02:00.0: MAC address: 3c:fd:fe:9c:56:b8
> >> >> [ 2.499857] i40e 0000:02:00.0: SAN MAC: 3c:fd:fe:9c:56:ba
> >> >> [ 2.513542] ehci-pci 0000:00:1a.0: debug port 2
> >> >> [ 2.514095] i40e 0000:02:00.0: irq 30 for MSI/MSI-X
> >> >> [ 2.514098] i40e 0000:02:00.0: irq 31 for MSI/MSI-X
> >> >> [ 2.514099] i40e 0000:02:00.0: irq 32 for MSI/MSI-X
> >> >> [ 2.514101] i40e 0000:02:00.0: irq 33 for MSI/MSI-X
> >> >> [ 2.514103] i40e 0000:02:00.0: irq 34 for MSI/MSI-X
> >> >> [ 2.514105] i40e 0000:02:00.0: irq 35 for MSI/MSI-X
> >> >> [ 2.514107] i40e 0000:02:00.0: irq 36 for MSI/MSI-X
> >> >> [ 2.514108] i40e 0000:02:00.0: irq 37 for MSI/MSI-X
> >> >> [ 2.514110] i40e 0000:02:00.0: irq 38 for MSI/MSI-X
> >> >> [ 2.514111] i40e 0000:02:00.0: irq 39 for MSI/MSI-X
> >> >> [ 2.514113] i40e 0000:02:00.0: irq 40 for MSI/MSI-X
> >> >> [ 2.514114] i40e 0000:02:00.0: irq 41 for MSI/MSI-X
> >> >> [ 2.514116] i40e 0000:02:00.0: irq 42 for MSI/MSI-X
> >> >> [ 2.514118] i40e 0000:02:00.0: irq 43 for MSI/MSI-X
> >> >> [ 2.514119] i40e 0000:02:00.0: irq 44 for MSI/MSI-X
> >> >> [ 2.514121] i40e 0000:02:00.0: irq 45 for MSI/MSI-X
> >> >> [ 2.514122] i40e 0000:02:00.0: irq 46 for MSI/MSI-X
> >> >> [ 2.514124] i40e 0000:02:00.0: irq 47 for MSI/MSI-X
> >> >> [ 2.521951] ehci-pci 0000:00:1a.0: cache line size of 64 is not
> >> >> supported
> >> >> [ 2.521964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb24000
> >> >> [ 2.537912] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> >> >> [ 2.543607] usb usb1: New USB device found, idVendor=1d6b,
> >> >> idProduct=0002
> >> >> [ 2.550333] usb usb1: New USB device strings: Mfr=3, Product=2,
> >> >> SerialNumber=1
> >> >> [ 2.557541] usb usb1: Product: EHCI Host Controller
> >> >> [ 2.562399] usb usb1: Manufacturer: Linux 3.18.20 ehci_hcd
> >> >> [ 2.568471] usb usb1: SerialNumber: 0000:00:1a.0
> >> >> [ 2.573164] hub 1-0:1.0: USB hub found
> >> >> [ 2.576818] hub 1-0:1.0: 2 ports detected
> >> >> [ 2.580962] ehci-pci 0000:00:1d.0: EHCI Host Controller
> >> >> [ 2.586095] ehci-pci 0000:00:1d.0: new USB bus registered,
> assigned
> >> >> bus number 2
> >> >> [ 2.593480] ehci-pci 0000:00:1d.0: debug port 2
> >> >> [ 2.599535] e1000e 0000:05:00.0 eth2: registered PHC clock
> >> >> [ 2.601911] ehci-pci 0000:00:1d.0: cache line size of 64 is not
> >> >> supported
> >> >> [ 2.601922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb23000
> >> >> [ 2.610602] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width
> >> >> x1) 00:25:90:a8:02:50
> >> >> [ 2.613936] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> >> >> [ 2.613963] usb usb2: New USB device found, idVendor=1d6b,
> >> >> idProduct=0002
> >> >> [ 2.613964] usb usb2: New USB device strings: Mfr=3, Product=2,
> >> >> SerialNumber=1
> >> >> [ 2.613965] usb usb2: Product: EHCI Host Controller
> >> >> [ 2.613965] usb usb2: Manufacturer: Linux 3.18.20 ehci_hcd
> >> >> [ 2.613966] usb usb2: SerialNumber: 0000:00:1d.0
> >> >> [ 2.614075] hub 2-0:1.0: USB hub found
> >> >> [ 2.614078] hub 2-0:1.0: 2 ports detected
> >> >> [ 2.614192] ahci 0000:00:1f.2: version 3.0
> >> >> [ 2.614340] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
> >> >> [ 2.614485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3
> >> >> Gbps 0x3f impl SATA mode
> >> >> [ 2.614486] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio
> slum
> >> >> part ems apst
> >> >> [ 2.626630] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width
> x8
> >> >> [ 2.654604] scsi host0: ahci
> >> >> [ 2.654992] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs:
> 66
> >> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
> >> >> [ 2.657763] scsi host1: ahci
> >> >> [ 2.658083] scsi host2: ahci
> >> >> [ 2.658320] scsi host3: ahci
> >> >> [ 2.658546] scsi host4: ahci
> >> >> [ 2.658747] scsi host5: ahci
> >> >> [ 2.658785] ata1: SATA max UDMA/133 abar ***@0xdfb22000 port
> >> >> 0xdfb22100 irq 48
> >> >> [ 2.658788] ata2: SATA max UDMA/133 abar ***@0xdfb22000 port
> >> >> 0xdfb22180 irq 48
> >> >> [ 2.658790] ata3: SATA max UDMA/133 abar ***@0xdfb22000 port
> >> >> 0xdfb22200 irq 48
> >> >> [ 2.658792] ata4: SATA max UDMA/133 abar ***@0xdfb22000 port
> >> >> 0xdfb22280 irq 48
> >> >> [ 2.658795] ata5: SATA max UDMA/133 abar ***@0xdfb22000 port
> >> >> 0xdfb22300 irq 48
> >> >> [ 2.658798] ata6: SATA max UDMA/133 abar ***@0xdfb22000 port
> >> >> 0xdfb22380 irq 48
> >> >> [ 2.670025] i40e 0000:02:00.1: fw 4.40.35115 api 1.4 nvm 4.53
> >> >> 0x80001dc0 1.123.0
> >> >> [ 2.714122] tsc: Refined TSC clocksource calibration: 3500.024
> MHz
> >> >> [ 2.769612] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network
> >> >> Connection
> >> >> [ 2.776551] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No:
> >> >> FFFFFF-0FF
> >> >> [ 2.890322] usb 1-1: new high-speed USB device number 2 using
> >> >> ehci-pci
> >> >> [ 2.916415] i40e 0000:02:00.1: MAC address: 3c:fd:fe:9c:56:b9
> >> >> [ 2.926260] i40e 0000:02:00.1: SAN MAC: 3c:fd:fe:9c:56:bb
> >> >> [ 2.930381] usb 2-1: new high-speed USB device number 2 using
> >> >> ehci-pci
> >> >> [ 2.952496] i40e 0000:02:00.1: irq 49 for MSI/MSI-X
> >> >> [ 2.952503] i40e 0000:02:00.1: irq 50 for MSI/MSI-X
> >> >> [ 2.952508] i40e 0000:02:00.1: irq 51 for MSI/MSI-X
> >> >> [ 2.952512] i40e 0000:02:00.1: irq 52 for MSI/MSI-X
> >> >> [ 2.952516] i40e 0000:02:00.1: irq 53 for MSI/MSI-X
> >> >> [ 2.952520] i40e 0000:02:00.1: irq 54 for MSI/MSI-X
> >> >> [ 2.952525] i40e 0000:02:00.1: irq 55 for MSI/MSI-X
> >> >> [ 2.952537] i40e 0000:02:00.1: irq 56 for MSI/MSI-X
> >> >> [ 2.952539] i40e 0000:02:00.1: irq 57 for MSI/MSI-X
> >> >> [ 2.952541] i40e 0000:02:00.1: irq 58 for MSI/MSI-X
> >> >> [ 2.952543] i40e 0000:02:00.1: irq 59 for MSI/MSI-X
> >> >> [ 2.952545] i40e 0000:02:00.1: irq 60 for MSI/MSI-X
> >> >> [ 2.952547] i40e 0000:02:00.1: irq 61 for MSI/MSI-X
> >> >> [ 2.952549] i40e 0000:02:00.1: irq 62 for MSI/MSI-X
> >> >> [ 2.952550] i40e 0000:02:00.1: irq 63 for MSI/MSI-X
> >> >> [ 2.952554] i40e 0000:02:00.1: irq 64 for MSI/MSI-X
> >> >> [ 2.952556] i40e 0000:02:00.1: irq 65 for MSI/MSI-X
> >> >> [ 2.952558] i40e 0000:02:00.1: irq 66 for MSI/MSI-X
> >> >> [ 2.978497] ata5: SATA link down (SStatus 0 SControl 300)
> >> >> [ 2.983838] ata6: SATA link down (SStatus 0 SControl 300)
> >> >> [ 2.989225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl
> 300)
> >> >> [ 2.995381] ata4: SATA link down (SStatus 0 SControl 300)
> >> >> [ 3.000756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl
> 300)
> >> >> [ 3.007184] ata2: SATA link down (SStatus 0 SControl 300)
> >> >> [ 3.012510] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> >> >> succeeded
> >> >> [ 3.012514] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
> FREEZE
> >> >> LOCK) filtered out
> >> >> [ 3.020391] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> >> >> CONFIGURATION OVERLAY) filtered out
> >> >> [ 3.026954] usb 1-1: New USB device found, idVendor=8087,
> >> >> idProduct=0024
> >> >> [ 3.026955] usb 1-1: New USB device strings: Mfr=0, Product=0,
> >> >> SerialNumber=0
> >> >> [ 3.027240] hub 1-1:1.0: USB hub found
> >> >> [ 3.027332] hub 1-1:1.0: 6 ports detected
> >> >> [ 3.050510] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> >> >> succeeded
> >> >> [ 3.050512] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
> FREEZE
> >> >> LOCK) filtered out
> >> >> [ 3.061847] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width
> x8
> >> >> [ 3.067012] usb 2-1: New USB device found, idVendor=8087,
> >> >> idProduct=0024
> >> >> [ 3.067013] usb 2-1: New USB device strings: Mfr=0, Product=0,
> >> >> SerialNumber=0
> >> >> [ 3.067296] hub 2-1:1.0: USB hub found
> >> >> [ 3.067384] hub 2-1:1.0: 6 ports detected
> >> >> [ 3.090237] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs:
> 66
> >> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
> >> >> [ 3.103551] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> >> >> CONFIGURATION OVERLAY) filtered out
> >> >> [ 3.112266] ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10250, max
> >> >> UDMA/133
> >> >> [ 3.118799] ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth
> >> >> 31/32)
> >> >> [ 3.125486] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, 1.00, max
> >> >> UDMA/133
> >> >> [ 3.132254] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> >> >> succeeded
> >> >> [ 3.132259] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
> FREEZE
> >> >> LOCK) filtered out
> >> >> [ 3.140106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> >> >> CONFIGURATION OVERLAY) filtered out
> >> >> [ 3.148916] ata1.00: configured for UDMA/133
> >> >> [ 3.153298] scsi 0:0:0:0: Direct-Access ATA INTEL
> >> >> SSDSC2BA20 0250 PQ: 0 ANSI: 5
> >> >> [ 3.154140] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> >> >> succeeded
> >> >> [ 3.154142] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
> FREEZE
> >> >> LOCK) filtered out
> >> >> [ 3.154143] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
> >> >> CONFIGURATION OVERLAY) filtered out
> >> >> [ 3.156130] ata3.00: configured for UDMA/133
> >> >> [ 3.185352] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N
> >> >> 1.00 PQ: 0 ANSI: 5
> >> >> [ 3.298953] usb 1-1.2: new full-speed USB device number 3 using
> >> >> ehci-pci
> >> >> [ 3.323219] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks:
> >> >> (200 GB/186 GiB)
> >> >> [ 3.330670] sd 0:0:0:0: [sda] Write Protect is off
> >> >> [ 3.335418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> >> >> [ 3.335427] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> >> >> enabled, doesn't support DPO or FUA
> >> >> [ 3.338917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
> >> >> dvd-ram cd/rw xa/form2 cdda tray
> >> >> [ 3.338918] cdrom: Uniform CD-ROM driver Revision: 3.20
> >> >> [ 3.339081] sr 2:0:0:0: Attached scsi CD-ROM sr0
> >> >> [ 3.358408] sd 0:0:0:0: Attached scsi generic sg0 type 0
> >> >> [ 3.358668] sda: sda1 sda2
> >> >> [ 3.358886] sd 0:0:0:0: [sda] Attached SCSI disk
> >> >> [ 3.371134] sr 2:0:0:0: Attached scsi generic sg1 type 5
> >> >> [ 3.396737] usb 1-1.2: New USB device found, idVendor=0557,
> >> >> idProduct=2221
> >> >> [ 3.403526] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> >> >> SerialNumber=0
> >> >> [ 3.410814] usb 1-1.2: Product: Hermon USB hidmouse Device
> >> >> [ 3.416282] usb 1-1.2: Manufacturer: Winbond Electronics Corp
> >> >> [ 3.423736] hidraw: raw HID events driver (C) Jiri Kosina
> >> >> [ 3.430436] usbcore: registered new interface driver usbhid
> >> >> [ 3.435922] usbhid: USB HID core driver
> >> >> [ 3.440716] input: Winbond Electronics Corp Hermon USB hidmouse
> >> >> Device as
> >> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
> >> 1.2:1.0/0003:0557:2221.0001/input/input2
> >> >> [ 3.455434] hid-generic 0003:0557:2221.0001: input,hidraw0: USB
> HID
> >> >> v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on
> >> >> usb-0000:00:1a.0-1.2/input0
> >> >> [ 3.470147] input: Winbond Electronics Corp Hermon USB hidmouse
> >> >> Device as
> >> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
> >> 1.2:1.1/0003:0557:2221.0002/input/input3
> >> >> [ 3.484849] hid-generic 0003:0557:2221.0002: input,hidraw1: USB
> HID
> >> >> v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device]
> >> >> on usb-0000:00:1a.0-1.2/input1
> >> >> [ 3.507384] PM: Starting manual resume from disk
> >> >> [ 3.511922] PM: Hibernation image partition 8:1 present
> >> >> [ 3.511923] PM: Looking for hibernation image.
> >> >> [ 3.512127] PM: Image not found (code -22)
> >> >> [ 3.512131] PM: Hibernation image not present or could not be
> >> >> loaded.
> >> >> [ 3.517313] EXT4-fs (sda2): mounting ext3 file system using the
> >> >> ext4 subsystem
> >> >> [ 3.529000] EXT4-fs (sda2): mounted filesystem with ordered data
> >> >> mode. Opts: (null)
> >> >> [ 3.715841] Switched to clocksource tsc
> >> >> [ 3.885031] udevd[667]: starting version 175
> >> >> [ 4.011695] input: Power Button as
> >> >> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
> >> >> [ 4.020070] ACPI: Power Button [PWRB]
> >> >> [ 4.023703] input: Power Button as
> >> >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
> >> >> [ 4.031033] ACPI: Power Button [PWRF]
> >> >> [ 4.034781] EDAC MC: Ver: 3.0.0
> >> >> [ 4.038626] EDAC MC0: Giving out device to module ie31200_edac
> >> >> controller IE31200: DEV 0000:00:00.0 (POLLED)
> >> >> [ 4.115904] ipmi message handler version 39.2
> >> >> [ 4.121319] IPMI System Interface driver.
> >> >> [ 4.126068] ipmi_si: probing via ACPI
> >> >> [ 4.129851] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
> >> >> [ 4.135777] i40e 0000:02:00.1 rename5: renamed from eth3
> >> >> [ 4.141149] ipmi_si: Adding ACPI-specified kcs state machine
> >> >> [ 4.147092] ipmi_si: probing via SMBIOS
> >> >> [ 4.147160] input: PC Speaker as
> >> >> /devices/platform/pcspkr/input/input6
> >> >> [ 4.157409] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
> >> >> [ 4.163305] ipmi_si: Adding SMBIOS-specified kcs state machine
> >> >> duplicate interface
> >> >> [ 4.170854] ipmi_si: probing via SPMI
> >> >> [ 4.174504] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
> >> >> [ 4.177849] i40e 0000:02:00.0 rename3: renamed from eth1
> >> >> [ 4.185527] ipmi_si: Adding SPMI-specified kcs state machine
> >> >> [ 4.185655] ACPI Warning: SystemIO range
> >> >> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
> >> >> 0x0000000000000400-0x000000000000047F (\PMIO) (20140926/utaddress-
> 254)
> >> >> [ 4.185658] ACPI: If an ACPI driver is available for this device,
> >> >> you should use it instead of the native driver
> >> >> [ 4.185660] ACPI Warning: SystemIO range
> >> >> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
> >> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-
> 254)
> >> >> [ 4.185662] ACPI: If an ACPI driver is available for this device,
> >> >> you should use it instead of the native driver
> >> >> [ 4.185662] ACPI Warning: SystemIO range
> >> >> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> >> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-
> 254)
> >> >> [ 4.185664] ACPI: If an ACPI driver is available for this device,
> >> >> you should use it instead of the native driver
> >> >> [ 4.185664] ACPI Warning: SystemIO range
> >> >> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
> >> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-
> 254)
> >> >> [ 4.185665] ACPI: If an ACPI driver is available for this device,
> >> >> you should use it instead of the native driver
> >> >> [ 4.185665] lpc_ich: Resource conflict(s) found affecting
> gpio_ich
> >> >> [ 4.280990] iTCO_vendor_support: vendor-support=0
> >> >> [ 4.304270] duplicate interface
> >> >> [ 4.307664] ipmi_si: Trying ACPI-specified kcs state machine at
> i/o
> >> >> address 0xca2, slave address 0x0, irq 0
> >> >> [ 4.318187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> >> >> [ 4.323711] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
> >> >> TCOBASE=0x0460)
> >> >> [ 4.323818] e1000e 0000:00:19.0 eth3: renamed from eth0
> >> >> [ 4.336446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> >> >> [ 4.342474] AVX version of gcm_enc/dec engaged.
> >> >> [ 4.346907] AES CTR mode by8 optimization enabled
> >> >> [ 4.351931] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> >> >> [ 4.352819] alg: No test for __gcm-aes-aesni
> >> >> (__driver-gcm-aes-aesni)
> >> >> [ 4.364158] i40e 0000:02:00.1 eth1: renamed from rename5
> >> >> [ 4.370154] [drm] Initialized drm 1.1.0 20060810
> >> >> [ 4.374797] Error: Driver 'pcspkr' is already registered,
> >> >> aborting...
> >> >> [ 4.381228] alg: No test for crc32 (crc32-pclmul)
> >> >> [ 4.395990] [TTM] Zone kernel: Available graphics memory:
> 16494382
> >> >> kiB
> >> >> [ 4.396626] i40e 0000:02:00.0 eth0: renamed from rename3
> >> >> [ 4.407813] [TTM] Zone dma32: Available graphics memory:
> 2097152
> >> >> kiB
> >> >> [ 4.414324] [TTM] Initializing pool allocator
> >> >> [ 4.418678] [TTM] Initializing DMA pool allocator
> >> >> [ 4.425605] intel_rapl: Found RAPL domain package
> >> >> [ 4.430215] intel_rapl: Found RAPL domain core
> >> >> [ 4.446166] fbcon: mgadrmfb (fb0) is primary device
> >> >> [ 4.489833] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c,
> >> >> prod_id: 0x0624, dev_id: 0x20)
> >> >> [ 4.489843] ipmi_si 00:0a: IPMI kcs interface initialized
> >> >> [ 4.604074] Console: switching to colour frame buffer device
> 128x48
> >> >> [ 4.698245] mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer
> device
> >> >> [ 4.704491] mgag200 0000:06:03.0: registered panic notifier
> >> >> [ 4.733133] [drm] Initialized mgag200 1.0.0 20110418 for
> >> >> 0000:06:03.0 on minor 0
> >> >> [ 4.975874] Adding 3905532k swap on /dev/sda1. Priority:-1
> >> >> extents:1 across:3905532k SSFS
> >> >> [ 5.002394] EXT4-fs (sda2): re-mounted. Opts: (null)
> >> >> [ 5.044749] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
> >> >> [ 5.077354] loop: module loaded
> >> >> [ 5.087636] Ethernet Channel Bonding Driver: v3.7.1 (April 27,
> >> >> 2011)
> >> >> [ 5.101990] nf_conntrack version 0.5.0 (17374463 buckets,
> 138995704
> >> >> max)
> >> >> [ 5.108653] nf_conntrack: falling back to vmalloc.
> >> >> [ 5.735510] random: dd urandom read with 92 bits of entropy
> >> >> available
> >> >> [ 5.927034] bond0: Setting xmit hash policy to layer3+4 (1)
> >> >> [ 5.927105] bond0: Setting MII monitoring interval to 100
> >> >> [ 5.963685] bond0: Setting LACP rate to slow (0)
> >> >> [ 6.119830] bond0: Adding slave eth0
> >> >> [ 6.119841] i40e 0000:02:00.0 eth0: already using mac address
> >> >> 3c:fd:fe:9c:56:b8
> >> >> [ 6.123689] i40e 0000:02:00.0 eth0: NIC Link is Up 10 Gbps Full
> >> >> Duplex, Flow Control: None
> >> >> [ 6.123746] bond0: Enslaving eth0 as a backup interface with an
> up
> >> >> link
> >> >> [ 6.126208] bond0: Adding slave eth1
> >> >> [ 6.126212] i40e 0000:02:00.1 eth1: set new mac address
> >> >> 3c:fd:fe:9c:56:b8
> >> >> [ 6.135693] i40e 0000:02:00.1 eth1: NIC Link is Up 10 Gbps Full
> >> >> Duplex, Flow Control: None
> >> >> [ 6.135756] bond0: Enslaving eth1 as a backup interface with an
> up
> >> >> link
> >> >> [ 7.145905] random: nonblocking pool is initialized
> >> >> [ 12.460991] Process accounting resumed
> >> >> [ 12.918920] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
> >> >> [ 13.021814] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
> >> >> [ 13.279044] nf_conntrack: falling back to vmalloc.
> >> >> [ 13.323161] ip_tables: (C) 2000-2006 Netfilter Core Team
> >> >>
> >> >> On 2015-08-27 16:43, Rose, Gregory V wrote:
> >> >>>> -----Original Message-----
> >> >>>> From: Christian Ruppert [mailto:***@qasl.de]
> >> >>>> Sent: Thursday, August 27, 2015 4:54 AM
> >> >>>> To: Fujinaka, Todd
> >> >>>> Cc: Rose, Gregory V; e1000-***@lists.sf.net
> >> >>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >> >>>>
> >> >>>> Well, that's it for now anyway...
> >> >>>>
> >> >>>> ...
> >> >>>> Power cycle is required to complete the update process.
> >> >>>> Tool execution completed with the following status: All operations
> >> >>>> completed successfully
> >> >>>>
> >> >>>> The card doesn't even appear in "lspci" anymore... :/ I used a
> Win7
> >> >>>> to
> >> >>>> flash it since a co-worker already broke one when flashing via
> >> >>>> Linux. No
> >> >>>> idea how to unbrick it.
> >> >>>
> >> >>> Christian,
> >> >>>
> >> >>> I'm very sorry to hear that. It is pretty rare for this sort of
> >> >>> thing
> >> >>> to happen but not unheard of. Please contact ***@intel.com to
> >> >>> get
> >> >>> help replacing the part.
> >> >>>
> >> >>> - Greg
> >> >>>
> >> >>>>
> >> >>>>
> >> >>>> On 2015-08-27 01:25, Fujinaka, Todd wrote:
> >> >>>> > Attachments don't work on this mailing list (though they may
> have
> >> >>>> > gotten to Greg). Please file a bug on e1000.sourceforge.net and
> >> attach
> >> >>>> > the files there.
> >> >>>> >
> >> >>>> > Todd Fujinaka
> >> >>>> > Software Application Engineer
> >> >>>> > Networking Division (ND)
> >> >>>> > Intel Corporation
> >> >>>> > ***@intel.com
> >> >>>> > (503) 712-4565
> >> >>>> >
> >> >>>> > -----Original Message-----
> >> >>>> > From: Christian Ruppert [mailto:***@qasl.de]
> >> >>>> > Sent: Wednesday, August 26, 2015 10:24 AM
> >> >>>> > To: Rose, Gregory V
> >> >>>> > Cc: e1000-***@lists.sf.net
> >> >>>> > Subject: Re: [E1000-devel] X710 / i40e interface resets
> >> >>>> >
> >> >>>> > On 2015-08-26 01:19, Rose, Gregory V wrote:
> >> >>>> >>> -----Original Message-----
> >> >>>> >>> From: Christian Ruppert [mailto:***@qasl.de]
> >> >>>> >>> Sent: Friday, August 21, 2015 7:06 AM
> >> >>>> >>> To: Rose, Gregory V
> >> >>>> >>> Cc: e1000-***@lists.sf.net
> >> >>>> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >> >>>> >>>
> >> >>>> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
> >> >>>> >>> >> -----Original Message-----
> >> >>>> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
> >> >>>> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
> >> >>>> >>> >> To: Rose, Gregory V
> >> >>>> >>> >> Cc: e1000-***@lists.sf.net
> >> >>>> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >> >>>> >>> >>
> >> >>>> >>
> >> >>>> >> [snip]
> >> >>>> >>
> >> >>>> >>> > I've been told that the Tx driver issue detected message is
> due
> >> to
> >> >>>> >>> > a MDD (Malicious Driver Detection) event. We need to find
> out
> >> what
> >> >>>> >>> > is causing that so if you could please send me your system
> log
> >> and
> >> >>>> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I
> >> can
> >> >>>> >>> > see what might be occurring. If not then we'll have to
> debug
> >> >>>> further.
> >> >>>> >>>
> >> >>>> >>> See the initial Mail for ethtool -k and so on. Also:
> >> >>>> >>> # ethtool eth0
> >> >>>> >>> Settings for eth0:
> >> >>>> >>> Supported ports: [ FIBRE ]
> >> >>>> >>> Supported link modes: 1000baseT/Full
> >> >>>> >>> 10000baseT/Full
> >> >>>> >>> Supported pause frame use: Symmetric
> >> >>>> >>> Supports auto-negotiation: No
> >> >>>> >>> Advertised link modes: 1000baseT/Full
> >> >>>> >>> 10000baseT/Full
> >> >>>> >>> Advertised pause frame use: No
> >> >>>> >>> Advertised auto-negotiation: No
> >> >>>> >>> Speed: 10000Mb/s
> >> >>>> >>> Duplex: Full
> >> >>>> >>> Port: FIBRE
> >> >>>> >>> PHYAD: 0
> >> >>>> >>> Transceiver: external
> >> >>>> >>> Auto-negotiation: off
> >> >>>> >>> Supports Wake-on: d
> >> >>>> >>> Wake-on: d
> >> >>>> >>> Current message level: 0x0000000f (15)
> >> >>>> >>> drv probe link timer
> >> >>>> >>> Link detected: yes
> >> >>>> >>> # ethtool -i eth0
> >> >>>> >>> driver: i40e
> >> >>>> >>> version: 1.2.48
> >> >>>> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
> >> >>>> >>> bus-info: 0000:02:00.0
> >> >>>> >>> supports-statistics: yes
> >> >>>> >>> supports-test: yes
> >> >>>> >>> supports-eeprom-access: yes
> >> >>>> >>> supports-register-dump: yes
> >> >>>> >>> supports-priv-flags: yes
> >> >>>> >>
> >> >>>> >> I also need the output of 'dmesg' - and I need to figure out
> how
> >> to
> >> >>>> >> determine what specific MDD event is occurring. I'll get back
> to
> >> you
> >> >>>> >> with instructions on how to do that when I get the system log
> from
> >> >>>> >> you.
> >> >>>> >
> >> >>>> > See the attached file. It's a dmesg from boot + some minutes.
> >> >>>> > I'll upgrade the card's firmware tomorrow I guess and try out
> the
> >> new
> >> >>>> > drivers btw.
> >> >>>> >
> >> >>>> >>
> >> >>>> >> Thanks,
> >> >>>> >>
> >> >>>> >> - Greg
> >> >>>> >
> >> >>>> > --
> >> >>>> > Regards,
> >> >>>> > Christian Ruppert
> >> >>>>
> >> >>>> --
> >> >>>> Regards,
> >> >>>> Christian Ruppert
> >>
> >> --
> >> Regards,
> >> Christian Ruppert
>
> --
> Regards,
> Christian Ruppert
Christian Ruppert
2015-10-07 17:53:33 UTC
Permalink
On 2015-10-07 18:49, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Wednesday, October 07, 2015 8:00 AM
>> To: Rose, Gregory V
>> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> On 2015-10-07 16:14, Rose, Gregory V wrote:
>> >> -----Original Message-----
>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> Sent: Wednesday, October 07, 2015 12:59 AM
>> >> To: Rose, Gregory V
>> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>
>> >> Is there anything else I can do to help to get that debugged/fixed?
>> >> We upgraded the connection from 1G to 10G btw (it was 1G before).
>> >
>> > We'll need to get a setup to reproduce the problem so we can debug it.
>> > Can you provide that information? Or perhaps you've provided it
>> > before and I'm just not seeing it? If that's the case can you point
>> > me to it again?
>> >
>> > Thanks,
>> >
>> > - Greg
>>
>> Hi Greg,
>>
>> in this case it's a Supermicro 5017C-MTF (X9SCL/X9SCM) using a X710
>> 10GE
>> card, both ports connected to 10GE switch ports (LACP).
>> WAN->Router->Swich->Host
>> The host in this case acts as a loadbalancer using e.g. Varnish and
>> HAProxy and doing mostly HTTP traffic (also SSL termination).
>> Do you need anything else?
>
> Maybe, but first let me ask you if you're using the VEPA mode work
> around for bonding?
>

No, just the basic bonding in 802.3ad mode. We don't use VEPA at all.

> - Greg
>
>>
>> >
>> >>
>> >> On 2015-09-28 16:53, Christian Ruppert wrote:
>> >> > And there we go:
>> >> >
>> >> > [77571.409182] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [77572.245943] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> > [94412.738896] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [94413.569379] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> > [94516.443592] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [94516.718341] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> > [96850.580882] i40e 0000:02:00.0: TX driver issue detected, PF reset
>> >> > issued
>> >> > [96851.036998] bond0: link status up again after 0 ms for interface
>> >> > eth0
>> >> > [96939.474122] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [96940.217799] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> > [96945.007365] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [96945.225029] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> > [96965.362669] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [96966.255350] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> > [99844.991331] i40e 0000:02:00.0: TX driver issue detected, PF reset
>> >> > issued
>> >> > [99845.360288] bond0: link status up again after 0 ms for interface
>> >> > eth0
>> >> > [159908.054220] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [159909.165679] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> > [329531.138706] i40e 0000:02:00.1: TX driver issue detected, PF reset
>> >> > issued
>> >> > [329532.167421] bond0: link status up again after 0 ms for interface
>> >> > eth1
>> >> >
>> >> > On 2015-09-25 16:19, Christian Ruppert wrote:
>> >> >> Hi,
>> >> >>
>> >> >> the card came back and I had to flash it again but it worked
>> perfectly
>> >> >> fine this time :)
>> >> >> So I setup a new Kernel (3.18.20) and the most recent i40e driver
>> >> >> (1.3.39.1) and removed the previous workaround to disable ntuples on
>> >> >> both interfaces. So basically a vanilla setup.
>> >> >> That host is up for several hours no and there was no spam so far
>> and
>> >> >> only one reset yet:
>> >> >> Sep 25 12:38:54 somehost kernel: [77571.409182] i40e 0000:02:00.1:
>> TX
>> >> >> driver issue detected, PF reset issued
>> >> >> Sep 25 12:38:55 somehost kernel: [77572.245943] bond0: link status
>> up
>> >> >> again after 0 ms for interface eth1
>> >> >>
>> >> >> and here's the requested dmesg again:
>> >> >> [ 0.000000] Initializing cgroup subsys cpuset
>> >> >> [ 0.000000] Initializing cgroup subsys cpu
>> >> >> [ 0.000000] Initializing cgroup subsys cpuacct
>> >> >> [ 0.000000] Linux version 3.18.20 (***@somehost) (gcc version
>> 4.7.2
>> >> >> (Debian 4.7.2-5) ) #1 SMP Wed Aug 26 14:25:15 CEST 2015
>> >> >> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>> >> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>> >> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>> >> >> [ 0.000000] e820: BIOS-provided physical RAM map:
>> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-
>> 0x0000000000099bff]
>> >> >> usable
>> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000000099c00-
>> 0x000000000009ffff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-
>> 0x00000000000fffff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-
>> 0x00000000becc8fff]
>> >> >> usable
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000becc9000-
>> 0x00000000bed0bfff]
>> >> >> ACPI NVS
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000bed0c000-
>> 0x00000000ce491fff]
>> >> >> usable
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce492000-
>> 0x00000000ce534fff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce535000-
>> 0x00000000ce5c6fff]
>> >> >> usable
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce5c7000-
>> 0x00000000ce68bfff]
>> >> >> ACPI NVS
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ce68c000-
>> 0x00000000cf7fefff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-
>> 0x00000000cf7fffff]
>> >> >> usable
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-
>> 0x00000000efffffff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-
>> 0x00000000fec00fff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-
>> 0x00000000fed03fff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-
>> 0x00000000fed1ffff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-
>> 0x00000000fee00fff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-
>> 0x00000000ffffffff]
>> >> >> reserved
>> >> >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-
>> 0x000000082fffffff]
>> >> >> usable
>> >> >> [ 0.000000] console [earlyser0] enabled
>> >> >> [ 0.000000] NX (Execute Disable) protection: active
>> >> >> [ 0.000000] SMBIOS 2.7 present.
>> >> >> [ 0.000000] DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 2.2
>> >> >> 02/20/2015
>> >> >> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
>> >> >> reserved
>> >> >> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>> >> >> [ 0.000000] AGP: No AGP bridge found
>> >> >> [ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
>> >> >> [ 0.000000] MTRR default type: uncachable
>> >> >> [ 0.000000] MTRR fixed ranges enabled:
>> >> >> [ 0.000000] 00000-9FFFF write-back
>> >> >> [ 0.000000] A0000-BFFFF uncachable
>> >> >> [ 0.000000] C0000-CBFFF write-protect
>> >> >> [ 0.000000] CC000-E7FFF uncachable
>> >> >> [ 0.000000] E8000-FFFFF write-protect
>> >> >> [ 0.000000] MTRR variable ranges enabled:
>> >> >> [ 0.000000] 0 base 000000000 mask 800000000 write-back
>> >> >> [ 0.000000] 1 base 800000000 mask FE0000000 write-back
>> >> >> [ 0.000000] 2 base 820000000 mask FF0000000 write-back
>> >> >> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
>> >> >> [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
>> >> >> [ 0.000000] 5 disabled
>> >> >> [ 0.000000] 6 disabled
>> >> >> [ 0.000000] 7 disabled
>> >> >> [ 0.000000] 8 disabled
>> >> >> [ 0.000000] 9 disabled
>> >> >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
>> >> >> 0x7010600070106
>> >> >> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
>> >> >> reserved
>> >> >> [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
>> >> >> [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf]
>> >> >> mapped at [ffff8800000fd7b0]
>> >> >> [ 0.000000] Base memory trampoline at [ffff880000093000] 93000
>> size
>> >> >> 24576
>> >> >> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>> >> >> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
>> >> >> [ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
>> >> >> [ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
>> >> >> [ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
>> >> >> [ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
>> >> >> [ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M
>> >> >> [ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
>> >> >> [ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
>> >> >> [ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M
>> >> >> [ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff]
>> >> >> [ 0.000000] [mem 0x800000000-0x82bffffff] page 2M
>> >> >> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbecc8fff]
>> >> >> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
>> >> >> [ 0.000000] [mem 0x00200000-0xbebfffff] page 2M
>> >> >> [ 0.000000] [mem 0xbec00000-0xbecc8fff] page 4k
>> >> >> [ 0.000000] init_memory_mapping: [mem 0xbed0c000-0xce491fff]
>> >> >> [ 0.000000] [mem 0xbed0c000-0xbedfffff] page 4k
>> >> >> [ 0.000000] [mem 0xbee00000-0xce3fffff] page 2M
>> >> >> [ 0.000000] [mem 0xce400000-0xce491fff] page 4k
>> >> >> [ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
>> >> >> [ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
>> >> >> [ 0.000000] init_memory_mapping: [mem 0xce535000-0xce5c6fff]
>> >> >> [ 0.000000] [mem 0xce535000-0xce5c6fff] page 4k
>> >> >> [ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
>> >> >> [ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
>> >> >> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
>> >> >> [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
>> >> >> [ 0.000000] RAMDISK: [mem 0x360c0000-0x37057fff]
>> >> >> [ 0.000000] ACPI: Early table checksum verification disabled
>> >> >> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
>> >> >> [ 0.000000] ACPI: XSDT 0x00000000CE64F088 00008C (v01 SUPERM
>> >> >> SMCI--MB 00000001 AMI 00010013)
>> >> >> [ 0.000000] ACPI: FACP 0x00000000CE65A210 00010C (v05 SUPERM
>> >> >> SMCI--MB 00000001 AMI 00010013)
>> >> >> [ 0.000000] ACPI: DSDT 0x00000000CE64F1A8 00B068 (v02 SUPERM
>> >> >> SMCI--MB 00000000 INTL 20051117)
>> >> >> [ 0.000000] ACPI: FACS 0x00000000CE68A080 000040
>> >> >> [ 0.000000] ACPI: APIC 0x00000000CE65A320 000092 (v03 SUPERM
>> >> >> SMCI--MB 00000001 AMI 00010013)
>> >> >> [ 0.000000] ACPI: FPDT 0x00000000CE65A3B8 000044 (v01 SUPERM
>> >> >> SMCI--MB 00000001 AMI 00010013)
>> >> >> [ 0.000000] ACPI: MCFG 0x00000000CE65A400 00003C (v01 SUPERM
>> >> >> SMCI--MB 00000001 MSFT 00000097)
>> >> >> [ 0.000000] ACPI: HPET 0x00000000CE65A440 000038 (v01 SUPERM
>> >> >> SMCI--MB 00000001 AMI. 00000005)
>> >> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A478 000397 (v01 SataRe
>> >> >> SataTabl 00001000 INTL 20091112)
>> >> >> [ 0.000000] ACPI: SPMI 0x00000000CE65A810 000040 (v05 A M I
>> >> >> OEMSPMI 00000000 AMI. 00000000)
>> >> >> [ 0.000000] ACPI: SSDT 0x00000000CE65A850 0009A4 (v01 PmRef
>> >> >> Cpu0Ist 00003000 INTL 20051117)
>> >> >> [ 0.000000] ACPI: SSDT 0x00000000CE65B1F8 000B18 (v01 PmRef
>> CpuPm
>> >> >> 00003000 INTL 20051117)
>> >> >> [ 0.000000] ACPI: EINJ 0x00000000CE65BD10 000130 (v01 AMI AMI
>> >> >> EINJ 00000000 00000000)
>> >> >> [ 0.000000] ACPI: ERST 0x00000000CE65BE40 000210 (v01 AMIER AMI
>> >> >> ERST 00000000 00000000)
>> >> >> [ 0.000000] ACPI: HEST 0x00000000CE65C050 0000A8 (v01 AMI AMI
>> >> >> HEST 00000000 00000000)
>> >> >> [ 0.000000] ACPI: BERT 0x00000000CE65C0F8 000030 (v01 AMI AMI
>> >> >> BERT 00000000 00000000)
>> >> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> >> >> [ 0.000000] No NUMA configuration found
>> >> >> [ 0.000000] Faking a node at [mem
>> >> >> 0x0000000000000000-0x000000082fffffff]
>> >> >> [ 0.000000] NODE_DATA(0) allocated [mem 0x82ffdc000-0x82ffdffff]
>> >> >> [ 0.000000] [ffffea0000000000-ffffea001cbfffff] PMD ->
>> >> >> [ffff88080f600000-ffff88082b7fffff] on node 0
>> >> >> [ 0.000000] Zone ranges:
>> >> >> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>> >> >> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
>> >> >> [ 0.000000] Normal [mem 0x100000000-0x82fffffff]
>> >> >> [ 0.000000] Movable zone start for each node
>> >> >> [ 0.000000] Early memory node ranges
>> >> >> [ 0.000000] node 0: [mem 0x00001000-0x00098fff]
>> >> >> [ 0.000000] node 0: [mem 0x00100000-0xbecc8fff]
>> >> >> [ 0.000000] node 0: [mem 0xbed0c000-0xce491fff]
>> >> >> [ 0.000000] node 0: [mem 0xce535000-0xce5c6fff]
>> >> >> [ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
>> >> >> [ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
>> >> >> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x82fffffff]
>> >> >> [ 0.000000] On node 0 totalpages: 8381562
>> >> >> [ 0.000000] DMA zone: 56 pages used for memmap
>> >> >> [ 0.000000] DMA zone: 21 pages reserved
>> >> >> [ 0.000000] DMA zone: 3992 pages, LIFO batch:0
>> >> >> [ 0.000000] DMA32 zone: 11498 pages used for memmap
>> >> >> [ 0.000000] DMA32 zone: 840930 pages, LIFO batch:31
>> >> >> [ 0.000000] Normal zone: 103040 pages used for memmap
>> >> >> [ 0.000000] Normal zone: 7536640 pages, LIFO batch:31
>> >> >> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>> >> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>> >> >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>> >> >> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000]
>> gsi_base[0])
>> >> >> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
>> >> >> GSI 0-23
>> >> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
>> >> >> dfl)
>> >> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>> >> >> level)
>> >> >> [ 0.000000] ACPI: IRQ0 used by override.
>> >> >> [ 0.000000] ACPI: IRQ9 used by override.
>> >> >> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> >> >> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>> >> >> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0x00000000-0x00000fff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0x00099000-0x00099fff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0x0009a000-0x0009ffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0x000a0000-0x000dffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0x000e0000-0x000fffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xbecc9000-0xbed0bfff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xce492000-0xce534fff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xce5c7000-0xce68bfff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xce68c000-0xcf7fefff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xcf800000-0xdfffffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xe0000000-0xefffffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xf0000000-0xfebfffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfec00000-0xfec00fff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfec01000-0xfecfffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfed00000-0xfed03fff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfed04000-0xfed1bfff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfed1c000-0xfed1ffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfed20000-0xfedfffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfee00000-0xfee00fff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xfee01000-0xfeffffff]
>> >> >> [ 0.000000] PM: Registered nosave memory: [mem
>> >> >> 0xff000000-0xffffffff]
>> >> >> [ 0.000000] e820: [mem 0xcf800000-0xdfffffff] available for PCI
>> >> >> devices
>> >> >> [ 0.000000] Booting paravirtualized kernel on bare hardware
>> >> >> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
>> >> >> nr_cpu_ids:8 nr_node_ids:1
>> >> >> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88082fc00000
>> s80960
>> >> >> r8192 d29632 u262144
>> >> >> [ 0.000000] pcpu-alloc: s80960 r8192 d29632 u262144
>> alloc=1*2097152
>> >> >> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>> >> >> [ 0.000000] Built 1 zonelists in Node order, mobility grouping
>> on.
>> >> >> Total pages: 8266947
>> >> >> [ 0.000000] Policy zone: Normal
>> >> >> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.20
>> >> >> root=UUID=ea7a13a2-a96b-4165-801a-119b0f0d9b8f ro ipv6.disable=1
>> >> >> intel_pstate=disable earlyprintk=ttyS0,115200,keep intel_iommu=off
>> >> >> [ 0.000000] Intel-IOMMU: disabled
>> >> >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> >> >> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
>> >> >> standard form
>> >> >> [ 0.000000] AGP: Checking aperture...
>> >> >> [ 0.000000] AGP: No AGP bridge found
>> >> >> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
>> >> >> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
>> >> >> bailing!
>> >> >> [ 0.000000] Memory: 32970712K/33526248K available (5512K kernel
>> >> >> code, 966K rwdata, 1832K rodata, 1228K init, 852K bss, 555536K
>> >> >> reserved)
>> >> >> [ 0.000000] Hierarchical RCU implementation.
>> >> >> [ 0.000000] RCU dyntick-idle grace-period acceleration is
>> >> enabled.
>> >> >> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to
>> >> nr_cpu_ids=8.
>> >> >> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
>> >> >> nr_cpu_ids=8
>> >> >> [ 0.000000] NR_IRQS:33024 nr_irqs:488 0
>> >> >> [ 0.000000] Console: colour VGA+ 80x25
>> >> >> [ 0.000000] console [tty0] enabled
>> >> >> [ 0.000000] allocated 134217728 bytes of page_cgroup
>> >> >> [ 0.000000] please try 'cgroup_disable=memory' option if you
>> don't
>> >> >> want memory cgroups
>> >> >> [ 0.000000] hpet clockevent registered
>> >> >> [ 0.000000] tsc: Fast TSC calibration failed
>> >> >> [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
>> >> >> [ 0.000000] tsc: Detected 3499.669 MHz processor
>> >> >> [ 0.000025] Calibrating delay loop (skipped), value calculated
>> >> >> using timer frequency.. 6999.33 BogoMIPS (lpj=13998676)
>> >> >> [ 0.010617] pid_max: default: 32768 minimum: 301
>> >> >> [ 0.015230] ACPI: Core revision 20140926
>> >> >> [ 0.024681] ACPI: All ACPI Tables successfully acquired
>> >> >> [ 0.039606] Security Framework initialized
>> >> >> [ 0.043611] AppArmor: AppArmor disabled by boot time parameter
>> >> >> [ 0.049421] Yama: becoming mindful.
>> >> >> [ 0.054266] Dentry cache hash table entries: 4194304 (order: 13,
>> >> >> 33554432 bytes)
>> >> >> [ 0.067119] Inode-cache hash table entries: 2097152 (order: 12,
>> >> >> 16777216 bytes)
>> >> >> [ 0.076825] Mount-cache hash table entries: 65536 (order: 7,
>> 524288
>> >> >> bytes)
>> >> >> [ 0.083636] Mountpoint-cache hash table entries: 65536 (order: 7,
>> >> >> 524288 bytes)
>> >> >> [ 0.091133] Initializing cgroup subsys memory
>> >> >> [ 0.095401] Initializing cgroup subsys devices
>> >> >> [ 0.099824] Initializing cgroup subsys freezer
>> >> >> [ 0.104249] Initializing cgroup subsys net_cls
>> >> >> [ 0.108676] Initializing cgroup subsys blkio
>> >> >> [ 0.112929] Initializing cgroup subsys perf_event
>> >> >> [ 0.117615] Initializing cgroup subsys net_prio
>> >> >> [ 0.122145] CPU: Physical Processor ID: 0
>> >> >> [ 0.126120] CPU: Processor Core ID: 0
>> >> >> [ 0.129769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>> >> >> [ 0.129769] ENERGY_PERF_BIAS: View and update with
>> >> >> x86_energy_perf_policy(8)
>> >> >> [ 0.143037] mce: CPU supports 9 MCE banks
>> >> >> [ 0.146959] CPU0: Thermal monitoring enabled (TM1)
>> >> >> [ 0.151728] process: using mwait in idle threads
>> >> >> [ 0.156328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>> >> >> [ 0.156328] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB
>> 0
>> >> >> [ 0.168125] Freeing SMP alternatives memory: 20K
>> (ffffffff81a26000
>> >> >> - ffffffff81a2b000)
>> >> >> [ 0.176733] ftrace: allocating 22083 entries in 87 pages
>> >> >> [ 0.197324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> >> >> [ 0.242968] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 V2 @
>> >> >> 3.50GHz (fam: 06, model: 3a, stepping: 09)
>> >> >> [ 0.252247] TSC deadline timer enabled
>> >> >> [ 0.252264] Performance Events: PEBS fmt1+, 16-deep LBR,
>> IvyBridge
>> >> >> events, full-width counters, Intel PMU driver.
>> >> >> [ 0.262484] ... version: 3
>> >> >> [ 0.266477] ... bit width: 48
>> >> >> [ 0.270555] ... generic registers: 4
>> >> >> [ 0.274548] ... value mask: 0000ffffffffffff
>> >> >> [ 0.279843] ... max period: 0000ffffffffffff
>> >> >> [ 0.285137] ... fixed-purpose events: 3
>> >> >> [ 0.289130] ... event mask: 000000070000000f
>> >> >> [ 0.295409] x86: Booting SMP configuration:
>> >> >> [ 0.299494] .... node #0, CPUs: #1
>> >> >> [ 0.316534] NMI watchdog: enabled on all CPUs, permanently
>> consumes
>> >> >> one hw-PMU counter.
>> >> >> [ 0.324669] #2 #3 #4 #5 #6 #7
>> >> >> [ 0.407240] x86: Booted up 1 node, 8 CPUs
>> >> >> [ 0.411319] smpboot: Total of 8 processors activated (55994.70
>> >> >> BogoMIPS)
>> >> >> [ 0.424047] devtmpfs: initialized
>> >> >> [ 0.430926] PM: Registering ACPI NVS region [mem
>> >> >> 0xbecc9000-0xbed0bfff] (274432 bytes)
>> >> >> [ 0.438777] PM: Registering ACPI NVS region [mem
>> >> >> 0xce5c7000-0xce68bfff] (806912 bytes)
>> >> >> [ 0.447304] pinctrl core: initialized pinctrl subsystem
>> >> >> [ 0.452519] NET: Registered protocol family 16
>> >> >> [ 0.468890] cpuidle: using governor ladder
>> >> >> [ 0.488929] cpuidle: using governor menu
>> >> >> [ 0.492803] ACPI FADT declares the system doesn't support PCIe
>> >> >> ASPM, so disable it
>> >> >> [ 0.500309] ACPI: bus type PCI registered
>> >> >> [ 0.504301] acpiphp: ACPI Hot Plug PCI Controller Driver version:
>> >> >> 0.5
>> >> >> [ 0.510784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>> >> >> 0xe0000000-0xefffffff] (base 0xe0000000)
>> >> >> [ 0.520010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
>> >> >> in E820
>> >> >> [ 0.526980] PCI: Using configuration type 1 for base access
>> >> >> [ 0.544821] ACPI: Added _OSI(Module Device)
>> >> >> [ 0.548905] ACPI: Added _OSI(Processor Device)
>> >> >> [ 0.553330] ACPI: Added _OSI(3.0 _SCP Extensions)
>> >> >> [ 0.558017] ACPI: Added _OSI(Processor Aggregator Device)
>> >> >> [ 0.565243] ACPI: Executed 1 blocks of module-level executable
>> AML
>> >> >> code
>> >> >> [ 0.739624] \_SB_:_OSC invalid UUID
>> >> >> [ 0.739625] _OSC request data:1 1f
>> >> >> [ 0.739811] ACPI: Dynamic OEM Table Load:
>> >> >> [ 0.743707] ACPI: SSDT 0xFFFF880807B5C000 00083B (v01 PmRef
>> >> >> Cpu0Cst 00003001 INTL 20051117)
>> >> >> [ 0.764280] ACPI: Dynamic OEM Table Load:
>> >> >> [ 0.768173] ACPI: SSDT 0xFFFF880807049C00 000303 (v01 PmRef
>> ApIst
>> >> >> 00003000 INTL 20051117)
>> >> >> [ 0.788649] ACPI: Dynamic OEM Table Load:
>> >> >> [ 0.792543] ACPI: SSDT 0xFFFF880807007C00 000119 (v01 PmRef
>> ApCst
>> >> >> 00003000 INTL 20051117)
>> >> >> [ 0.813761] ACPI: Interpreter enabled
>> >> >> [ 0.817329] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>> >> >> State [\_S2_] (20140926/hwxface-580)
>> >> >> [ 0.826523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
>> >> >> State [\_S3_] (20140926/hwxface-580)
>> >> >> [ 0.835727] ACPI: (supports S0 S1 S4 S5)
>> >> >> [ 0.839628] ACPI: Using IOAPIC for interrupt routing
>> >> >> [ 0.844615] HEST: Table parsing has been initialized.
>> >> >> [ 0.849610] PCI: Using host bridge windows from ACPI; if
>> necessary,
>> >> >> use "pci=nocrs" and report a bug
>> >> >> [ 0.863689] ACPI: Power Resource [FN00] (off)
>> >> >> [ 0.868006] ACPI: Power Resource [FN01] (off)
>> >> >> [ 0.872344] ACPI: Power Resource [FN02] (off)
>> >> >> [ 0.876682] ACPI: Power Resource [FN03] (off)
>> >> >> [ 0.881022] ACPI: Power Resource [FN04] (off)
>> >> >> [ 0.885681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-
>> fe])
>> >> >> [ 0.891767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig
>> ASPM
>> >> >> ClockPM Segments MSI]
>> >> >> [ 0.900002] acpi PNP0A08:00: _OSC: platform does not support
>> >> >> [PCIeHotplug PME]
>> >> >> [ 0.907216] acpi PNP0A08:00: _OSC: OS now controls [AER
>> >> >> PCIeCapability]
>> >> >> [ 0.914173] PCI host bridge to bus 0000:00
>> >> >> [ 0.918169] pci_bus 0000:00: root bus resource [bus 00-fe]
>> >> >> [ 0.923636] pci_bus 0000:00: root bus resource [io 0x0000-
>> 0x0cf7]
>> >> >> [ 0.929798] pci_bus 0000:00: root bus resource [io 0x0d00-
>> 0xffff]
>> >> >> [ 0.935959] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000a0000-0x000bffff]
>> >> >> [ 0.942817] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000cc000-0x000cffff]
>> >> >> [ 0.949673] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000d0000-0x000d3fff]
>> >> >> [ 0.956530] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000d4000-0x000d7fff]
>> >> >> [ 0.963386] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000d8000-0x000dbfff]
>> >> >> [ 0.970243] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000dc000-0x000dffff]
>> >> >> [ 0.977101] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000e0000-0x000e3fff]
>> >> >> [ 0.983957] pci_bus 0000:00: root bus resource [mem
>> >> >> 0x000e4000-0x000e7fff]
>> >> >> [ 0.990814] pci_bus 0000:00: root bus resource [mem
>> >> >> 0xd0000000-0xfeafffff]
>> >> >> [ 0.997674] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
>> >> >> [ 0.997751] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
>> >> >> [ 0.997831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>> >> >> [ 0.997870] pci 0000:00:01.0: System wakeup disabled by ACPI
>> >> >> [ 1.003450] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
>> >> >> [ 1.003473] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.003502] pci 0000:00:01.1: System wakeup disabled by ACPI
>> >> >> [ 1.009121] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>> >> >> [ 1.009138] pci 0000:00:19.0: reg 0x10: [mem 0xdfb00000-
>> 0xdfb1ffff]
>> >> >> [ 1.009145] pci 0000:00:19.0: reg 0x14: [mem 0xdfb25000-
>> 0xdfb25fff]
>> >> >> [ 1.009153] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
>> >> >> [ 1.009212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.009246] pci 0000:00:19.0: System wakeup disabled by ACPI
>> >> >> [ 1.014835] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>> >> >> [ 1.014854] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb24000-
>> 0xdfb243ff]
>> >> >> [ 1.014938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.014983] pci 0000:00:1a.0: System wakeup disabled by ACPI
>> >> >> [ 1.020571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>> >> >> [ 1.020648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.020686] pci 0000:00:1c.0: System wakeup disabled by ACPI
>> >> >> [ 1.026274] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
>> >> >> [ 1.026351] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.026388] pci 0000:00:1c.4: System wakeup disabled by ACPI
>> >> >> [ 1.031981] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>> >> >> [ 1.032000] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb23000-
>> 0xdfb233ff]
>> >> >> [ 1.032084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.032129] pci 0000:00:1d.0: System wakeup disabled by ACPI
>> >> >> [ 1.037718] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>> >> >> [ 1.037791] pci 0000:00:1e.0: System wakeup disabled by ACPI
>> >> >> [ 1.043379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
>> >> >> [ 1.043532] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>> >> >> [ 1.043549] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
>> >> >> [ 1.043556] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
>> >> >> [ 1.043563] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
>> >> >> [ 1.043570] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
>> >> >> [ 1.043577] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
>> >> >> [ 1.043584] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb22000-
>> 0xdfb227ff]
>> >> >> [ 1.043625] pci 0000:00:1f.2: PME# supported from D3hot
>> >> >> [ 1.043684] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>> >> >> [ 1.043697] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb21000-
>> 0xdfb210ff
>> >> >> 64bit]
>> >> >> [ 1.043716] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
>> >> >> [ 1.043832] pci 0000:00:01.0: PCI bridge to [bus 01]
>> >> >> [ 1.048735] pci 0000:02:00.0: [8086:1572] type 00 class 0x020000
>> >> >> [ 1.048745] pci 0000:02:00.0: reg 0x10: [mem 0xdd800000-
>> 0xddffffff
>> >> >> 64bit pref]
>> >> >> [ 1.048755] pci 0000:02:00.0: reg 0x1c: [mem 0xde808000-
>> 0xde80ffff
>> >> >> 64bit pref]
>> >> >> [ 1.048764] pci 0000:02:00.0: reg 0x30: [mem 0xdfa80000-
>> 0xdfafffff
>> >> >> pref]
>> >> >> [ 1.048800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.048818] pci 0000:02:00.0: reg 0x184: [mem 0xde400000-
>> 0xde40ffff
>> >> >> 64bit pref]
>> >> >> [ 1.048827] pci 0000:02:00.0: reg 0x190: [mem 0xde910000-
>> 0xde913fff
>> >> >> 64bit pref]
>> >> >> [ 1.048862] pci 0000:02:00.1: [8086:1572] type 00 class 0x020000
>> >> >> [ 1.048872] pci 0000:02:00.1: reg 0x10: [mem 0xdd000000-
>> 0xdd7fffff
>> >> >> 64bit pref]
>> >> >> [ 1.048882] pci 0000:02:00.1: reg 0x1c: [mem 0xde800000-
>> 0xde807fff
>> >> >> 64bit pref]
>> >> >> [ 1.048891] pci 0000:02:00.1: reg 0x30: [mem 0xdfa00000-
>> 0xdfa7ffff
>> >> >> pref]
>> >> >> [ 1.048925] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.048942] pci 0000:02:00.1: reg 0x184: [mem 0xde000000-
>> 0xde00ffff
>> >> >> 64bit pref]
>> >> >> [ 1.048951] pci 0000:02:00.1: reg 0x190: [mem 0xde810000-
>> 0xde813fff
>> >> >> 64bit pref]
>> >> >> [ 1.056725] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>> >> >> [ 1.061856] pci 0000:00:01.1: bridge window [mem
>> >> >> 0xdfa00000-0xdfafffff]
>> >> >> [ 1.061858] pci 0000:00:01.1: bridge window [mem
>> >> >> 0xdd000000-0xdeafffff 64bit pref]
>> >> >> [ 1.061915] pci 0000:00:1c.0: PCI bridge to [bus 04]
>> >> >> [ 1.066903] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
>> >> >> [ 1.066942] pci 0000:05:00.0: reg 0x10: [mem 0xdf900000-
>> 0xdf91ffff]
>> >> >> [ 1.066987] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
>> >> >> [ 1.067010] pci 0000:05:00.0: reg 0x1c: [mem 0xdf920000-
>> 0xdf923fff]
>> >> >> [ 1.067239] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
>> >> >> [ 1.067289] pci 0000:05:00.0: System wakeup disabled by ACPI
>> >> >> [ 1.080881] pci 0000:00:1c.4: PCI bridge to [bus 05]
>> >> >> [ 1.085759] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>> >> >> [ 1.085762] pci 0000:00:1c.4: bridge window [mem
>> >> >> 0xdf900000-0xdf9fffff]
>> >> >> [ 1.085807] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
>> >> >> [ 1.085822] pci 0000:06:03.0: reg 0x10: [mem 0xdc000000-
>> 0xdcffffff
>> >> >> pref]
>> >> >> [ 1.085831] pci 0000:06:03.0: reg 0x14: [mem 0xdf800000-
>> 0xdf803fff]
>> >> >> [ 1.085839] pci 0000:06:03.0: reg 0x18: [mem 0xdf000000-
>> 0xdf7fffff]
>> >> >> [ 1.085948] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive
>> >> >> decode)
>> >> >> [ 1.092645] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0xdf000000-0xdf8fffff]
>> >> >> [ 1.092650] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0xdc000000-0xdcffffff 64bit pref]
>> >> >> [ 1.092651] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
>> >> >> (subtractive decode)
>> >> >> [ 1.092652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
>> >> >> (subtractive decode)
>> >> >> [ 1.092653] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000a0000-0x000bffff] (subtractive decode)
>> >> >> [ 1.092655] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000cc000-0x000cffff] (subtractive decode)
>> >> >> [ 1.092656] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000d0000-0x000d3fff] (subtractive decode)
>> >> >> [ 1.092657] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000d4000-0x000d7fff] (subtractive decode)
>> >> >> [ 1.092658] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000d8000-0x000dbfff] (subtractive decode)
>> >> >> [ 1.092659] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000dc000-0x000dffff] (subtractive decode)
>> >> >> [ 1.092660] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000e0000-0x000e3fff] (subtractive decode)
>> >> >> [ 1.092661] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0x000e4000-0x000e7fff] (subtractive decode)
>> >> >> [ 1.092662] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0xd0000000-0xfeafffff] (subtractive decode)
>> >> >> [ 1.092690] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
>> >> >> unsupported)
>> >> >> [ 1.100314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11
>> 12
>> >> >> 14 15)
>> >> >> [ 1.107107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11
>> 12
>> >> >> 14 15)
>> >> >> [ 1.113962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11
>> 12
>> >> >> 14 15)
>> >> >> [ 1.120818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11
>> 12
>> >> >> 14 15)
>> >> >> [ 1.127675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11
>> 12
>> >> >> 14 15)
>> >> >> [ 1.134531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11
>> 12
>> >> >> 14 15) *0, disabled.
>> >> >> [ 1.142515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11
>> 12
>> >> >> 14 15) *0, disabled.
>> >> >> [ 1.150505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11
>> 12
>> >> >> 14 15)
>> >> >> [ 1.157484] ACPI: Enabled 4 GPEs in block 00 to 3F
>> >> >> [ 1.162221] vgaarb: setting as boot device: PCI:0000:06:03.0
>> >> >> [ 1.167794] vgaarb: device added:
>> >> >> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
>> >> >> [ 1.175867] vgaarb: loaded
>> >> >> [ 1.178556] vgaarb: bridge control possible 0000:06:03.0
>> >> >> [ 1.183909] PCI: Using ACPI for IRQ routing
>> >> >> [ 1.193792] PCI: pci_cache_line_size set to 64 bytes
>> >> >> [ 1.193833] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
>> >> >> [ 1.193834] e820: reserve RAM buffer [mem 0xbecc9000-0xbfffffff]
>> >> >> [ 1.193835] e820: reserve RAM buffer [mem 0xce492000-0xcfffffff]
>> >> >> [ 1.193836] e820: reserve RAM buffer [mem 0xce5c7000-0xcfffffff]
>> >> >> [ 1.193837] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
>> >> >> [ 1.193935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0,
>> 0
>> >> >> [ 1.199994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>> >> >> [ 1.207831] Switched to clocksource hpet
>> >> >> [ 1.215086] pnp: PnP ACPI init
>> >> >> [ 1.218096] system 00:00: [mem 0xfed40000-0xfed44fff] has been
>> >> >> reserved
>> >> >> [ 1.224641] system 00:00: Plug and Play ACPI device, IDs PNP0c01
>> >> >> (active)
>> >> >> [ 1.224688] system 00:01: [io 0x0680-0x069f] has been reserved
>> >> >> [ 1.230542] system 00:01: [io 0x1000-0x100f] has been reserved
>> >> >> [ 1.236442] system 00:01: [io 0xffff] has been reserved
>> >> >> [ 1.241736] system 00:01: [io 0xffff] has been reserved
>> >> >> [ 1.247031] system 00:01: [io 0x0400-0x0453] could not be
>> reserved
>> >> >> [ 1.253282] system 00:01: [io 0x0458-0x047f] has been reserved
>> >> >> [ 1.259182] system 00:01: [io 0x0500-0x057f] has been reserved
>> >> >> [ 1.265084] system 00:01: [io 0x164e-0x164f] has been reserved
>> >> >> [ 1.270987] system 00:01: Plug and Play ACPI device, IDs PNP0c02
>> >> >> (active)
>> >> >> [ 1.271008] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
>> >> >> (active)
>> >> >> [ 1.271039] system 00:03: [io 0x0454-0x0457] has been reserved
>> >> >> [ 1.276891] system 00:03: Plug and Play ACPI device, IDs INT3f0d
>> >> >> PNP0c02 (active)
>> >> >> [ 1.276924] system 00:04: [io 0x04d0-0x04d1] has been reserved
>> >> >> [ 1.282792] system 00:04: Plug and Play ACPI device, IDs PNP0c02
>> >> >> (active)
>> >> >> [ 1.282868] system 00:05: [io 0x0a00-0x0a1f] has been reserved
>> >> >> [ 1.288693] system 00:05: [io 0x0a30-0x0a3f] has been reserved
>> >> >> [ 1.294594] system 00:05: Plug and Play ACPI device, IDs PNP0c02
>> >> >> (active)
>> >> >> [ 1.294751] pnp 00:06: [dma 0 disabled]
>> >> >> [ 1.294780] pnp 00:06: Plug and Play ACPI device, IDs PNP0501
>> >> >> (active)
>> >> >> [ 1.294921] pnp 00:07: [dma 0 disabled]
>> >> >> [ 1.294947] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
>> >> >> (active)
>> >> >> [ 1.295019] system 00:08: [io 0x0b00-0x0b7f] has been reserved
>> >> >> [ 1.300845] system 00:08: Plug and Play ACPI device, IDs PNP0c02
>> >> >> (active)
>> >> >> [ 1.300958] pnp 00:09: [dma 0 disabled]
>> >> >> [ 1.300985] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
>> >> >> (active)
>> >> >> [ 1.301064] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001
>> >> >> (active)
>> >> >> [ 1.301198] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been
>> >> >> reserved
>> >> >> [ 1.307720] system 00:0b: [mem 0xfed10000-0xfed17fff] has been
>> >> >> reserved
>> >> >> [ 1.314314] system 00:0b: [mem 0xfed18000-0xfed18fff] has been
>> >> >> reserved
>> >> >> [ 1.320909] system 00:0b: [mem 0xfed19000-0xfed19fff] has been
>> >> >> reserved
>> >> >> [ 1.327506] system 00:0b: [mem 0xe0000000-0xefffffff] has been
>> >> >> reserved
>> >> >> [ 1.334102] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been
>> >> >> reserved
>> >> >> [ 1.340701] system 00:0b: [mem 0xfed90000-0xfed93fff] has been
>> >> >> reserved
>> >> >> [ 1.347295] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been
>> >> >> reserved
>> >> >> [ 1.353892] system 00:0b: [mem 0xff000000-0xffffffff] has been
>> >> >> reserved
>> >> >> [ 1.360488] system 00:0b: [mem 0xfee00000-0xfeefffff] could not
>> be
>> >> >> reserved
>> >> >> [ 1.367430] system 00:0b: [mem 0xd0000000-0xd0000fff] has been
>> >> >> reserved
>> >> >> [ 1.374027] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
>> >> >> (active)
>> >> >> [ 1.374113] pnp: PnP ACPI: found 12 devices
>> >> >> [ 1.384167] pci 0000:00:01.0: PCI bridge to [bus 01]
>> >> >> [ 1.389053] pci 0000:00:01.1: PCI bridge to [bus 02-03]
>> >> >> [ 1.394250] pci 0000:00:01.1: bridge window [mem
>> >> >> 0xdfa00000-0xdfafffff]
>> >> >> [ 1.401020] pci 0000:00:01.1: bridge window [mem
>> >> >> 0xdd000000-0xdeafffff 64bit pref]
>> >> >> [ 1.408745] pci 0000:00:1c.0: PCI bridge to [bus 04]
>> >> >> [ 1.413701] pci 0000:00:1c.4: PCI bridge to [bus 05]
>> >> >> [ 1.418641] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
>> >> >> [ 1.424718] pci 0000:00:1c.4: bridge window [mem
>> >> >> 0xdf900000-0xdf9fffff]
>> >> >> [ 1.431489] pci 0000:00:1e.0: PCI bridge to [bus 06]
>> >> >> [ 1.436435] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0xdf000000-0xdf8fffff]
>> >> >> [ 1.443203] pci 0000:00:1e.0: bridge window [mem
>> >> >> 0xdc000000-0xdcffffff 64bit pref]
>> >> >> [ 1.450929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>> >> >> [ 1.450931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>> >> >> [ 1.450932] pci_bus 0000:00: resource 6 [mem 0x000a0000-
>> 0x000bffff]
>> >> >> [ 1.450933] pci_bus 0000:00: resource 7 [mem 0x000cc000-
>> 0x000cffff]
>> >> >> [ 1.450934] pci_bus 0000:00: resource 8 [mem 0x000d0000-
>> 0x000d3fff]
>> >> >> [ 1.450935] pci_bus 0000:00: resource 9 [mem 0x000d4000-
>> 0x000d7fff]
>> >> >> [ 1.450936] pci_bus 0000:00: resource 10 [mem
>> >> >> 0x000d8000-0x000dbfff]
>> >> >> [ 1.450937] pci_bus 0000:00: resource 11 [mem
>> >> >> 0x000dc000-0x000dffff]
>> >> >> [ 1.450938] pci_bus 0000:00: resource 12 [mem
>> >> >> 0x000e0000-0x000e3fff]
>> >> >> [ 1.450939] pci_bus 0000:00: resource 13 [mem
>> >> >> 0x000e4000-0x000e7fff]
>> >> >> [ 1.450940] pci_bus 0000:00: resource 14 [mem
>> >> >> 0xd0000000-0xfeafffff]
>> >> >> [ 1.450941] pci_bus 0000:02: resource 1 [mem 0xdfa00000-
>> 0xdfafffff]
>> >> >> [ 1.450942] pci_bus 0000:02: resource 2 [mem 0xdd000000-
>> 0xdeafffff
>> >> >> 64bit pref]
>> >> >> [ 1.450943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
>> >> >> [ 1.450944] pci_bus 0000:05: resource 1 [mem 0xdf900000-
>> 0xdf9fffff]
>> >> >> [ 1.450946] pci_bus 0000:06: resource 1 [mem 0xdf000000-
>> 0xdf8fffff]
>> >> >> [ 1.450947] pci_bus 0000:06: resource 2 [mem 0xdc000000-
>> 0xdcffffff
>> >> >> 64bit pref]
>> >> >> [ 1.450948] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
>> >> >> [ 1.450949] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
>> >> >> [ 1.450950] pci_bus 0000:06: resource 6 [mem 0x000a0000-
>> 0x000bffff]
>> >> >> [ 1.450951] pci_bus 0000:06: resource 7 [mem 0x000cc000-
>> 0x000cffff]
>> >> >> [ 1.450952] pci_bus 0000:06: resource 8 [mem 0x000d0000-
>> 0x000d3fff]
>> >> >> [ 1.450953] pci_bus 0000:06: resource 9 [mem 0x000d4000-
>> 0x000d7fff]
>> >> >> [ 1.450954] pci_bus 0000:06: resource 10 [mem
>> >> >> 0x000d8000-0x000dbfff]
>> >> >> [ 1.450955] pci_bus 0000:06: resource 11 [mem
>> >> >> 0x000dc000-0x000dffff]
>> >> >> [ 1.450956] pci_bus 0000:06: resource 12 [mem
>> >> >> 0x000e0000-0x000e3fff]
>> >> >> [ 1.450957] pci_bus 0000:06: resource 13 [mem
>> >> >> 0x000e4000-0x000e7fff]
>> >> >> [ 1.450958] pci_bus 0000:06: resource 14 [mem
>> >> >> 0xd0000000-0xfeafffff]
>> >> >> [ 1.451014] NET: Registered protocol family 2
>> >> >> [ 1.455462] TCP established hash table entries: 262144 (order: 9,
>> >> >> 2097152 bytes)
>> >> >> [ 1.463005] TCP bind hash table entries: 65536 (order: 8, 1048576
>> >> >> bytes)
>> >> >> [ 1.469713] TCP: Hash tables configured (established 262144 bind
>> >> >> 65536)
>> >> >> [ 1.476246] TCP: reno registered
>> >> >> [ 1.479464] UDP hash table entries: 16384 (order: 7, 524288
>> bytes)
>> >> >> [ 1.485680] UDP-Lite hash table entries: 16384 (order: 7, 524288
>> >> >> bytes)
>> >> >> [ 1.492306] NET: Registered protocol family 1
>> >> >> [ 1.496818] PCI: CLS mismatch (64 != 32), using 64 bytes
>> >> >> [ 1.496823] pci 0000:06:03.0: Video device with shadowed ROM
>> >> >> [ 1.496853] Unpacking initramfs...
>> >> >> [ 1.690454] Freeing initrd memory: 15968K (ffff8800360c0000 -
>> >> >> ffff880037058000)
>> >> >> [ 1.697700] PCI-DMA: Using software bounce buffering for IO
>> >> >> (SWIOTLB)
>> >> >> [ 1.704118] software IO TLB [mem 0xca492000-0xce492000] (64MB)
>> >> >> mapped at [ffff8800ca492000-ffff8800ce491fff]
>> >> >> [ 1.714164] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
>> >> >> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>> >> >> [ 1.724674] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.730426] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.736250] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.750730] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.756546] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.762360] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.768179] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.773991] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
>> >> >> [ 1.779835] microcode: Microcode Update Driver: v2.00
>> >> >> <***@aivazian.fsnet.co.uk>, Peter Oruba
>> >> >> [ 1.788826] futex hash table entries: 2048 (order: 5, 131072
>> bytes)
>> >> >> [ 1.795033] audit: initializing netlink subsys (disabled)
>> >> >> [ 1.800388] audit: type=2000 audit(1443100076.548:1): initialized
>> >> >> [ 1.806664] HugeTLB registered 2 MB page size, pre-allocated 0
>> >> >> pages
>> >> >> [ 1.812933] zpool: loaded
>> >> >> [ 1.815517] zbud: loaded
>> >> >> [ 1.818158] VFS: Disk quotas dquot_6.5.2
>> >> >> [ 1.821997] Dquot-cache hash table entries: 512 (order 0, 4096
>> >> >> bytes)
>> >> >> [ 1.828445] msgmni has been set to 32768
>> >> >> [ 1.832595] alg: No test for stdrng (krng)
>> >> >> [ 1.836625] Block layer SCSI generic (bsg) driver version 0.4
>> >> >> loaded (major 252)
>> >> >> [ 1.844014] io scheduler noop registered
>> >> >> [ 1.847878] io scheduler deadline registered
>> >> >> [ 1.852131] io scheduler cfq registered (default)
>> >> >> [ 1.856959] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>> >> >> [ 1.857070] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
>> >> >> [ 1.857283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> >> >> [ 1.862775] pciehp: PCI Express Hot Plug Controller Driver
>> version:
>> >> >> 0.4
>> >> >> [ 1.869391] intel_idle: MWAIT substates: 0x1120
>> >> >> [ 1.869392] intel_idle: v0.4 model 0x3A
>> >> >> [ 1.869393] intel_idle: lapic_timer_reliable_states 0xffffffff
>> >> >> [ 1.869628] ERST: Error Record Serialization Table (ERST) support
>> >> >> is initialized.
>> >> >> [ 1.877034] pstore: Registered erst as persistent store backend
>> >> >> [ 1.882975] GHES: APEI firmware first mode is enabled by WHEA
>> _OSC.
>> >> >> [ 1.889229] Serial: 8250/16550 driver, 4 ports, IRQ sharing
>> enabled
>> >> >> [ 1.915898] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
>> 115200)
>> >> >> is a 16550A
>> >> >> [ 1.943574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
>> 115200)
>> >> >> is a 16550A
>> >> >> [ 1.971232] 00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud =
>> >> >> 115200) is a 16550A
>> >> >> [ 1.978753] Linux agpgart interface v0.103
>> >> >> [ 1.982831] i8042: PNP: No PS/2 controller found. Probing ports
>> >> >> directly.
>> >> >> [ 1.992701] serio: i8042 KBD port at 0x60,0x64 irq 1
>> >> >> [ 1.997575] serio: i8042 AUX port at 0x60,0x64 irq 12
>> >> >> [ 2.002720] mousedev: PS/2 mouse device common for all mice
>> >> >> [ 2.008232] rtc_cmos 00:02: RTC can wake from S4
>> >> >> [ 2.012908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>> >> >> [ 2.018943] rtc_cmos 00:02: alarms up to one month, y3k, 242
>> bytes
>> >> >> nvram, hpet irqs
>> >> >> [ 2.026564] ledtrig-cpu: registered to indicate activity on CPUs
>> >> >> [ 2.032717] AMD IOMMUv2 driver by Joerg Roedel
>> >> >> <***@amd.com>
>> >> >> [ 2.039059] AMD IOMMUv2 functionality not available on this
>> system
>> >> >> [ 2.045283] TCP: cubic registered
>> >> >> [ 2.048521] IPv6: Loaded, but administratively disabled, reboot
>> >> >> required to enable
>> >> >> [ 2.056071] mip6: Mobile IPv6
>> >> >> [ 2.059020] mip6: mip6_init: can't add xfrm type(destopt)
>> >> >> [ 2.064404] NET: Registered protocol family 17
>> >> >> [ 2.068836] mpls_gso: MPLS GSO support
>> >> >> [ 2.072972] registered taskstats version 1
>> >> >> [ 2.077499] rtc_cmos 00:02: setting system clock to 2015-09-24
>> >> >> 13:07:57 UTC (1443100077)
>> >> >> [ 2.085560] PM: Hibernation image not present or could not be
>> >> >> loaded.
>> >> >> [ 2.086094] Freeing unused kernel memory: 1228K (ffffffff818f3000
>> -
>> >> >> ffffffff81a26000)
>> >> >> [ 2.093851] Write protecting the kernel read-only data: 8192k
>> >> >> [ 2.100532] Freeing unused kernel memory: 620K (ffff880001565000
>> -
>> >> >> ffff880001600000)
>> >> >> [ 2.108556] Freeing unused kernel memory: 216K (ffff8800017ca000
>> -
>> >> >> ffff880001800000)
>> >> >> [ 2.123393] udevd[94]: starting version 175
>> >> >> [ 2.131920] pps_core: LinuxPPS API ver. 1 registered
>> >> >> [ 2.136823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
>> >> >> Rodolfo Giometti <***@linux.it>
>> >> >> [ 2.147106] PTP clock support registered
>> >> >> [ 2.151071] ACPI: bus type USB registered
>> >> >> [ 2.155038] usbcore: registered new interface driver usbfs
>> >> >> [ 2.160469] usbcore: registered new interface driver hub
>> >> >> [ 2.165787] usbcore: registered new device driver usb
>> >> >> [ 2.171019] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>> >> >> [ 2.176789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>> >> >> [ 2.182928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>> >> >> Driver
>> >> >> [ 2.189595] ehci-pci: EHCI PCI platform driver
>> >> >> [ 2.194192] i40e: Intel(R) Ethernet Connection XL710 Network
>> Driver
>> >> >> - version 1.3.39.1
>> >> >> [ 2.197599] e1000e 0000:00:19.0: Interrupt Throttling Rate
>> >> >> (ints/sec) set to dynamic conservative mode
>> >> >> [ 2.197641] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> >> >> [ 2.198073] thermal LNXTHERM:00: registered as thermal_zone0
>> >> >> [ 2.198073] ACPI: Thermal Zone [TZ00] (28 C)
>> >> >> [ 2.198216] thermal LNXTHERM:01: registered as thermal_zone1
>> >> >> [ 2.198216] ACPI: Thermal Zone [TZ01] (30 C)
>> >> >> [ 2.231104] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
>> >> >> [ 2.249391] i40e 0000:02:00.0: fw 4.40.35115 api 1.4 nvm 4.53
>> >> >> 0x80001dc0 1.123.0
>> >> >> [ 2.256998] SCSI subsystem initialized
>> >> >> [ 2.261957] libata version 3.00 loaded.
>> >> >> [ 2.453377] e1000e 0000:00:19.0 eth0: registered PHC clock
>> >> >> [ 2.458796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width
>> >> >> x1) 00:25:90:a8:02:51
>> >> >> [ 2.466693] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
>> >> >> Connection
>> >> >> [ 2.473600] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No:
>> >> >> FFFFFF-0FF
>> >> >> [ 2.480564] ehci-pci 0000:00:1a.0: EHCI Host Controller
>> >> >> [ 2.480631] e1000e 0000:05:00.0: Interrupt Throttling Rate
>> >> >> (ints/sec) set to dynamic conservative mode
>> >> >> [ 2.480663] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
>> >> >> [ 2.480665] e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
>> >> >> [ 2.480667] e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
>> >> >> [ 2.495076] ehci-pci 0000:00:1a.0: new USB bus registered,
>> assigned
>> >> >> bus number 1
>> >> >> [ 2.495874] i40e 0000:02:00.0: MAC address: 3c:fd:fe:9c:56:b8
>> >> >> [ 2.499857] i40e 0000:02:00.0: SAN MAC: 3c:fd:fe:9c:56:ba
>> >> >> [ 2.513542] ehci-pci 0000:00:1a.0: debug port 2
>> >> >> [ 2.514095] i40e 0000:02:00.0: irq 30 for MSI/MSI-X
>> >> >> [ 2.514098] i40e 0000:02:00.0: irq 31 for MSI/MSI-X
>> >> >> [ 2.514099] i40e 0000:02:00.0: irq 32 for MSI/MSI-X
>> >> >> [ 2.514101] i40e 0000:02:00.0: irq 33 for MSI/MSI-X
>> >> >> [ 2.514103] i40e 0000:02:00.0: irq 34 for MSI/MSI-X
>> >> >> [ 2.514105] i40e 0000:02:00.0: irq 35 for MSI/MSI-X
>> >> >> [ 2.514107] i40e 0000:02:00.0: irq 36 for MSI/MSI-X
>> >> >> [ 2.514108] i40e 0000:02:00.0: irq 37 for MSI/MSI-X
>> >> >> [ 2.514110] i40e 0000:02:00.0: irq 38 for MSI/MSI-X
>> >> >> [ 2.514111] i40e 0000:02:00.0: irq 39 for MSI/MSI-X
>> >> >> [ 2.514113] i40e 0000:02:00.0: irq 40 for MSI/MSI-X
>> >> >> [ 2.514114] i40e 0000:02:00.0: irq 41 for MSI/MSI-X
>> >> >> [ 2.514116] i40e 0000:02:00.0: irq 42 for MSI/MSI-X
>> >> >> [ 2.514118] i40e 0000:02:00.0: irq 43 for MSI/MSI-X
>> >> >> [ 2.514119] i40e 0000:02:00.0: irq 44 for MSI/MSI-X
>> >> >> [ 2.514121] i40e 0000:02:00.0: irq 45 for MSI/MSI-X
>> >> >> [ 2.514122] i40e 0000:02:00.0: irq 46 for MSI/MSI-X
>> >> >> [ 2.514124] i40e 0000:02:00.0: irq 47 for MSI/MSI-X
>> >> >> [ 2.521951] ehci-pci 0000:00:1a.0: cache line size of 64 is not
>> >> >> supported
>> >> >> [ 2.521964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb24000
>> >> >> [ 2.537912] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>> >> >> [ 2.543607] usb usb1: New USB device found, idVendor=1d6b,
>> >> >> idProduct=0002
>> >> >> [ 2.550333] usb usb1: New USB device strings: Mfr=3, Product=2,
>> >> >> SerialNumber=1
>> >> >> [ 2.557541] usb usb1: Product: EHCI Host Controller
>> >> >> [ 2.562399] usb usb1: Manufacturer: Linux 3.18.20 ehci_hcd
>> >> >> [ 2.568471] usb usb1: SerialNumber: 0000:00:1a.0
>> >> >> [ 2.573164] hub 1-0:1.0: USB hub found
>> >> >> [ 2.576818] hub 1-0:1.0: 2 ports detected
>> >> >> [ 2.580962] ehci-pci 0000:00:1d.0: EHCI Host Controller
>> >> >> [ 2.586095] ehci-pci 0000:00:1d.0: new USB bus registered,
>> assigned
>> >> >> bus number 2
>> >> >> [ 2.593480] ehci-pci 0000:00:1d.0: debug port 2
>> >> >> [ 2.599535] e1000e 0000:05:00.0 eth2: registered PHC clock
>> >> >> [ 2.601911] ehci-pci 0000:00:1d.0: cache line size of 64 is not
>> >> >> supported
>> >> >> [ 2.601922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb23000
>> >> >> [ 2.610602] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width
>> >> >> x1) 00:25:90:a8:02:50
>> >> >> [ 2.613936] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>> >> >> [ 2.613963] usb usb2: New USB device found, idVendor=1d6b,
>> >> >> idProduct=0002
>> >> >> [ 2.613964] usb usb2: New USB device strings: Mfr=3, Product=2,
>> >> >> SerialNumber=1
>> >> >> [ 2.613965] usb usb2: Product: EHCI Host Controller
>> >> >> [ 2.613965] usb usb2: Manufacturer: Linux 3.18.20 ehci_hcd
>> >> >> [ 2.613966] usb usb2: SerialNumber: 0000:00:1d.0
>> >> >> [ 2.614075] hub 2-0:1.0: USB hub found
>> >> >> [ 2.614078] hub 2-0:1.0: 2 ports detected
>> >> >> [ 2.614192] ahci 0000:00:1f.2: version 3.0
>> >> >> [ 2.614340] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
>> >> >> [ 2.614485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3
>> >> >> Gbps 0x3f impl SATA mode
>> >> >> [ 2.614486] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio
>> slum
>> >> >> part ems apst
>> >> >> [ 2.626630] i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width
>> x8
>> >> >> [ 2.654604] scsi host0: ahci
>> >> >> [ 2.654992] i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs:
>> 66
>> >> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>> >> >> [ 2.657763] scsi host1: ahci
>> >> >> [ 2.658083] scsi host2: ahci
>> >> >> [ 2.658320] scsi host3: ahci
>> >> >> [ 2.658546] scsi host4: ahci
>> >> >> [ 2.658747] scsi host5: ahci
>> >> >> [ 2.658785] ata1: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> >> 0xdfb22100 irq 48
>> >> >> [ 2.658788] ata2: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> >> 0xdfb22180 irq 48
>> >> >> [ 2.658790] ata3: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> >> 0xdfb22200 irq 48
>> >> >> [ 2.658792] ata4: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> >> 0xdfb22280 irq 48
>> >> >> [ 2.658795] ata5: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> >> 0xdfb22300 irq 48
>> >> >> [ 2.658798] ata6: SATA max UDMA/133 abar ***@0xdfb22000 port
>> >> >> 0xdfb22380 irq 48
>> >> >> [ 2.670025] i40e 0000:02:00.1: fw 4.40.35115 api 1.4 nvm 4.53
>> >> >> 0x80001dc0 1.123.0
>> >> >> [ 2.714122] tsc: Refined TSC clocksource calibration: 3500.024
>> MHz
>> >> >> [ 2.769612] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network
>> >> >> Connection
>> >> >> [ 2.776551] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No:
>> >> >> FFFFFF-0FF
>> >> >> [ 2.890322] usb 1-1: new high-speed USB device number 2 using
>> >> >> ehci-pci
>> >> >> [ 2.916415] i40e 0000:02:00.1: MAC address: 3c:fd:fe:9c:56:b9
>> >> >> [ 2.926260] i40e 0000:02:00.1: SAN MAC: 3c:fd:fe:9c:56:bb
>> >> >> [ 2.930381] usb 2-1: new high-speed USB device number 2 using
>> >> >> ehci-pci
>> >> >> [ 2.952496] i40e 0000:02:00.1: irq 49 for MSI/MSI-X
>> >> >> [ 2.952503] i40e 0000:02:00.1: irq 50 for MSI/MSI-X
>> >> >> [ 2.952508] i40e 0000:02:00.1: irq 51 for MSI/MSI-X
>> >> >> [ 2.952512] i40e 0000:02:00.1: irq 52 for MSI/MSI-X
>> >> >> [ 2.952516] i40e 0000:02:00.1: irq 53 for MSI/MSI-X
>> >> >> [ 2.952520] i40e 0000:02:00.1: irq 54 for MSI/MSI-X
>> >> >> [ 2.952525] i40e 0000:02:00.1: irq 55 for MSI/MSI-X
>> >> >> [ 2.952537] i40e 0000:02:00.1: irq 56 for MSI/MSI-X
>> >> >> [ 2.952539] i40e 0000:02:00.1: irq 57 for MSI/MSI-X
>> >> >> [ 2.952541] i40e 0000:02:00.1: irq 58 for MSI/MSI-X
>> >> >> [ 2.952543] i40e 0000:02:00.1: irq 59 for MSI/MSI-X
>> >> >> [ 2.952545] i40e 0000:02:00.1: irq 60 for MSI/MSI-X
>> >> >> [ 2.952547] i40e 0000:02:00.1: irq 61 for MSI/MSI-X
>> >> >> [ 2.952549] i40e 0000:02:00.1: irq 62 for MSI/MSI-X
>> >> >> [ 2.952550] i40e 0000:02:00.1: irq 63 for MSI/MSI-X
>> >> >> [ 2.952554] i40e 0000:02:00.1: irq 64 for MSI/MSI-X
>> >> >> [ 2.952556] i40e 0000:02:00.1: irq 65 for MSI/MSI-X
>> >> >> [ 2.952558] i40e 0000:02:00.1: irq 66 for MSI/MSI-X
>> >> >> [ 2.978497] ata5: SATA link down (SStatus 0 SControl 300)
>> >> >> [ 2.983838] ata6: SATA link down (SStatus 0 SControl 300)
>> >> >> [ 2.989225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl
>> 300)
>> >> >> [ 2.995381] ata4: SATA link down (SStatus 0 SControl 300)
>> >> >> [ 3.000756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl
>> 300)
>> >> >> [ 3.007184] ata2: SATA link down (SStatus 0 SControl 300)
>> >> >> [ 3.012510] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> >> succeeded
>> >> >> [ 3.012514] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
>> FREEZE
>> >> >> LOCK) filtered out
>> >> >> [ 3.020391] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> >> CONFIGURATION OVERLAY) filtered out
>> >> >> [ 3.026954] usb 1-1: New USB device found, idVendor=8087,
>> >> >> idProduct=0024
>> >> >> [ 3.026955] usb 1-1: New USB device strings: Mfr=0, Product=0,
>> >> >> SerialNumber=0
>> >> >> [ 3.027240] hub 1-1:1.0: USB hub found
>> >> >> [ 3.027332] hub 1-1:1.0: 6 ports detected
>> >> >> [ 3.050510] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> >> succeeded
>> >> >> [ 3.050512] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
>> FREEZE
>> >> >> LOCK) filtered out
>> >> >> [ 3.061847] i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width
>> x8
>> >> >> [ 3.067012] usb 2-1: New USB device found, idVendor=8087,
>> >> >> idProduct=0024
>> >> >> [ 3.067013] usb 2-1: New USB device strings: Mfr=0, Product=0,
>> >> >> SerialNumber=0
>> >> >> [ 3.067296] hub 2-1:1.0: USB hub found
>> >> >> [ 3.067384] hub 2-1:1.0: 6 ports detected
>> >> >> [ 3.090237] i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs:
>> 66
>> >> >> QP: 8 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB VxLAN PTP VEPA
>> >> >> [ 3.103551] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> >> CONFIGURATION OVERLAY) filtered out
>> >> >> [ 3.112266] ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10250, max
>> >> >> UDMA/133
>> >> >> [ 3.118799] ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth
>> >> >> 31/32)
>> >> >> [ 3.125486] ata3.00: ATAPI: HL-DT-ST DVDRAM GT80N, 1.00, max
>> >> >> UDMA/133
>> >> >> [ 3.132254] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> >> succeeded
>> >> >> [ 3.132259] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
>> FREEZE
>> >> >> LOCK) filtered out
>> >> >> [ 3.140106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> >> CONFIGURATION OVERLAY) filtered out
>> >> >> [ 3.148916] ata1.00: configured for UDMA/133
>> >> >> [ 3.153298] scsi 0:0:0:0: Direct-Access ATA INTEL
>> >> >> SSDSC2BA20 0250 PQ: 0 ANSI: 5
>> >> >> [ 3.154140] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
>> >> >> succeeded
>> >> >> [ 3.154142] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY
>> FREEZE
>> >> >> LOCK) filtered out
>> >> >> [ 3.154143] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
>> >> >> CONFIGURATION OVERLAY) filtered out
>> >> >> [ 3.156130] ata3.00: configured for UDMA/133
>> >> >> [ 3.185352] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N
>> >> >> 1.00 PQ: 0 ANSI: 5
>> >> >> [ 3.298953] usb 1-1.2: new full-speed USB device number 3 using
>> >> >> ehci-pci
>> >> >> [ 3.323219] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks:
>> >> >> (200 GB/186 GiB)
>> >> >> [ 3.330670] sd 0:0:0:0: [sda] Write Protect is off
>> >> >> [ 3.335418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> >> >> [ 3.335427] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> >> >> enabled, doesn't support DPO or FUA
>> >> >> [ 3.338917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
>> >> >> dvd-ram cd/rw xa/form2 cdda tray
>> >> >> [ 3.338918] cdrom: Uniform CD-ROM driver Revision: 3.20
>> >> >> [ 3.339081] sr 2:0:0:0: Attached scsi CD-ROM sr0
>> >> >> [ 3.358408] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> >> >> [ 3.358668] sda: sda1 sda2
>> >> >> [ 3.358886] sd 0:0:0:0: [sda] Attached SCSI disk
>> >> >> [ 3.371134] sr 2:0:0:0: Attached scsi generic sg1 type 5
>> >> >> [ 3.396737] usb 1-1.2: New USB device found, idVendor=0557,
>> >> >> idProduct=2221
>> >> >> [ 3.403526] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
>> >> >> SerialNumber=0
>> >> >> [ 3.410814] usb 1-1.2: Product: Hermon USB hidmouse Device
>> >> >> [ 3.416282] usb 1-1.2: Manufacturer: Winbond Electronics Corp
>> >> >> [ 3.423736] hidraw: raw HID events driver (C) Jiri Kosina
>> >> >> [ 3.430436] usbcore: registered new interface driver usbhid
>> >> >> [ 3.435922] usbhid: USB HID core driver
>> >> >> [ 3.440716] input: Winbond Electronics Corp Hermon USB hidmouse
>> >> >> Device as
>> >> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
>> >> 1.2:1.0/0003:0557:2221.0001/input/input2
>> >> >> [ 3.455434] hid-generic 0003:0557:2221.0001: input,hidraw0: USB
>> HID
>> >> >> v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on
>> >> >> usb-0000:00:1a.0-1.2/input0
>> >> >> [ 3.470147] input: Winbond Electronics Corp Hermon USB hidmouse
>> >> >> Device as
>> >> >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-
>> >> 1.2:1.1/0003:0557:2221.0002/input/input3
>> >> >> [ 3.484849] hid-generic 0003:0557:2221.0002: input,hidraw1: USB
>> HID
>> >> >> v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device]
>> >> >> on usb-0000:00:1a.0-1.2/input1
>> >> >> [ 3.507384] PM: Starting manual resume from disk
>> >> >> [ 3.511922] PM: Hibernation image partition 8:1 present
>> >> >> [ 3.511923] PM: Looking for hibernation image.
>> >> >> [ 3.512127] PM: Image not found (code -22)
>> >> >> [ 3.512131] PM: Hibernation image not present or could not be
>> >> >> loaded.
>> >> >> [ 3.517313] EXT4-fs (sda2): mounting ext3 file system using the
>> >> >> ext4 subsystem
>> >> >> [ 3.529000] EXT4-fs (sda2): mounted filesystem with ordered data
>> >> >> mode. Opts: (null)
>> >> >> [ 3.715841] Switched to clocksource tsc
>> >> >> [ 3.885031] udevd[667]: starting version 175
>> >> >> [ 4.011695] input: Power Button as
>> >> >> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>> >> >> [ 4.020070] ACPI: Power Button [PWRB]
>> >> >> [ 4.023703] input: Power Button as
>> >> >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>> >> >> [ 4.031033] ACPI: Power Button [PWRF]
>> >> >> [ 4.034781] EDAC MC: Ver: 3.0.0
>> >> >> [ 4.038626] EDAC MC0: Giving out device to module ie31200_edac
>> >> >> controller IE31200: DEV 0000:00:00.0 (POLLED)
>> >> >> [ 4.115904] ipmi message handler version 39.2
>> >> >> [ 4.121319] IPMI System Interface driver.
>> >> >> [ 4.126068] ipmi_si: probing via ACPI
>> >> >> [ 4.129851] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
>> >> >> [ 4.135777] i40e 0000:02:00.1 rename5: renamed from eth3
>> >> >> [ 4.141149] ipmi_si: Adding ACPI-specified kcs state machine
>> >> >> [ 4.147092] ipmi_si: probing via SMBIOS
>> >> >> [ 4.147160] input: PC Speaker as
>> >> >> /devices/platform/pcspkr/input/input6
>> >> >> [ 4.157409] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
>> >> >> [ 4.163305] ipmi_si: Adding SMBIOS-specified kcs state machine
>> >> >> duplicate interface
>> >> >> [ 4.170854] ipmi_si: probing via SPMI
>> >> >> [ 4.174504] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
>> >> >> [ 4.177849] i40e 0000:02:00.0 rename3: renamed from eth1
>> >> >> [ 4.185527] ipmi_si: Adding SPMI-specified kcs state machine
>> >> >> [ 4.185655] ACPI Warning: SystemIO range
>> >> >> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
>> >> >> 0x0000000000000400-0x000000000000047F (\PMIO) (20140926/utaddress-
>> 254)
>> >> >> [ 4.185658] ACPI: If an ACPI driver is available for this device,
>> >> >> you should use it instead of the native driver
>> >> >> [ 4.185660] ACPI Warning: SystemIO range
>> >> >> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
>> >> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-
>> 254)
>> >> >> [ 4.185662] ACPI: If an ACPI driver is available for this device,
>> >> >> you should use it instead of the native driver
>> >> >> [ 4.185662] ACPI Warning: SystemIO range
>> >> >> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
>> >> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-
>> 254)
>> >> >> [ 4.185664] ACPI: If an ACPI driver is available for this device,
>> >> >> you should use it instead of the native driver
>> >> >> [ 4.185664] ACPI Warning: SystemIO range
>> >> >> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
>> >> >> 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-
>> 254)
>> >> >> [ 4.185665] ACPI: If an ACPI driver is available for this device,
>> >> >> you should use it instead of the native driver
>> >> >> [ 4.185665] lpc_ich: Resource conflict(s) found affecting
>> gpio_ich
>> >> >> [ 4.280990] iTCO_vendor_support: vendor-support=0
>> >> >> [ 4.304270] duplicate interface
>> >> >> [ 4.307664] ipmi_si: Trying ACPI-specified kcs state machine at
>> i/o
>> >> >> address 0xca2, slave address 0x0, irq 0
>> >> >> [ 4.318187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>> >> >> [ 4.323711] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
>> >> >> TCOBASE=0x0460)
>> >> >> [ 4.323818] e1000e 0000:00:19.0 eth3: renamed from eth0
>> >> >> [ 4.336446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> >> >> [ 4.342474] AVX version of gcm_enc/dec engaged.
>> >> >> [ 4.346907] AES CTR mode by8 optimization enabled
>> >> >> [ 4.351931] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>> >> >> [ 4.352819] alg: No test for __gcm-aes-aesni
>> >> >> (__driver-gcm-aes-aesni)
>> >> >> [ 4.364158] i40e 0000:02:00.1 eth1: renamed from rename5
>> >> >> [ 4.370154] [drm] Initialized drm 1.1.0 20060810
>> >> >> [ 4.374797] Error: Driver 'pcspkr' is already registered,
>> >> >> aborting...
>> >> >> [ 4.381228] alg: No test for crc32 (crc32-pclmul)
>> >> >> [ 4.395990] [TTM] Zone kernel: Available graphics memory:
>> 16494382
>> >> >> kiB
>> >> >> [ 4.396626] i40e 0000:02:00.0 eth0: renamed from rename3
>> >> >> [ 4.407813] [TTM] Zone dma32: Available graphics memory:
>> 2097152
>> >> >> kiB
>> >> >> [ 4.414324] [TTM] Initializing pool allocator
>> >> >> [ 4.418678] [TTM] Initializing DMA pool allocator
>> >> >> [ 4.425605] intel_rapl: Found RAPL domain package
>> >> >> [ 4.430215] intel_rapl: Found RAPL domain core
>> >> >> [ 4.446166] fbcon: mgadrmfb (fb0) is primary device
>> >> >> [ 4.489833] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c,
>> >> >> prod_id: 0x0624, dev_id: 0x20)
>> >> >> [ 4.489843] ipmi_si 00:0a: IPMI kcs interface initialized
>> >> >> [ 4.604074] Console: switching to colour frame buffer device
>> 128x48
>> >> >> [ 4.698245] mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer
>> device
>> >> >> [ 4.704491] mgag200 0000:06:03.0: registered panic notifier
>> >> >> [ 4.733133] [drm] Initialized mgag200 1.0.0 20110418 for
>> >> >> 0000:06:03.0 on minor 0
>> >> >> [ 4.975874] Adding 3905532k swap on /dev/sda1. Priority:-1
>> >> >> extents:1 across:3905532k SSFS
>> >> >> [ 5.002394] EXT4-fs (sda2): re-mounted. Opts: (null)
>> >> >> [ 5.044749] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>> >> >> [ 5.077354] loop: module loaded
>> >> >> [ 5.087636] Ethernet Channel Bonding Driver: v3.7.1 (April 27,
>> >> >> 2011)
>> >> >> [ 5.101990] nf_conntrack version 0.5.0 (17374463 buckets,
>> 138995704
>> >> >> max)
>> >> >> [ 5.108653] nf_conntrack: falling back to vmalloc.
>> >> >> [ 5.735510] random: dd urandom read with 92 bits of entropy
>> >> >> available
>> >> >> [ 5.927034] bond0: Setting xmit hash policy to layer3+4 (1)
>> >> >> [ 5.927105] bond0: Setting MII monitoring interval to 100
>> >> >> [ 5.963685] bond0: Setting LACP rate to slow (0)
>> >> >> [ 6.119830] bond0: Adding slave eth0
>> >> >> [ 6.119841] i40e 0000:02:00.0 eth0: already using mac address
>> >> >> 3c:fd:fe:9c:56:b8
>> >> >> [ 6.123689] i40e 0000:02:00.0 eth0: NIC Link is Up 10 Gbps Full
>> >> >> Duplex, Flow Control: None
>> >> >> [ 6.123746] bond0: Enslaving eth0 as a backup interface with an
>> up
>> >> >> link
>> >> >> [ 6.126208] bond0: Adding slave eth1
>> >> >> [ 6.126212] i40e 0000:02:00.1 eth1: set new mac address
>> >> >> 3c:fd:fe:9c:56:b8
>> >> >> [ 6.135693] i40e 0000:02:00.1 eth1: NIC Link is Up 10 Gbps Full
>> >> >> Duplex, Flow Control: None
>> >> >> [ 6.135756] bond0: Enslaving eth1 as a backup interface with an
>> up
>> >> >> link
>> >> >> [ 7.145905] random: nonblocking pool is initialized
>> >> >> [ 12.460991] Process accounting resumed
>> >> >> [ 12.918920] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> >> >> [ 13.021814] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>> >> >> [ 13.279044] nf_conntrack: falling back to vmalloc.
>> >> >> [ 13.323161] ip_tables: (C) 2000-2006 Netfilter Core Team
>> >> >>
>> >> >> On 2015-08-27 16:43, Rose, Gregory V wrote:
>> >> >>>> -----Original Message-----
>> >> >>>> From: Christian Ruppert [mailto:***@qasl.de]
>> >> >>>> Sent: Thursday, August 27, 2015 4:54 AM
>> >> >>>> To: Fujinaka, Todd
>> >> >>>> Cc: Rose, Gregory V; e1000-***@lists.sf.net
>> >> >>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >> >>>>
>> >> >>>> Well, that's it for now anyway...
>> >> >>>>
>> >> >>>> ...
>> >> >>>> Power cycle is required to complete the update process.
>> >> >>>> Tool execution completed with the following status: All operations
>> >> >>>> completed successfully
>> >> >>>>
>> >> >>>> The card doesn't even appear in "lspci" anymore... :/ I used a
>> Win7
>> >> >>>> to
>> >> >>>> flash it since a co-worker already broke one when flashing via
>> >> >>>> Linux. No
>> >> >>>> idea how to unbrick it.
>> >> >>>
>> >> >>> Christian,
>> >> >>>
>> >> >>> I'm very sorry to hear that. It is pretty rare for this sort of
>> >> >>> thing
>> >> >>> to happen but not unheard of. Please contact ***@intel.com to
>> >> >>> get
>> >> >>> help replacing the part.
>> >> >>>
>> >> >>> - Greg
>> >> >>>
>> >> >>>>
>> >> >>>>
>> >> >>>> On 2015-08-27 01:25, Fujinaka, Todd wrote:
>> >> >>>> > Attachments don't work on this mailing list (though they may
>> have
>> >> >>>> > gotten to Greg). Please file a bug on e1000.sourceforge.net and
>> >> attach
>> >> >>>> > the files there.
>> >> >>>> >
>> >> >>>> > Todd Fujinaka
>> >> >>>> > Software Application Engineer
>> >> >>>> > Networking Division (ND)
>> >> >>>> > Intel Corporation
>> >> >>>> > ***@intel.com
>> >> >>>> > (503) 712-4565
>> >> >>>> >
>> >> >>>> > -----Original Message-----
>> >> >>>> > From: Christian Ruppert [mailto:***@qasl.de]
>> >> >>>> > Sent: Wednesday, August 26, 2015 10:24 AM
>> >> >>>> > To: Rose, Gregory V
>> >> >>>> > Cc: e1000-***@lists.sf.net
>> >> >>>> > Subject: Re: [E1000-devel] X710 / i40e interface resets
>> >> >>>> >
>> >> >>>> > On 2015-08-26 01:19, Rose, Gregory V wrote:
>> >> >>>> >>> -----Original Message-----
>> >> >>>> >>> From: Christian Ruppert [mailto:***@qasl.de]
>> >> >>>> >>> Sent: Friday, August 21, 2015 7:06 AM
>> >> >>>> >>> To: Rose, Gregory V
>> >> >>>> >>> Cc: e1000-***@lists.sf.net
>> >> >>>> >>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >> >>>> >>>
>> >> >>>> >>> On 2015-07-28 18:51, Rose, Gregory V wrote:
>> >> >>>> >>> >> -----Original Message-----
>> >> >>>> >>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> >>>> >>> >> Sent: Tuesday, July 28, 2015 5:43 AM
>> >> >>>> >>> >> To: Rose, Gregory V
>> >> >>>> >>> >> Cc: e1000-***@lists.sf.net
>> >> >>>> >>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >> >>>> >>> >>
>> >> >>>> >>
>> >> >>>> >> [snip]
>> >> >>>> >>
>> >> >>>> >>> > I've been told that the Tx driver issue detected message is
>> due
>> >> to
>> >> >>>> >>> > a MDD (Malicious Driver Detection) event. We need to find
>> out
>> >> what
>> >> >>>> >>> > is causing that so if you could please send me your system
>> log
>> >> and
>> >> >>>> >>> > the output of ethtool <intf> and ethtool -i <intf> perhaps I
>> >> can
>> >> >>>> >>> > see what might be occurring. If not then we'll have to
>> debug
>> >> >>>> further.
>> >> >>>> >>>
>> >> >>>> >>> See the initial Mail for ethtool -k and so on. Also:
>> >> >>>> >>> # ethtool eth0
>> >> >>>> >>> Settings for eth0:
>> >> >>>> >>> Supported ports: [ FIBRE ]
>> >> >>>> >>> Supported link modes: 1000baseT/Full
>> >> >>>> >>> 10000baseT/Full
>> >> >>>> >>> Supported pause frame use: Symmetric
>> >> >>>> >>> Supports auto-negotiation: No
>> >> >>>> >>> Advertised link modes: 1000baseT/Full
>> >> >>>> >>> 10000baseT/Full
>> >> >>>> >>> Advertised pause frame use: No
>> >> >>>> >>> Advertised auto-negotiation: No
>> >> >>>> >>> Speed: 10000Mb/s
>> >> >>>> >>> Duplex: Full
>> >> >>>> >>> Port: FIBRE
>> >> >>>> >>> PHYAD: 0
>> >> >>>> >>> Transceiver: external
>> >> >>>> >>> Auto-negotiation: off
>> >> >>>> >>> Supports Wake-on: d
>> >> >>>> >>> Wake-on: d
>> >> >>>> >>> Current message level: 0x0000000f (15)
>> >> >>>> >>> drv probe link timer
>> >> >>>> >>> Link detected: yes
>> >> >>>> >>> # ethtool -i eth0
>> >> >>>> >>> driver: i40e
>> >> >>>> >>> version: 1.2.48
>> >> >>>> >>> firmware-version: f4.33.31377 a1.2 n4.42 e191b
>> >> >>>> >>> bus-info: 0000:02:00.0
>> >> >>>> >>> supports-statistics: yes
>> >> >>>> >>> supports-test: yes
>> >> >>>> >>> supports-eeprom-access: yes
>> >> >>>> >>> supports-register-dump: yes
>> >> >>>> >>> supports-priv-flags: yes
>> >> >>>> >>
>> >> >>>> >> I also need the output of 'dmesg' - and I need to figure out
>> how
>> >> to
>> >> >>>> >> determine what specific MDD event is occurring. I'll get back
>> to
>> >> you
>> >> >>>> >> with instructions on how to do that when I get the system log
>> from
>> >> >>>> >> you.
>> >> >>>> >
>> >> >>>> > See the attached file. It's a dmesg from boot + some minutes.
>> >> >>>> > I'll upgrade the card's firmware tomorrow I guess and try out
>> the
>> >> new
>> >> >>>> > drivers btw.
>> >> >>>> >
>> >> >>>> >>
>> >> >>>> >> Thanks,
>> >> >>>> >>
>> >> >>>> >> - Greg
>> >> >>>> >
>> >> >>>> > --
>> >> >>>> > Regards,
>> >> >>>> > Christian Ruppert
>> >> >>>>
>> >> >>>> --
>> >> >>>> Regards,
>> >> >>>> Christian Ruppert
>> >>
>> >> --
>> >> Regards,
>> >> Christian Ruppert
>>
>> --
>> Regards,
>> Christian Ruppert

--
Regards,
Christian Ruppert
Rose, Gregory V
2015-10-08 14:23:05 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Wednesday, October 07, 2015 10:54 AM
> To: Rose, Gregory V
> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>
> On 2015-10-07 18:49, Rose, Gregory V wrote:
> >> -----Original Message-----
> >> From: Christian Ruppert [mailto:***@qasl.de]
> >> Sent: Wednesday, October 07, 2015 8:00 AM
> >> To: Rose, Gregory V
> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >>
> >

[snip]

> > Maybe, but first let me ask you if you're using the VEPA mode work
> > around for bonding?
> >
>
> No, just the basic bonding in 802.3ad mode. We don't use VEPA at all.

Can you send me the output of the command "bridge link show"?

Thanks,

- Greg

------------------------------------------------------------------------------
Christian Ruppert
2015-10-08 14:34:10 UTC
Permalink
On 2015-10-08 16:23, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Wednesday, October 07, 2015 10:54 AM
>> To: Rose, Gregory V
>> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> On 2015-10-07 18:49, Rose, Gregory V wrote:
>> >> -----Original Message-----
>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> Sent: Wednesday, October 07, 2015 8:00 AM
>> >> To: Rose, Gregory V
>> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>
>> >
>
> [snip]
>
>> > Maybe, but first let me ask you if you're using the VEPA mode work
>> > around for bonding?
>> >
>>
>> No, just the basic bonding in 802.3ad mode. We don't use VEPA at all.
>
> Can you send me the output of the command "bridge link show"?

3: eth0 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500
master bond0 hwmode VEPA
5: eth1 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500
master bond0 hwmode VEPA

hm, now that's interesting...

>
> Thanks,
>
> - Greg

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Rose, Gregory V
2015-10-08 15:05:57 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Thursday, October 08, 2015 7:34 AM
> To: Rose, Gregory V
> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>
> On 2015-10-08 16:23, Rose, Gregory V wrote:
> >> -----Original Message-----
> >> From: Christian Ruppert [mailto:***@qasl.de]
> >> Sent: Wednesday, October 07, 2015 10:54 AM
> >> To: Rose, Gregory V
> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >>
> >> On 2015-10-07 18:49, Rose, Gregory V wrote:
> >> >> -----Original Message-----
> >> >> From: Christian Ruppert [mailto:***@qasl.de]
> >> >> Sent: Wednesday, October 07, 2015 8:00 AM
> >> >> To: Rose, Gregory V
> >> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> >> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >> >>
> >> >
> >
> > [snip]
> >
> >> > Maybe, but first let me ask you if you're using the VEPA mode work
> >> > around for bonding?
> >> >
> >>
> >> No, just the basic bonding in 802.3ad mode. We don't use VEPA at all.
> >
> > Can you send me the output of the command "bridge link show"?
>
> 3: eth0 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 master
> bond0 hwmode VEPA
> 5: eth1 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 master
> bond0 hwmode VEPA
>
> hm, now that's interesting...

That is exactly what we want to see. The XL710/X710 controllers have an internal switch for when SR-IOV mode is used so that all the VFs on that controller can communicate with each other across the bridge. If the hwmode had been VEB then that would indicate a problem. However, you're in the correct internal switch mode for LACP operation.

Please try turning off TSO/GSO to see if that helps.

If not can I get you to enter a bug ticket at the Intel SF site?

Please include the following:

Results of 'ethtool -i' on each X710 interface.
Results of 'ehtool' on each X710 interface.
Results of 'ip link show' and 'ip addr show'.
The system log obtained via 'dmesg' *after* the error has occurred.

That should get us started.

Thanks!

- Greg

>
> >
> > Thanks,
> >
> > - Greg
>
> --
> Regards,
> Christian Ruppert

------------------------------------------------------------------------------
Christian Ruppert
2015-10-15 11:01:59 UTC
Permalink
On 2015-10-08 17:05, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Thursday, October 08, 2015 7:34 AM
>> To: Rose, Gregory V
>> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> On 2015-10-08 16:23, Rose, Gregory V wrote:
>> >> -----Original Message-----
>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> Sent: Wednesday, October 07, 2015 10:54 AM
>> >> To: Rose, Gregory V
>> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >>
>> >> On 2015-10-07 18:49, Rose, Gregory V wrote:
>> >> >> -----Original Message-----
>> >> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> >> Sent: Wednesday, October 07, 2015 8:00 AM
>> >> >> To: Rose, Gregory V
>> >> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> >> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> >> >>
>> >> >
>> >
>> > [snip]
>> >
>> >> > Maybe, but first let me ask you if you're using the VEPA mode work
>> >> > around for bonding?
>> >> >
>> >>
>> >> No, just the basic bonding in 802.3ad mode. We don't use VEPA at all.
>> >
>> > Can you send me the output of the command "bridge link show"?
>>
>> 3: eth0 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500
>> master
>> bond0 hwmode VEPA
>> 5: eth1 state UP : <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500
>> master
>> bond0 hwmode VEPA
>>
>> hm, now that's interesting...
>
> That is exactly what we want to see. The XL710/X710 controllers have
> an internal switch for when SR-IOV mode is used so that all the VFs on
> that controller can communicate with each other across the bridge. If
> the hwmode had been VEB then that would indicate a problem. However,
> you're in the correct internal switch mode for LACP operation.
>
> Please try turning off TSO/GSO to see if that helps.

That seems to help. No more resets. Do you want me to enable TSO or GSO
again to see which one exactly cause those resets? Or do you want me to
do anything else?

>
> If not can I get you to enter a bug ticket at the Intel SF site?
>
> Please include the following:
>
> Results of 'ethtool -i' on each X710 interface.
> Results of 'ehtool' on each X710 interface.
> Results of 'ip link show' and 'ip addr show'.
> The system log obtained via 'dmesg' *after* the error has occurred.
>
> That should get us started.
>
> Thanks!
>
> - Greg
>
>>
>> >
>> > Thanks,
>> >
>> > - Greg
>>
>> --
>> Regards,
>> Christian Ruppert

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Rose, Gregory V
2015-10-20 23:30:05 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Thursday, October 15, 2015 4:02 AM
> To: Rose, Gregory V
> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>
> On 2015-10-08 17:05, Rose, Gregory V wrote:
> >> -----Original Message-----
> >> From: Christian Ruppert [mailto:***@qasl.de]
> >> Sent: Thursday, October 08, 2015 7:34 AM
> >> To: Rose, Gregory V
> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> > Please try turning off TSO/GSO to see if that helps.
>
> That seems to help. No more resets. Do you want me to enable TSO or GSO
> again to see which one exactly cause those resets? Or do you want me to do
> anything else?
>

Sorry for the delayed response but I've been out of the office for the last week.

Yes, please do try disabling TSO and GSO separately - I suspect that internally to the driver it won't make a difference but if it does then it would be good to know.

Thanks!

- Greg


------------------------------------------------------------------------------
Christian Ruppert
2015-10-23 07:34:03 UTC
Permalink
On 2015-10-21 01:30, Rose, Gregory V wrote:
>> -----Original Message-----
>> From: Christian Ruppert [mailto:***@qasl.de]
>> Sent: Thursday, October 15, 2015 4:02 AM
>> To: Rose, Gregory V
>> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>
>> On 2015-10-08 17:05, Rose, Gregory V wrote:
>> >> -----Original Message-----
>> >> From: Christian Ruppert [mailto:***@qasl.de]
>> >> Sent: Thursday, October 08, 2015 7:34 AM
>> >> To: Rose, Gregory V
>> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>> > Please try turning off TSO/GSO to see if that helps.
>>
>> That seems to help. No more resets. Do you want me to enable TSO or
>> GSO
>> again to see which one exactly cause those resets? Or do you want me
>> to do
>> anything else?
>>
>
> Sorry for the delayed response but I've been out of the office for the
> last week.

No problem! ;)

>
> Yes, please do try disabling TSO and GSO separately - I suspect that
> internally to the driver it won't make a difference but if it does
> then it would be good to know.

You seem to be right, no resets, nothing unusual currently.

>
> Thanks!
>
> - Greg

--
Regards,
Christian Ruppert

------------------------------------------------------------------------------
Christian Ruppert
2015-11-09 09:17:20 UTC
Permalink
On 2015-10-23 09:34, Christian Ruppert wrote:
> On 2015-10-21 01:30, Rose, Gregory V wrote:
>>> -----Original Message-----
>>> From: Christian Ruppert [mailto:***@qasl.de]
>>> Sent: Thursday, October 15, 2015 4:02 AM
>>> To: Rose, Gregory V
>>> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>>> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>>
>>> On 2015-10-08 17:05, Rose, Gregory V wrote:
>>> >> -----Original Message-----
>>> >> From: Christian Ruppert [mailto:***@qasl.de]
>>> >> Sent: Thursday, October 08, 2015 7:34 AM
>>> >> To: Rose, Gregory V
>>> >> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
>>> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
>>> > Please try turning off TSO/GSO to see if that helps.
>>>
>>> That seems to help. No more resets. Do you want me to enable TSO or
>>> GSO
>>> again to see which one exactly cause those resets? Or do you want me
>>> to do
>>> anything else?
>>>
>>
>> Sorry for the delayed response but I've been out of the office for the
>> last week.
>
> No problem! ;)
>
>>
>> Yes, please do try disabling TSO and GSO separately - I suspect that
>> internally to the driver it won't make a difference but if it does
>> then it would be good to know.
>
> You seem to be right, no resets, nothing unusual currently.
>
>>
>> Thanks!
>>
>> - Greg

The system is running about a month without any resets but having TSO
and GSO disabled. Does it have a performance impact with TSO/GSO
disabled, or any other disadvantages? We haven't done any benchmarks
yet.

--
Regards,
Christian Ruppert
Rose, Gregory V
2015-11-09 15:57:49 UTC
Permalink
> -----Original Message-----
> From: Christian Ruppert [mailto:***@qasl.de]
> Sent: Monday, November 09, 2015 1:17 AM
> To: Rose, Gregory V
> Cc: Fujinaka, Todd; e1000-***@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
>

>
> The system is running about a month without any resets but having TSO and
> GSO disabled. Does it have a performance impact with TSO/GSO disabled, or
> any other disadvantages? We haven't done any benchmarks yet.

Yes, I'm certain there are performance disadvantages with certain traffic profiles. However, I've been pulled off of this issue and working others for the last few weeks. I do hope to get back to this.

Thanks,

- Greg

>
> --
> Regards,
> Christian Ruppert
Loading...